Parting 84 GMC Suburban - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70GMCer · 02-26-2006, 08:24 AM

Parting this 84 burb out. No motor or trans. Will not ship big items. Wheels, tires & front suspension are already spoken for (me). I have no way of checking if any mechanical or electrical parts work or not. So, sold as is, so ask questions. Paypal or MO only.....

Hood (without ornament) $10.00
Fenders complete w/inners (solid) $25.00 Ea.

Tilt Steering column complete w/key (no steering wheel) $30.00
Complete Steering wheel w/horn button $20.00 + shipping

Rear A/C system $50.00
4 complete straight doors w/pwr locks & windows $150.00 Left doors are newer replacements.

If you're looking for anything else on this truck, ask.......

steve

70GMCer · 02-26-2006, 08:25 AM

more

Burnsman · 02-26-2006, 09:34 AM

Tilt column w/ key $30. I'm interested. What's shipping to 16335? Thanks. Brian

70GMCer · 02-26-2006, 09:47 AM

Sorry, I won't be shipping the column.

webbes · 02-26-2006, 12:30 PM

Looking for the wiring harness that goes to the back that comes out of bulkhead.
Bill

70GMCer · 02-26-2006, 01:15 PM

bottom of doors. 1st is left front, then left rear, then right front and then right rear.

70GMCer · 02-26-2006, 01:18 PM

webbes, can you be a little more exact? I'm not to familiar with these trucks. Are you talking about the harness from the dash to the rear of the truck? How does that come out? Where do I look for it?

Steve

webbes · 02-26-2006, 06:09 PM

by the master cylinder and steering shaft. It comes in two pieces and a bolt in the center screws it to the bulkhead that goes through the fire wire. Bill

70GMCer · 02-27-2006, 02:21 PM

that wiring looks to be all chewed up......I wouldn't use it....

70GMCer · 03-01-2006, 06:58 PM

parts are still available before they start going to ebay.......

70GMCer · 03-07-2006, 04:59 PM

ttt

**Ironhorse** · 03-07-2006, 11:38 PM

What kind of shape is the dash pad in? Any cracks, tears or breaks? How much $$$ and will you ship the dash if in good shape?

70GMCer · 03-08-2006, 01:12 PM

The dash is toast. The PO had installed a nice dash cover made by "Coverlay". If interest, let me know. Here's pics. This is in like new condition. I'm asking $25.00 + shipping. These go for well over $120.00 new.

steve

**Ironhorse** · 03-08-2006, 10:46 PM

Don't have any experience with the overlays so can't really judge how it would fit. Is the surface a "hard" plastic feel, is it noticeable when installed that it is not OEM pad? Any idea as to shipping cost to 67152 zip? Thanks for your reply.

Army_Dude · 03-09-2006, 12:02 AM

Sorry to hijack, but to answer Ironhorse. I got a cover IDENTICAL to that one. It was in my 85 when I bought it. Yes it has the "hard" feel to it. It looks really clean installed (like a new dash) but it's not factory. Mine doesn't seem to want to fit right on my left corner but I'm positive I could use some type of adhesive and straighten it out. Well worth what he's asking, he's right about the price of a new one.

70GMCer · 03-09-2006, 05:27 PM

Shipping to you would be around $15.00. That's assuming I can get it packed within the oversize limit. I take Paypal or Postal MO. PM me if interested....

TwinTurbo · 03-10-2006, 03:26 PM

Hi, what do you want for the drivers side headlight ss trim piece??

70GMCer · 03-10-2006, 07:54 PM

I was wanting to sell all 4 pieces as a group. They are in nice shape. $25.00 + shipping.....

ALASKA ALUMINUM BEAR · 03-12-2006, 05:02 PM

Hello 70

Does Both Your Front Doors-have The Carpet Pieces On The Lower Section And If So Is The Chrome Trim There---its Held On Buy Just Fold Over Metal--and Can I Buy This From You--need It Bad...i'll Buy The Entire Piece With Carpet And All If Need Be--and I'll Take Those 2 Door Front Pockets If I Can Please....
Thanks
John
You Can Pm Me

