Brake Line Junction, 1969 K5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Baketown Scotty** · 07-07-2006, 05:04 PM

I recently added longer brake lines in the front from frame rails to wheels due to new lift. Have a leak at the junction block on inside of frame rail, drivers side. It's hard to see with motor and all in the way. I'm thinking I either installed or did not install one of those copper washers in the correct place. Any one have an exploded view of this? Service manual does not show it. Does it go: bolt, copper washer, junction block, etc? Or: bolt, junction block, copper washer?

LUV2XCLR8 · 07-07-2006, 05:09 PM

Can't help ya on that, but I can say we need more pic's of your rig

bjm1981c · 07-21-2006, 05:51 PM

i just pulled mine apart for a leaking line and it goes bolt, washer, junction block, and then washer. There should be two washers total, one on each side of the junction block.

**Baketown Scotty** · 07-21-2006, 07:14 PM

I guess it comes apart tomorrow to see if I did it right. It's only 107 in the garage. Does NAPA carry those washers? Thanks a lot for the info.

72gmcshorty · 07-21-2006, 07:48 PM

Yes NAPA should have them. They come on that help rack in a little box.

makovai · 07-22-2006, 11:37 AM

I just bought a kit with braided lines. I'll open it up and scan the directions if there's is a diagram.

**Baketown Scotty** · 07-24-2006, 11:14 AM

That was my problem. One copper washer missing. Thanks everyone.

07-07-2006, 05:04 PM	#1
Baketown Scotty Junior Member Join Date: Oct 2005 Location: Bakersfield, CA Posts: 314	Brake Line Junction, 1969 K5 I recently added longer brake lines in the front from frame rails to wheels due to new lift. Have a leak at the junction block on inside of frame rail, drivers side. It's hard to see with motor and all in the way. I'm thinking I either installed or did not install one of those copper washers in the correct place. Any one have an exploded view of this? Service manual does not show it. Does it go: bolt, copper washer, junction block, etc? Or: bolt, junction block, copper washer?

07-07-2006, 05:09 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Brake Line Junction, 1969 K5 Can't help ya on that, but I can say we need more pic's of your rig __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-21-2006, 05:51 PM	#3
bjm1981c Registered User Join Date: Oct 2005 Location: West Springfield. MA Posts: 6	Re: Brake Line Junction, 1969 K5 i just pulled mine apart for a leaking line and it goes bolt, washer, junction block, and then washer. There should be two washers total, one on each side of the junction block. __________________ '69 K20 w/350 4spd '67 Camaro w/327 powerglide '94 MZ470

07-21-2006, 07:14 PM	#4
Baketown Scotty Junior Member Join Date: Oct 2005 Location: Bakersfield, CA Posts: 314	Re: Brake Line Junction, 1969 K5 I guess it comes apart tomorrow to see if I did it right. It's only 107 in the garage. Does NAPA carry those washers? Thanks a lot for the info.

07-21-2006, 07:48 PM	#5
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	Re: Brake Line Junction, 1969 K5 Yes NAPA should have them. They come on that help rack in a little box. __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

07-22-2006, 11:37 AM	#6
makovai Senior Member Join Date: Feb 2006 Location: oregon city Posts: 335	Re: Brake Line Junction, 1969 K5 I just bought a kit with braided lines. I'll open it up and scan the directions if there's is a diagram. __________________ If it aint broke..............fix it till it is. www.fast77.com 1972 - 330 hp crate, 11" lift with 39x18 mickeys. 3/4 ton, cross steer, 4 wheel disc brakes 1996 Z71 w/ 35's

07-24-2006, 11:14 AM	#7
Baketown Scotty Junior Member Join Date: Oct 2005 Location: Bakersfield, CA Posts: 314	Re: Brake Line Junction, 1969 K5 That was my problem. One copper washer missing. Thanks everyone.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.