Buying from board member (bisquick65) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sigurd · 11-04-2005, 08:11 PM

Anyone ever buy anything from this guy? What kind of experiance did you have?

Thanks,
James

sdkid · 11-04-2005, 09:11 PM

I bought some door visors from him. Easy to deal with. No hesitation to purchase from again.

zeeklu · 11-04-2005, 09:22 PM

I bought some rivits and had no problems. Chris

**too much stuff** · 11-05-2005, 12:13 AM

I bought some small parts from him with no problems. Seems pretty good to deal with.

HeavyD · 11-05-2005, 02:07 AM

I am sure I have bought stuff from him too. No problems with any board members yet.

rwgregory · 11-05-2005, 04:06 AM

I have bought parts from him. He's honest and a straight shooter. Would have
no problem dealing with him again.

JimKshortstep4x4 · 11-05-2005, 07:19 AM

I bought some parts from him and found him easy to deal with and very helpful. I would certainly buy from him again!

Jim

vtblazer · 11-05-2005, 07:39 AM

Just do it!

Good prices, good parts, great shipping time.
"this guy" sells alot of parts through the board, no worries. IMO.

67-72williso · 11-05-2005, 08:27 AM

I bought a 67 clip from them, they even did some driving to make the connection. GOOD GUYS

Later Willis

GMC AMI · 11-05-2005, 09:10 AM

I bought a starter, A1! Now if he only would remember the cab trim I was promised. LOL, must be a club member of CRS also! JK, you can trust him without worries!

eagle23 · 11-05-2005, 11:15 AM

I bought a number of parts from him a year ago. Great guy to deal with. Good prices, and he's fair.

Do it!!!

Brian

chops333 · 11-05-2005, 04:22 PM

i bought a short wheel base frame from him they even delivered it eric and his brother are good guys they know there stuff im sure ill do business with them again dont hesitatate to buy from them todd

**GSFMECH** · 11-05-2005, 08:01 PM

Eric is a stand up guy, he does what he says he will do and his parts are as described. I bought a headliner from him a few months ago and you should have seen the measures he took to keep it from being damaged in shipment. A great guy to deal with you won't be sorry.

Mike

billsbowtie · 11-05-2005, 10:59 PM

i have bought/sold/traded with eric and his brother could not ask for better guys to deal with. just about everyone i have delt with on the board has been good. bill

Putter · 11-08-2005, 04:16 PM

I have dealt with him too....can't remember what it was...but never had a second of hesitation. Would not think twice about doing it again!!!

*bisquik65* · 11-08-2005, 10:51 PM

Here i am....Thanks to all who have bought parts from me,I have tons more here waiting to be put on your trucks/and mabye cars...

I have had a tough time here lately and i am working on fixing it up shortly,I have a few members that are awaiting refunds,soon to be fixed...I had some parts here that someone else helped themselves to while i was gone...for a while...I had to put up video cameras here

There are no jobs in this (mitchell ) county n.c. and they take anything of value if its outside,

I just did these parts on the side while at work,I work at home now,towing cars with my 81 chevy wrecker,I fix them too,i put motors in ,anything mechanical ,and i do body and paint work here too...All right at home...I keep busy at times,I am here to stay for all of you great members here....

And i am LS665BIS on EBAY so look at my parts on there too...If you need anything,a good chance a hate it,or know where it is....There are all kinds of muscle cars on the creek banks here....I will post pics...of them soon...

Thanks to all......Erick Bisquik65

RainFade · 01-14-2006, 10:30 PM

Just recently completed another deal with him and yet again stuff is at least as good as promised, shipping time rocks and he is just generally a great guy to deal with

11-04-2005, 08:11 PM	#1
sigurd Registered User Join Date: Mar 2000 Location: San Diego, CA USA Posts: 344	Buying from board member (bisquick65) Anyone ever buy anything from this guy? What kind of experiance did you have? Thanks, James __________________ --------- 72 SWB K10 San Diego CA

11-04-2005, 09:11 PM	#2
sdkid Registered User Join Date: Sep 2004 Location: Pierre SD Posts: 1,533	Re: Buying from board member (bisquick65) I bought some door visors from him. Easy to deal with. No hesitation to purchase from again. __________________ I think the world needs a drink... Help somebody...If you can....VanZant We're not wrong, we're not sorry, and its probably gonna happen again. That's the truth about men. Tracy Byrd Member# 13924 '70 c10, 350/350 '68 c10 250/4spd '68 c10 no eng/trans fac ps/pb/ac/at (future father/sons project) '48 Chevy Loadmaster

11-04-2005, 09:22 PM	#3
zeeklu Registered User Join Date: Dec 1999 Location: Northwest NJ Posts: 746	Re: Buying from board member (bisquick65) I bought some rivits and had no problems. Chris