ALASKA ALUMINUM BEAR · 03-12-2006, 05:14 PM

Hello Again
Will You Sell The 2 Front Head Lite Bezels To Me As Well----and If The Dash Mold Piece Will Fit A 86 Burb I'll Take That Too.
Please Let Me Know
Thanks
John
Aab

soleeagle · 03-12-2006, 06:07 PM

I am looking for the flange that goes on the top of the steering box that hooks the stearing shaft to the box. If I had to I would be interested in the whole steering shaft. There are only 2 bolts hat hold the shaft in, One at the bottom of the steering column and the other at the top of the steering box. How much for the part and how much to ship it?

powder2 · 03-12-2006, 07:49 PM

how much u want for the emblems on the fender

70GMCer · 03-13-2006, 08:22 AM

Sorry, the column shaft assembly is sold.

power2...the right side fender emblem is missing the "Diesel" name badge that mounts under the other emblem. The left side is complete. Both are in good condition. If I can remove these without removing the fenders, $15.00 + shipping. I don't want to have to remove the fenders until they are sold. PM me if interested.

02-26-2006, 08:24 AM	#1
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Parting 84 GMC Suburban Parting this 84 burb out. No motor or trans. Will not ship big items. Wheels, tires & front suspension are already spoken for (me). I have no way of checking if any mechanical or electrical parts work or not. So, sold as is, so ask questions. Paypal or MO only..... Hood (without ornament) $10.00 Fenders complete w/inners (solid) $25.00 Ea. Tilt Steering column complete w/key (no steering wheel) $30.00 Complete Steering wheel w/horn button $20.00 + shipping Rear A/C system $50.00 4 complete straight doors w/pwr locks & windows $150.00 Left doors are newer replacements. If you're looking for anything else on this truck, ask....... steve Attached Images __________________ 1997 GMC Sierra Ext 1965 Mustang Last edited by 70GMCer; 03-05-2006 at 07:46 AM.

02-26-2006, 08:25 AM	#2
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Parting 84 GMC Suburban more Attached Images __________________ 1997 GMC Sierra Ext 1965 Mustang Last edited by 70GMCer; 02-26-2006 at 08:31 AM.

02-26-2006, 09:34 AM	#3
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: Parting 84 GMC Suburban Tilt column w/ key $30. I'm interested. What's shipping to 16335? Thanks. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

02-26-2006, 09:47 AM	#4
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Parting 84 GMC Suburban Sorry, I won't be shipping the column. __________________ 1997 GMC Sierra Ext 1965 Mustang

02-26-2006, 12:30 PM	#5
webbes Registered User Join Date: Oct 2005 Location: ILL. Posts: 129	Re: Parting 84 GMC Suburban Looking for the wiring harness that goes to the back that comes out of bulkhead. Bill

02-26-2006, 01:15 PM	#6
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Parting 84 GMC Suburban bottom of doors. 1st is left front, then left rear, then right front and then right rear. Attached Images __________________ 1997 GMC Sierra Ext 1965 Mustang

02-26-2006, 01:18 PM	#7
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Parting 84 GMC Suburban webbes, can you be a little more exact? I'm not to familiar with these trucks. Are you talking about the harness from the dash to the rear of the truck? How does that come out? Where do I look for it? Steve __________________ 1997 GMC Sierra Ext 1965 Mustang

02-26-2006, 06:09 PM	#8
webbes Registered User Join Date: Oct 2005 Location: ILL. Posts: 129	Re: Parting 84 GMC Suburban by the master cylinder and steering shaft. It comes in two pieces and a bolt in the center screws it to the bulkhead that goes through the fire wire. Bill

02-27-2006, 02:21 PM	#9
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Parting 84 GMC Suburban that wiring looks to be all chewed up......I wouldn't use it.... __________________ 1997 GMC Sierra Ext 1965 Mustang

03-01-2006, 06:58 PM	#10
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Parting 84 GMC Suburban parts are still available before they start going to ebay....... __________________ 1997 GMC Sierra Ext 1965 Mustang

03-07-2006, 04:59 PM	#11
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Parting 84 GMC Suburban ttt __________________ 1997 GMC Sierra Ext 1965 Mustang

03-07-2006, 11:38 PM	#12
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Parting 84 GMC Suburban What kind of shape is the dash pad in? Any cracks, tears or breaks? How much $$$ and will you ship the dash if in good shape? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

