Quality of repop 67-8 Radiator Supports - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*FormerMember* · 01-14-2006, 06:55 PM

Ok, so I got my frint clip disassembled to be blasted.

The radiator support has the rot in the usual places. Do I got for a re-pop or repair what I have.

If you have a repop, what did it take to get it to work? What brand did you buy?

Bob Moore · 01-14-2006, 09:50 PM

I don't know the extent of the rot but I saw on GMC Paul's (IIR) a core support patch panel for the rot under the battery box. I think it was Paul's that had it. Unless the core is tweaked from a wreck, this looked like a good option.

Good luck - Bob

*FormerMember* · 01-14-2006, 10:11 PM

I looked around, couldn't find it.

Have a link?

Thanks much, this made my day!

*1969owner* · 01-14-2006, 10:16 PM

i have a good one ill sell you for $20, no rust anywhere on it, its really good.

*1969owner* · 01-14-2006, 10:47 PM

my radiator supports a gmc, i just realised. got two lights on each side. sorry!

*FormerMember* · 01-14-2006, 11:56 PM

Found it on Brother's site:

http://www.brothersonlinestore.com/p...number=RSP72RH

Looks about perfect for what I need to do:

Too bad it's not for a 67-8

**raggedjim** · 01-16-2006, 12:42 PM

Grendel, I think the only difference is it won't have the bolt holes for the front apron that goes on a 67-68... If that's the case you could weld it in and then drill holes in it where needed for to use bolts with nuts to attach the apron.

Rg

01-14-2006, 06:55 PM	#1
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Quality of repop 67-8 Radiator Supports Ok, so I got my frint clip disassembled to be blasted. The radiator support has the rot in the usual places. Do I got for a re-pop or repair what I have. If you have a repop, what did it take to get it to work? What brand did you buy?

01-14-2006, 09:50 PM	#2
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: Quality of repop 67-8 Radiator Supports I don't know the extent of the rot but I saw on GMC Paul's (IIR) a core support patch panel for the rot under the battery box. I think it was Paul's that had it. Unless the core is tweaked from a wreck, this looked like a good option. Good luck - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

01-14-2006, 10:11 PM	#3
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Quality of repop 67-8 Radiator Supports I looked around, couldn't find it. Have a link? Thanks much, this made my day!

01-14-2006, 10:16 PM	#4
1969owner Account Suspended Join Date: Dec 2005 Location: martin georgia Posts: 568	Re: Quality of repop 67-8 Radiator Supports i have a good one ill sell you for $20, no rust anywhere on it, its really good.

01-14-2006, 10:47 PM	#5
1969owner Account Suspended Join Date: Dec 2005 Location: martin georgia Posts: 568	Re: Quality of repop 67-8 Radiator Supports my radiator supports a gmc, i just realised. got two lights on each side. sorry!

01-14-2006, 11:56 PM	#6
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Quality of repop 67-8 Radiator Supports Found it on Brother's site: http://www.brothersonlinestore.com/p...number=RSP72RH Looks about perfect for what I need to do: Too bad it's not for a 67-8 Last edited by FormerMember; 01-14-2006 at 11:56 PM.

01-16-2006, 12:42 PM	#7
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,562	Re: Quality of repop 67-8 Radiator Supports Grendel, I think the only difference is it won't have the bolt holes for the front apron that goes on a 67-68... If that's the case you could weld it in and then drill holes in it where needed for to use bolts with nuts to attach the apron. Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer - https://67-72chevytrucks.com/vboard/...d.php?t=856475 '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.