11-05-2005, 12:13 AM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,813	Re: Buying from board member (bisquick65) I bought some small parts from him with no problems. Seems pretty good to deal with. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-05-2005, 02:07 AM	#5
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Re: Buying from board member (bisquick65) I am sure I have bought stuff from him too. No problems with any board members yet. __________________ "You can take the man out of PA, but you can't take PA out of the man"

11-05-2005, 04:06 AM	#6
rwgregory Registered User Join Date: Apr 2005 Location: Chula Vista, California Posts: 495	Re: Buying from board member (bisquick65) I have bought parts from him. He's honest and a straight shooter. Would have no problem dealing with him again. __________________ rwgregory 67 GMC 2500 ,2w/d wide box 305 V-6, 4-speed

11-05-2005, 07:19 AM	#7
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Buying from board member (bisquick65) I bought some parts from him and found him easy to deal with and very helpful. I would certainly buy from him again! Jim

11-05-2005, 07:39 AM	#8
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Buying from board member (bisquick65) Just do it! Good prices, good parts, great shipping time. "this guy" sells alot of parts through the board, no worries. IMO.

11-05-2005, 08:27 AM	#9
67-72williso Junk/Daily Driver Club Join Date: Feb 2004 Location: Manheim, PA 17545 Posts: 253	Re: Buying from board member (bisquick65) I bought a 67 clip from them, they even did some driving to make the connection. GOOD GUYS Later Willis __________________ Daily Driver: 1970 C-20 400 sbc,sm-465,Dana 61 one ton SRW rear, 3.07 gears, locker. There are three kinds of people: those who make things happen, those who watch things happen, and those who have no idea what happened!

11-05-2005, 09:10 AM	#10
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	Re: Buying from board member (bisquick65) I bought a starter, A1! Now if he only would remember the cab trim I was promised. LOL, must be a club member of CRS also! JK, you can trust him without worries! __________________ 1968 Chevy 4x4 307 4 speed

11-05-2005, 11:15 AM	#11
eagle23 Active Member Join Date: Feb 2004 Location: Atlanta GA Posts: 174	Re: Buying from board member (bisquick65) I bought a number of parts from him a year ago. Great guy to deal with. Good prices, and he's fair. Do it!!! Brian

11-05-2005, 04:22 PM	#12
chops333 Registered User Join Date: Aug 2005 Location: mount airy n.c. Posts: 243	Re: Buying from board member (bisquick65) i bought a short wheel base frame from him they even delivered it eric and his brother are good guys they know there stuff im sure ill do business with them again dont hesitatate to buy from them todd Last edited by chops333; 11-05-2005 at 04:22 PM.

11-05-2005, 08:01 PM	#13
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: Buying from board member (bisquick65) Eric is a stand up guy, he does what he says he will do and his parts are as described. I bought a headliner from him a few months ago and you should have seen the measures he took to keep it from being damaged in shipment. A great guy to deal with you won't be sorry. Mike __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

11-05-2005, 10:59 PM	#14
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Buying from board member (bisquick65) i have bought/sold/traded with eric and his brother could not ask for better guys to deal with. just about everyone i have delt with on the board has been good. bill

11-08-2005, 04:16 PM	#15
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Buying from board member (bisquick65) I have dealt with him too....can't remember what it was...but never had a second of hesitation. Would not think twice about doing it again!!! __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**



Register or Log In To remove these advertisements.

11-08-2005, 10:51 PM	#16
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Re: Buying from board member (bisquick65) Here i am....Thanks to all who have bought parts from me,I have tons more here waiting to be put on your trucks/and mabye cars... I have had a tough time here lately and i am working on fixing it up shortly,I have a few members that are awaiting refunds,soon to be fixed...I had some parts here that someone else helped themselves to while i was gone...for a while...I had to put up video cameras here There are no jobs in this (mitchell ) county n.c. and they take anything of value if its outside, I just did these parts on the side while at work,I work at home now,towing cars with my 81 chevy wrecker,I fix them too,i put motors in ,anything mechanical ,and i do body and paint work here too...All right at home...I keep busy at times,I am here to stay for all of you great members here.... And i am LS665BIS on EBAY so look at my parts on there too...If you need anything,a good chance a hate it,or know where it is....There are all kinds of muscle cars on the creek banks here....I will post pics...of them soon... Thanks to all......Erick Bisquik65

01-14-2006, 10:30 PM	#17
RainFade Registered User Join Date: Nov 2004 Location: Central Ohio Posts: 215	Re: Buying from board member (bisquick65) Just recently completed another deal with him and yet again stuff is at least as good as promised, shipping time rocks and he is just generally a great guy to deal with __________________ 71 K20 350/350/205, dealer air, 4" lift, Flowtech,Edel 1406 on 2101, procomp HEI,4.10's, 33x12.50x16.5 BFG MT's on slots. 4 wheel disc brakes. My lame K20 page My lame Eaton disc brake page

Register or Log In To remove these advertisements.