03-08-2006, 01:12 PM	#13
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Parting 84 GMC Suburban The dash is toast. The PO had installed a nice dash cover made by "Coverlay". If interest, let me know. Here's pics. This is in like new condition. I'm asking $25.00 + shipping. These go for well over $120.00 new. steve Attached Images __________________ 1997 GMC Sierra Ext 1965 Mustang

03-08-2006, 10:46 PM	#14
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Parting 84 GMC Suburban Don't have any experience with the overlays so can't really judge how it would fit. Is the surface a "hard" plastic feel, is it noticeable when installed that it is not OEM pad? Any idea as to shipping cost to 67152 zip? Thanks for your reply. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

03-09-2006, 12:02 AM	#15
Army_Dude Registered User Join Date: Dec 2005 Location: Fayetteville, NC Posts: 187	Re: Parting 84 GMC Suburban Sorry to hijack, but to answer Ironhorse. I got a cover IDENTICAL to that one. It was in my 85 when I bought it. Yes it has the "hard" feel to it. It looks really clean installed (like a new dash) but it's not factory. Mine doesn't seem to want to fit right on my left corner but I'm positive I could use some type of adhesive and straighten it out. Well worth what he's asking, he's right about the price of a new one.



Register or Log In To remove these advertisements.

03-09-2006, 05:27 PM	#16
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Parting 84 GMC Suburban Shipping to you would be around $15.00. That's assuming I can get it packed within the oversize limit. I take Paypal or Postal MO. PM me if interested.... __________________ 1997 GMC Sierra Ext 1965 Mustang

03-10-2006, 03:26 PM	#17
TwinTurbo Registered User Join Date: Sep 2003 Location: The Netherlands Posts: 994	Re: Parting 84 GMC Suburban Hi, what do you want for the drivers side headlight ss trim piece??

03-10-2006, 07:54 PM	#18
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Parting 84 GMC Suburban I was wanting to sell all 4 pieces as a group. They are in nice shape. $25.00 + shipping..... __________________ 1997 GMC Sierra Ext 1965 Mustang

03-12-2006, 05:02 PM	#19
ALASKA ALUMINUM BEAR Registered User Join Date: Mar 2004 Posts: 129	Re: Parting 84 GMC Suburban Hello 70 Does Both Your Front Doors-have The Carpet Pieces On The Lower Section And If So Is The Chrome Trim There---its Held On Buy Just Fold Over Metal--and Can I Buy This From You--need It Bad...i'll Buy The Entire Piece With Carpet And All If Need Be--and I'll Take Those 2 Door Front Pockets If I Can Please.... Thanks John You Can Pm Me

03-12-2006, 05:14 PM	#20
ALASKA ALUMINUM BEAR Registered User Join Date: Mar 2004 Posts: 129	Re: Parting 84 GMC Suburban Hello Again Will You Sell The 2 Front Head Lite Bezels To Me As Well----and If The Dash Mold Piece Will Fit A 86 Burb I'll Take That Too. Please Let Me Know Thanks John Aab

03-12-2006, 06:07 PM	#21
soleeagle Registered User Join Date: Sep 2003 Location: Shelbyville, Indiana Posts: 614	Re: Parting 84 GMC Suburban I am looking for the flange that goes on the top of the steering box that hooks the stearing shaft to the box. If I had to I would be interested in the whole steering shaft. There are only 2 bolts hat hold the shaft in, One at the bottom of the steering column and the other at the top of the steering box. How much for the part and how much to ship it? __________________ Chuck '85 Chevy Silverado 4X4 '91 Chevy 4X4 Suburban http://www.cardomain.com/memberpage/545941

03-12-2006, 07:49 PM	#22
powder2 Registered User Join Date: Oct 2003 Location: Abilene Texas Posts: 287	Re: Parting 84 GMC Suburban how much u want for the emblems on the fender

03-13-2006, 08:22 AM	#23
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Parting 84 GMC Suburban Sorry, the column shaft assembly is sold. power2...the right side fender emblem is missing the "Diesel" name badge that mounts under the other emblem. The left side is complete. Both are in good condition. If I can remove these without removing the fenders, $15.00 + shipping. I don't want to have to remove the fenders until they are sold. PM me if interested. __________________ 1997 GMC Sierra Ext 1965 Mustang

Register or Log In To remove these advertisements.