Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-28-2006, 05:05 PM | #1 |
what happened to flint mi
Join Date: Oct 2005
Location: san diego
Posts: 436
|
are chevy 6 lugs all the same?
are modern chevy 6 lugs the same as the ones on my blazer 4x4?
__________________
71 swb 2wd fleet frame off in progress 72 4x4 blazer daily driver 70 olds cutlass s mint condition owned by a grandma 56 gmc 2wd project waitng 97 fiance mobile Last edited by tom71; 03-28-2006 at 05:06 PM. |
03-28-2006, 05:18 PM | #2 |
Registered User
Join Date: Mar 2003
Location: Northern Illinois
Posts: 2,181
|
Re: are chevy 6 lugs all the same?
In terms of circle diameter, yes. In fact, I put (temporarily) modern 6-lug rims on my '60.
The part that didn't quite match was the size of the hole in the middle for the spindle to stick out of. The modern one was a hair smaller than the old one. Not a big deal with these rims, but it might matter with fancy alloys. Brian |
03-28-2006, 05:30 PM | #3 |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,468
|
Re: are chevy 6 lugs all the same?
Agreed, some wheels need to be OPENED UP for lack of a better word
for the locking hubs to slide through them and bolt up, but the pattern is the same as far as the bolt circle, what wheels are you thinking of ? *Beware of the backspacing to clear things such as brakes / suspension
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 03-28-2006 at 05:31 PM. |
03-28-2006, 06:15 PM | #4 |
what happened to flint mi
Join Date: Oct 2005
Location: san diego
Posts: 436
|
Re: are chevy 6 lugs all the same?
im thinking of some cheap ones , craigs list, ect just want to know what to look out for ! any suggestions?
__________________
71 swb 2wd fleet frame off in progress 72 4x4 blazer daily driver 70 olds cutlass s mint condition owned by a grandma 56 gmc 2wd project waitng 97 fiance mobile Last edited by tom71; 03-28-2006 at 06:20 PM. |
03-28-2006, 06:38 PM | #5 |
Registered User
Join Date: Mar 2003
Location: Northern Illinois
Posts: 2,181
|
Re: are chevy 6 lugs all the same?
The ones that I got were from a 3/4 ton van. Butt ugly, but definitely cheap -- $15 each WITH TIRE
Brian |
03-28-2006, 06:49 PM | #6 |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,468
|
Re: are chevy 6 lugs all the same?
You can usually find these around $100 or less w/ out the rings
and centers, I have seen them go as low as $50 a set. (15 x 8)
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
03-29-2006, 01:17 PM | #7 |
Registered User
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 215
|
Re: are chevy 6 lugs all the same?
i got those for my 82' $25 a piece, with 4 center's and 3 rings. still pefer the alcoa's on my 72'
look good on it toooo -Cameron
__________________
1972 Dark blue, Cst, Highlander Last edited by ClassicStyle; 03-29-2006 at 01:17 PM. |
03-30-2006, 01:10 AM | #8 |
what happened to flint mi
Join Date: Oct 2005
Location: san diego
Posts: 436
|
Re: are chevy 6 lugs all the same?
ok how about aftermarket alloys any pics
__________________
71 swb 2wd fleet frame off in progress 72 4x4 blazer daily driver 70 olds cutlass s mint condition owned by a grandma 56 gmc 2wd project waitng 97 fiance mobile |
03-30-2006, 02:37 AM | #9 |
Registered User
Join Date: Mar 2006
Location: Kansas
Posts: 865
|
Re: are chevy 6 lugs all the same?
I had problems with the spacing when i tried to put 94 alloys on a 77 k-10. they wanted to drag on the calipers.
|
03-30-2006, 10:01 AM | #10 |
Senior Member
Join Date: Jun 2001
Location: Shelbyville, KY
Posts: 3,261
|
Re: are chevy 6 lugs all the same?
All chevy 6 lug wheels ARE NOT THE SAME!!! Found that out the hard way. The standard 6 lug wheels on a pre 71 truck do not have the same internal contour so that when you bolt them onto a 4x4 chev Blazer, they will bind off on the front brake caliper when you tighten them. So I would assume you need to be careful with any 6 lug you consider for the stepback spacing.
Had a blazer on my 4 poster lift--tried to just push it off the ramp and thought the brakes were just rusted in place so I started towing the blazer off with my Kubota tractor--it towed the entire 4 poster lift with the blazer on it~~~~~~across the barn floor! |
03-30-2006, 11:51 AM | #11 |
13lazers' blazers
Join Date: Jul 2005
Location: San Pedro, CA
Posts: 152
|
Re: are chevy 6 lugs all the same?
the bolt pattern is 6 on 5.5" center to center of opposing studs. same as lexus, toyota, some datsuns, and others im sure. the centerbores and offsets are another matter. i recently found out that the bolt patterns are somewhat standardized for most car companies. a few like mopar and some europeans use oddball patterns. i have an extra set of 17's from a lexus lx 470 that look ok. but i need adapters at about $40 each on the rear of my c5 to move them out an inch or so before i can run them.
|
Bookmarks |
|
|