Engine Block Heater - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Medicanman71* · 04-24-2006, 06:57 AM

Who has one? better yet, who has pics?

I have one and i'm not sure if it's factory or not but i know they were an option. I've never used mine but i've found the elec. socket behind the bumper. I'm glad i dont need to use it living where i do, but i've be afraid too

greg trucker 24 · 04-25-2006, 08:21 PM

its factory i have a 72 from colorado its got one

*Medicanman71* · 04-25-2006, 08:27 PM

Seems like not too many people have these???

Do i have a rare factory option here?!?!

(was it listed on the glove box)

k-nuts · 04-25-2006, 10:35 PM

Mine has a plug coming from the side of the engine. PO bought from CO. Not listed on the glove box. I looked at a 72 Blazer that had a plug coming out of a box inline with the heater hoses (or radiator I don't remember)

Don't need it here either!

vtblazer · 04-26-2006, 07:01 AM

Couple different version's were made/used.

They could be installed in the block (good/best)
or inline with the heater lines (ok)
or have a magnetic one that was put under the oil pan (ok/sorta)
or the dip-stick version.

*Medicanman71* · 04-26-2006, 07:41 AM

How do i tell which i have? I havent in a loonnnggggg time, but last time i checked, i'm almost sure it looked like the wires eventually ran into the block (From the plug)

Where these usually DIY aftermarket, dealer, or factory?

thanks man!

04-24-2006, 06:57 AM	#1
Medicanman71 Account Suspended Join Date: May 2005 Location: Where the Wild Things Are Posts: 696	Engine Block Heater Who has one? better yet, who has pics? I have one and i'm not sure if it's factory or not but i know they were an option. I've never used mine but i've found the elec. socket behind the bumper. I'm glad i dont need to use it living where i do, but i've be afraid too

04-25-2006, 08:21 PM	#2
greg trucker 24 Registered User Join Date: Jul 2005 Location: LEXINGTON MASS Posts: 19	Re: Engine Block Heater its factory i have a 72 from colorado its got one

04-25-2006, 08:27 PM	#3
Medicanman71 Account Suspended Join Date: May 2005 Location: Where the Wild Things Are Posts: 696	Re: Engine Block Heater Seems like not too many people have these??? Do i have a rare factory option here?!?! (was it listed on the glove box) Last edited by Medicanman71; 04-25-2006 at 08:27 PM.

04-25-2006, 10:35 PM	#4
k-nuts Registered User Join Date: Feb 2006 Location: TX Posts: 252	Re: Engine Block Heater Mine has a plug coming from the side of the engine. PO bought from CO. Not listed on the glove box. I looked at a 72 Blazer that had a plug coming out of a box inline with the heater hoses (or radiator I don't remember) Don't need it here either! Last edited by k-nuts; 04-25-2006 at 10:35 PM.

04-26-2006, 07:01 AM	#5
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Engine Block Heater Couple different version's were made/used. They could be installed in the block (good/best) or inline with the heater lines (ok) or have a magnetic one that was put under the oil pan (ok/sorta) or the dip-stick version.

04-26-2006, 07:41 AM	#6
Medicanman71 Account Suspended Join Date: May 2005 Location: Where the Wild Things Are Posts: 696	Re: Engine Block Heater How do i tell which i have? I havent in a loonnnggggg time, but last time i checked, i'm almost sure it looked like the wires eventually ran into the block (From the plug) Where these usually DIY aftermarket, dealer, or factory? thanks man!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.