|
05-05-2006, 05:47 PM
|
#1 |
|
Blue 67
Join Date: Apr 2004
Location: Western WA
Posts: 1,179
|
Need help again!
OK!, It is time to put things back together. All front disc parts are ready (new or cleaned and painted) . Now my question is: I am putting the A-arms and shaft assembly back togther. I believe the end nuts on shaft assembly just bolts on the shaft, I just have to force them through the A-arms holes. Is this right? Thanks.
P.S : you are gona hear a lot until I finish with this swap 
__________________
1953 GMC 3/4 ton: current project 1967 C20: 5.3 voretc with T5 conversion, 4 wheel 8 lug disc brake 1972 Nova: my 4 door sport sedan! 5.3 voretc + T5 conversion. drivable project, FUN!! 1979 Camaro Z28: 5.3 vortec conversion with build TH350: drivable project, Fun to drive 1992 Camaro RS convertible (Z28 clone): 5.3 conversion with build T5: on going project 2005 Silverado 2500, 4x4 Duramax, original owner |
|
|
|
05-05-2006, 06:48 PM
|
#2 |
|
Gone Fishing
Join Date: Aug 2005
Location: Fort Worth, Texas 76135
Posts: 12,361
|
Re: Need help again!
put the shaft in the a- arm and the crew the caps on
__________________
68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop  Frame of resto has been started2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616 |
|
|
|
|
05-05-2006, 07:05 PM
|
#3 |
|
Blue 67
Join Date: Apr 2004
Location: Western WA
Posts: 1,179
|
Re: Need help again!
That's what it looks like to be. I just wanted to be sure. Thanks
__________________
1953 GMC 3/4 ton: current project 1967 C20: 5.3 voretc with T5 conversion, 4 wheel 8 lug disc brake 1972 Nova: my 4 door sport sedan! 5.3 voretc + T5 conversion. drivable project, FUN!! 1979 Camaro Z28: 5.3 vortec conversion with build TH350: drivable project, Fun to drive 1992 Camaro RS convertible (Z28 clone): 5.3 conversion with build T5: on going project 2005 Silverado 2500, 4x4 Duramax, original owner |
|
|
|
|
05-05-2006, 07:31 PM
|
#4 |
|
Gone Fishing
Join Date: Aug 2005
Location: Fort Worth, Texas 76135
Posts: 12,361
|
Re: Need help again!
No prob. Just make sure that the shfts cap screws on straight and not coked at a angle.
__________________
68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
