Chassis and/or Parts For Sale - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

terrym5 · 01-01-2006, 08:29 PM

no not yet do you have one if so let me know thanks terry

NitroMike · 01-02-2006, 11:22 AM

I'm in need of a "high-hump" bolt-in trans tunnel. I understand the big block automatics had them without a shifter cutout. Know where I might find one of those. Will take one from a manual with a hole, but would prefer "no hole".
Thanks.

*72longbed* · 01-08-2006, 08:39 PM

ttt for cheyenne10

*72longbed* · 01-25-2006, 05:25 PM

Updated Parts!

*72longbed* · 01-29-2006, 05:47 PM

Anybody want to make any offers before all of these parts go on E-Bay?

All of this will be sold ASAP.

Thanks,
72longbed

8bolt · 02-01-2006, 12:44 AM

72longbed how much for all the c20 front suspension parts without the crossmember shipped to 55605

*72longbed* · 02-01-2006, 11:00 AM

8Bolt,
the front suspension is still together with the frame rails and front crossmember. I have no way of knowing what the shipping cost would be until the crossmember is separated from the truck. I prefer to leave the suspension parts together with the front crossmember so that the entire unit can be strapped to a palat and shipped that way. Also the front end has been precisely aligned to that crossmember and its just easier to handle the suspension as a unit. I do not want to disassemble all of the front end parts for this sale, keeping them together as a unit is more desirable for the buyer also.
I would be willing to sell you all of the front suspension, dust cap to dust cap and everything in between, but it will include the front crossmember also.

Maybe some of the other members can offer input on what the unit would weigh strapped to a palat, then we can figure the cheapest way to get it to you. I'll work with you best that I can. There's all, really good new parts in the front suspension.

Thanks,
72longbed

67ChevyRedneck · 02-01-2006, 11:33 AM

Do you still have the ECE sway bar? Is it for a stock truck or lowered (the brackets). Was it for a c20? Will it fit on a C10? Dumb question, but it's for coil spring front ends, right? Does it include ALL mounting hardwared for a truck that did not come with a sway bar?

*72longbed* · 02-01-2006, 12:15 PM

67ChevyRedneck,
I still have the ECE swaybar. Its for either a C10 or C20. Its 1 1/4" in diameter, so it will work much better than the stock units. All of the Poly-Graphite bushings and all of the new brackets and Grade 8 bolts are included with the sale. This bar and brackets will bolt right up to your 67-72 coil spring truck. The brackets will fit stock or lowered trucks, the only difference is: for the lowered trucks some companies use a shorter front pair of brackets so the sway bar doesn't hang down as far across the front. If you really want the shorter front brackets, they are available from ECE for cheap.

Let me know if you want it ASAP before the entire front end gets sold please.

Thanks,
72longbed

67ChevyRedneck · 02-01-2006, 12:22 PM

Will you take $115 + shipping

*72longbed* · 02-01-2006, 01:13 PM

67CRN,
yes, I'll do it for 115.00 plus shipping. I'll PM you with my address and when the Money Order arrives, the sway bar and hardware will be shipped. Please send me your address in advance so I can calculate the shipping by UPS ground.

Thanks,
72longbed

Southedisto · 02-01-2006, 01:50 PM

Do you have the insides to that hub?

*72longbed* · 02-01-2006, 02:59 PM

Yes, the hub is complete. All you need is the snap ring that holds it onto the axle shaft.

Thanks,
72longbed

01-01-2006, 08:29 PM	#51
terrym5 Registered User Join Date: Oct 2005 Location: canada Posts: 15	Re: Chassis and/or Parts For Sale no not yet do you have one if so let me know thanks terry

01-02-2006, 11:22 AM	#52
NitroMike Active Member Join Date: Dec 2005 Location: Bethlehem, PA Posts: 346	Re: Chassis and/or Parts For Sale I'm in need of a "high-hump" bolt-in trans tunnel. I understand the big block automatics had them without a shifter cutout. Know where I might find one of those. Will take one from a manual with a hole, but would prefer "no hole". Thanks. __________________ The older I get, the faster I was!!

01-08-2006, 08:39 PM	#53
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: Chassis and/or Parts For Sale ttt for cheyenne10

01-25-2006, 05:25 PM	#54
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: Chassis and/or Parts For Sale Updated Parts!

01-29-2006, 05:47 PM	#55
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: Chassis and/or Parts For Sale Anybody want to make any offers before all of these parts go on E-Bay? All of this will be sold ASAP. Thanks, 72longbed

02-01-2006, 12:44 AM	#56
8bolt Registered User Join Date: May 2005 Location: COLD COUNTY Posts: 168	Re: Chassis and/or Parts For Sale 72longbed how much for all the c20 front suspension parts without the crossmember shipped to 55605

02-01-2006, 11:00 AM	#57
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: Chassis and/or Parts For Sale 8Bolt, the front suspension is still together with the frame rails and front crossmember. I have no way of knowing what the shipping cost would be until the crossmember is separated from the truck. I prefer to leave the suspension parts together with the front crossmember so that the entire unit can be strapped to a palat and shipped that way. Also the front end has been precisely aligned to that crossmember and its just easier to handle the suspension as a unit. I do not want to disassemble all of the front end parts for this sale, keeping them together as a unit is more desirable for the buyer also. I would be willing to sell you all of the front suspension, dust cap to dust cap and everything in between, but it will include the front crossmember also. Maybe some of the other members can offer input on what the unit would weigh strapped to a palat, then we can figure the cheapest way to get it to you. I'll work with you best that I can. There's all, really good new parts in the front suspension. Thanks, 72longbed

02-01-2006, 11:33 AM	#58
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Chassis and/or Parts For Sale Do you still have the ECE sway bar? Is it for a stock truck or lowered (the brackets). Was it for a c20? Will it fit on a C10? Dumb question, but it's for coil spring front ends, right? Does it include ALL mounting hardwared for a truck that did not come with a sway bar? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 02-01-2006 at 11:34 AM.

02-01-2006, 12:15 PM	#59
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: Chassis and/or Parts For Sale 67ChevyRedneck, I still have the ECE swaybar. Its for either a C10 or C20. Its 1 1/4" in diameter, so it will work much better than the stock units. All of the Poly-Graphite bushings and all of the new brackets and Grade 8 bolts are included with the sale. This bar and brackets will bolt right up to your 67-72 coil spring truck. The brackets will fit stock or lowered trucks, the only difference is: for the lowered trucks some companies use a shorter front pair of brackets so the sway bar doesn't hang down as far across the front. If you really want the shorter front brackets, they are available from ECE for cheap. Let me know if you want it ASAP before the entire front end gets sold please. Thanks, 72longbed

02-01-2006, 12:22 PM	#60
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Chassis and/or Parts For Sale Will you take $115 + shipping __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

02-01-2006, 01:13 PM	#61
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: Chassis and/or Parts For Sale 67CRN, yes, I'll do it for 115.00 plus shipping. I'll PM you with my address and when the Money Order arrives, the sway bar and hardware will be shipped. Please send me your address in advance so I can calculate the shipping by UPS ground. Thanks, 72longbed

02-01-2006, 01:50 PM	#62
Southedisto River life...... Join Date: Oct 2005 Location: Soldotna AK Posts: 1,078	Re: Chassis and/or Parts For Sale Do you have the insides to that hub? __________________ I like wheelin in Dixie!

02-01-2006, 02:59 PM	#63
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: Chassis and/or Parts For Sale Yes, the hub is complete. All you need is the snap ring that holds it onto the axle shaft. Thanks, 72longbed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.