parting out 68 LWB - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68 short step · 08-01-2006, 08:49 PM

Quote:

Originally Posted by bean

If you're interested in breaking up the front clip I'd take the inner fenders.

ok.... im to the parting out point.... the pass fender is rotted all the way through where it connects to the rad support, the dr side appers to be good.. ill take 40$ for the pair....or 10$ for pass side and 30$ for dr side

dirtball · 08-01-2006, 09:00 PM

I can't tell if the pieces in the attic picture are the painted or the bright aluminum or stainless(whatever they are) type. If they are not the painted ones I would like those and the side trim. Please give me a total to 80521 and your mailing address so I can get payment to you. Is a postal money order OK with you?Thanks, Brett

68 short step · 08-01-2006, 09:09 PM

Quote:

Originally Posted by dirtball

I can't tell if the pieces in the attic picture are the painted or the bright aluminum or stainless(whatever they are) type. If they are not the painted ones I would like those and the side trim. Please give me a total to 80521 and your mailing address so I can get payment to you. Is a postal money order OK with you?Thanks, Brett

the ones in the attic ARE the painted type.. the ones on the truck look like chrome ( or aluminum) ill try to get a quote for ya by this weekend and let ya know... ups, ok? MO will be fine..

bills68panel · 08-02-2006, 02:40 PM

i need the grill will you sell it ? give me a call bill 469-964-9282

bills68panel · 08-02-2006, 02:44 PM

do you have any power steering parts left on this truck gear box and so on?

68 short step · 08-02-2006, 03:14 PM

Quote:

Originally Posted by bills68panel

i need the grill will you sell it ? give me a call bill 469-964-9282

ill give ya a call later on this evening

bean · 08-02-2006, 04:19 PM

what about the inner fender?

68 short step · 08-02-2006, 06:29 PM

go up 6 posts....... yea ill part them

dirtball · 08-02-2006, 07:59 PM

Quote:

Originally Posted by 68 short step

the ones in the attic ARE the painted type.. the ones on the truck look like chrome ( or aluminum) ill try to get a quote for ya by this weekend and let ya know... ups, ok? MO will be fine..

OK, I think I will pass on the grill trim. It looks like the ones on the grill are a little more rough than what I want and I do want the chrome type. So just figure me for the side trim. Thanks

LUV2XCLR8 · 08-02-2006, 09:25 PM

Quote:

Originally Posted by bills68panel

i need the grill will you sell it ?

2nd's, if it gets to me

68 short step · 08-02-2006, 10:47 PM

Quote:

Originally Posted by dirtball

OK, I think I will pass on the grill trim. It looks like the ones on the grill are a little more rough than what I want and I do want the chrome type. So just figure me for the side trim. Thanks

ok, will do.. i have the trim pieces wraped ( looking for a box to ship them in) in plastic foam, so ill find a box asap for ya...and get that quote

68 short step · 08-02-2006, 10:48 PM

Quote:

Originally Posted by LUV2XCLR8

2nd's, if it gets to me

ok if this falls through you'll be up.

**clay68c10** · 08-02-2006, 10:53 PM

What would you want for the front fender edge eyebrow trim pieces?

jsbgump · 08-02-2006, 11:42 PM

Let me know if the hood get to me

68 short step · 08-03-2006, 08:16 AM

Quote:

Originally Posted by clay68c10

What would you want for the front fender edge eyebrow trim pieces?

you wnat the one on the hood too? if not just 10$$ for the both fender ones or 20$ for both fender and hood trim.

LUV2XCLR8 · 08-03-2006, 03:13 PM

Quote:

Originally Posted by 68 short step

ok if this falls through you'll be up.

Uh cool, but how much was it?

I may have missed that

**clay68c10** · 08-03-2006, 04:27 PM

I'll take the fender pieces for $10. PM me about payment and such.

68 short step · 08-03-2006, 11:18 PM

Quote:

Originally Posted by LUV2XCLR8

Uh cool, but how much was it?

I may have missed that

its sold ( 75$)

jsbgump · 08-04-2006, 09:03 AM

How much for the hood if it gets to me?

68 short step · 08-04-2006, 10:23 AM

125$ for he hood.... i think you're up, JSBGUMP

68 short step · 08-06-2006, 11:01 AM

tttttttt

jsbgump · 08-06-2006, 05:47 PM

I'm going to have to pass on the hood. Sorry

deer slayer · 08-06-2006, 08:45 PM

how much for all the a/c

68 short step · 08-06-2006, 09:32 PM

i have the condenser, accumulater,under hood box,under dash stuff, and controls, and little more im forgetting...... the unit under the hood has the hardlines cut tho...... id sell all i have for
70$$$

**clay68c10** · 08-07-2006, 10:45 AM

Paypal sent. Thanks.

08-01-2006, 09:00 PM	#27
dirtball Registered User Join Date: May 2006 Location: Colorado Posts: 412	Re: parting out 68 LWB I can't tell if the pieces in the attic picture are the painted or the bright aluminum or stainless(whatever they are) type. If they are not the painted ones I would like those and the side trim. Please give me a total to 80521 and your mailing address so I can get payment to you. Is a postal money order OK with you?Thanks, Brett

08-02-2006, 02:40 PM	#29
bills68panel Registered User Join Date: Jul 2006 Location: terrell tx. Posts: 67	Re: parting out 68 LWB i need the grill will you sell it ? give me a call bill 469-964-9282

08-02-2006, 02:44 PM	#30
bills68panel Registered User Join Date: Jul 2006 Location: terrell tx. Posts: 67	Re: parting out 68 LWB do you have any power steering parts left on this truck gear box and so on?

08-02-2006, 04:19 PM	#32
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 920	Re: parting out 68 LWB what about the inner fender?

08-02-2006, 06:29 PM	#33
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: parting out 68 LWB go up 6 posts....... yea ill part them

08-02-2006, 10:53 PM	#38
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: parting out 68 LWB What would you want for the front fender edge eyebrow trim pieces? __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-02-2006, 11:42 PM	#39
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: parting out 68 LWB Let me know if the hood get to me __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

08-03-2006, 04:27 PM	#42
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: parting out 68 LWB I'll take the fender pieces for $10. PM me about payment and such. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-04-2006, 09:03 AM	#44
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: parting out 68 LWB How much for the hood if it gets to me? __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

08-04-2006, 10:23 AM	#45
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: parting out 68 LWB 125$ for he hood.... i think you're up, JSBGUMP

08-06-2006, 11:01 AM	#46
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: parting out 68 LWB tttttttt

08-06-2006, 05:47 PM	#47
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: parting out 68 LWB I'm going to have to pass on the hood. Sorry __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

08-06-2006, 08:45 PM	#48
deer slayer Registered User Join Date: Jun 2006 Location: fl Posts: 274	Re: parting out 68 LWB how much for all the a/c

08-06-2006, 09:32 PM	#49
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: parting out 68 LWB i have the condenser, accumulater,under hood box,under dash stuff, and controls, and little more im forgetting...... the unit under the hood has the hardlines cut tho...... id sell all i have for 70$$$

08-07-2006, 10:45 AM	#50
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: parting out 68 LWB Paypal sent. Thanks. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.