C-Notch and Adjustable Rear Panhard Arm Question?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wildmanaaron · 09-19-2002, 11:14 PM

I was wondering how low you can lower a 71 Truck with coil springs down before you have to install a C-Notch or an adjustable panhard rod? I was getting ready to order some lowering parts and didn't want to cut up my freshly coated frame if I didn't have to!

Thanks!!

Jeff M. · 09-20-2002, 12:02 AM

With about 5 1/2" drop I needed the adjustable pan hard bar. No C-notch, but I did cut an inch or more from the rubber bumpers so it won't be hitting them as quickly.

09-19-2002, 11:14 PM	#1
wildmanaaron Registered User Join Date: Mar 2002 Location: Bowling Green, KY Posts: 396	C-Notch and Adjustable Rear Panhard Arm Question?? I was wondering how low you can lower a 71 Truck with coil springs down before you have to install a C-Notch or an adjustable panhard rod? I was getting ready to order some lowering parts and didn't want to cut up my freshly coated frame if I didn't have to! Thanks!!

09-20-2002, 12:02 AM	#2
Jeff M. Registered User Join Date: Feb 2000 Location: Pixley, Ca. Posts: 487	With about 5 1/2" drop I needed the adjustable pan hard bar. No C-notch, but I did cut an inch or more from the rubber bumpers so it won't be hitting them as quickly. __________________ 69 C-10 CST Short Fleet, Factory Air, BB427-400 Auto-2400 stall-tilt-cruise-Tach & Vac Gagues, 4/6 drop, power one piece side windows, Eaton posi.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.