'67 Power Steering - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Bob B.** · 01-24-2006, 08:33 PM

I have a friend that wants to add integral type power steering to a '67 Chevy C-10. He bought a bracket kit for '60-'66 trucks that he was told will work on a '67 and early '68 truck as well. The instructions say that the steering shaft needs to be shortened, but it appears that it might be the right length already. I know that the '67-up manual box has a longer shaft on it than a '60-'66. Maybe the shaft only needs to be cut on '60-'66's? My power steering '67 G.M.C. also has the mechanical box with a long shaft on it.

01-24-2006, 08:33 PM	#1
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,381	'67 Power Steering I have a friend that wants to add integral type power steering to a '67 Chevy C-10. He bought a bracket kit for '60-'66 trucks that he was told will work on a '67 and early '68 truck as well. The instructions say that the steering shaft needs to be shortened, but it appears that it might be the right length already. I know that the '67-up manual box has a longer shaft on it than a '60-'66. Maybe the shaft only needs to be cut on '60-'66's? My power steering '67 G.M.C. also has the mechanical box with a long shaft on it. __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.