new to the board - The 1947 - Present Chevrolet & GMC Truck Message Board Network

travis555 · 07-19-2006, 12:25 PM

new to the board and just wanted to stop in and say hello. can any of you guys tell me where i can find the value of a 77 c20 bonanza? my moms boyfriend has got one that he wants to sell me but neither of us has any idea what its worth.

Eyegore · 07-19-2006, 01:47 PM

well another zonie i see, where in az are you located? i would just check the autotrader and newspaper to see what there going for in the area, or nada could be another source but i'm not sure they go back to 77, but checking what its worth compared to others is a pretty good start, and post some pictures.

Prerunner1982 · 07-19-2006, 02:37 PM

Depends no the shape and mileage, but I would guess $1000-1500 again depends on the shape.. if it is just real clean.. could get $2000-2500.

travis555 · 07-19-2006, 03:42 PM

im in surprise, az. the truck has some minor surface rust and some interior pieces need to be replaced but other than that its in pretty good shape. he has got some extra parts laying around so i think we are gonna settle on $2000. he has already done a little motor work. mild cam, LT headers, true duals, dynomax mufflers, shift kit, edelbrock performer intake, and an edelbrock 600 cfm carb. i want the truck to be a little louder what mufflers do you guys suggest? i was thinking just doin straight pipes but im not sure if it will be too loud. what do you guys think?

Prerunner1982 · 07-19-2006, 05:05 PM

Loud doesnt always equal best performance. You want loud go straight pipes, cant say it would be good for the engine for any length of time.. You want loud you could go with 2 chamber flowmasters, but they arent the best flowing mufflers, contrary to thier name..

travis555 · 07-19-2006, 07:07 PM

yeah ive got flows on my mustang. what mufflers are you guys running? anybody have some pics of their trucks? trying to decide what direction i want to go with the truck. cant decide if i want to raise it and put some ncie 15" rims and some 36" tires or if i wanna go with the street rod look and lower it with some 17's.

Prerunner1982 · 07-19-2006, 07:46 PM

Some of us have flowmasters... alot of the guys have started using Hooker Aero Chambers.. straight through design, not as much incab resonance but still throaty sound at WOT. I have flows on both of my trucks.

As far as raising it, good luck fiting 36" tires on that without spending some BIG $$$$ on lift kit and adding a body lift. Feel free to ask me more about this if you want.......

As far as everyones rides... alot of past and present members have thier pics posted here.. http://67-72chevytrucks.com/vboard/s...ad.php?t=46535
Also, most of us have links in our signatures of pics of our trucks...

Welcome to our addiction...

travis555 · 07-19-2006, 08:04 PM

thanks for the links and the tip on raisin it. looks like its gonna get lowered. now i just gotta decide on what motor and tranny combo to run.

travis555 · 07-19-2006, 08:08 PM

how much should i lower it? i dont want it sittin on the ground but i definetly want it low. in case you havent figured it out i am a truck noobie so expect lots of questions. haha

Prerunner1982 · 07-20-2006, 09:39 AM

Quote:

Originally Posted by travis555

how much should i lower it? i dont want it sittin on the ground but i definetly want it low. in case you havent figured it out i am a truck noobie so expect lots of questions. haha

No worries bud, thats what we are all here for, to ask and to help.. just a suggestion, check out the pics of others trucks and maybe how much they lowered them to get idea.. and you might also start a new thread to get more replies. You ask too many questions in one thread and they tend to get over looked. Just some suggestions..

Slonaker · 07-20-2006, 10:24 AM

The C20 is a 3/4 ton truck, right? If so, you will be a little more limited in your choice of lowering parts and wheels. The suspension is a little different, and the wheels will have more lugs than a 1/2 ton. AFAIK the parts are available, but you might have to pay a little more, and you probably won't have the selection you would if you had a half ton truck.

The other thing to consider is that, assuming it is a 3/4 ton, your truck is a long bed. A lot of people don't like the look of a lowered long bed. Before you make plans to lower it, look at some pics of lowered longbeds and make sure that YOU like the way they look. If you like it, go for it.

If I was looking for a pickup to lower, I would look for a short wheelbase (SWB) 1/2 ton stepside or fleetside. It will be cheaper to lower, easier to find advice on (what product combinations to use to get the look you want, etc.) and look better than a long wheelbase 3/4 ton.

Looks are subjective, though, and your tastes may be different than mine. Some folks might even argue that I have no taste in vehicles, so take my opinions with a grain of salt.

Whatever your choice, ANY nicely done 73-87 is cool!

Slonaker

travis555 · 09-12-2006, 10:21 PM

well i finally got my mustang running again and sold it yesterday and bought the 77. first thing i have planned is to get rid of the original radio and speakers. any suggestions? dont need anything fancy just a cd player and some decent sounding speakers.

86swb · 09-14-2006, 05:08 PM

Lets see some pictures of the Burb. Also welcome to the board from Western Kentucky.

07-19-2006, 12:25 PM	#1
travis555 Registered User Join Date: Jul 2006 Location: arizona Posts: 15	new to the board new to the board and just wanted to stop in and say hello. can any of you guys tell me where i can find the value of a 77 c20 bonanza? my moms boyfriend has got one that he wants to sell me but neither of us has any idea what its worth.

07-19-2006, 01:47 PM	#2
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	Re: new to the board well another zonie i see, where in az are you located? i would just check the autotrader and newspaper to see what there going for in the area, or nada could be another source but i'm not sure they go back to 77, but checking what its worth compared to others is a pretty good start, and post some pictures. __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454

07-19-2006, 02:37 PM	#3
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	Re: new to the board Depends no the shape and mileage, but I would guess $1000-1500 again depends on the shape.. if it is just real clean.. could get $2000-2500. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

07-19-2006, 03:42 PM	#4
travis555 Registered User Join Date: Jul 2006 Location: arizona Posts: 15	Re: new to the board im in surprise, az. the truck has some minor surface rust and some interior pieces need to be replaced but other than that its in pretty good shape. he has got some extra parts laying around so i think we are gonna settle on $2000. he has already done a little motor work. mild cam, LT headers, true duals, dynomax mufflers, shift kit, edelbrock performer intake, and an edelbrock 600 cfm carb. i want the truck to be a little louder what mufflers do you guys suggest? i was thinking just doin straight pipes but im not sure if it will be too loud. what do you guys think?

07-19-2006, 05:05 PM	#5
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	Re: new to the board Loud doesnt always equal best performance. You want loud go straight pipes, cant say it would be good for the engine for any length of time.. You want loud you could go with 2 chamber flowmasters, but they arent the best flowing mufflers, contrary to thier name.. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

07-19-2006, 07:07 PM	#6
travis555 Registered User Join Date: Jul 2006 Location: arizona Posts: 15	Re: new to the board yeah ive got flows on my mustang. what mufflers are you guys running? anybody have some pics of their trucks? trying to decide what direction i want to go with the truck. cant decide if i want to raise it and put some ncie 15" rims and some 36" tires or if i wanna go with the street rod look and lower it with some 17's.

07-19-2006, 07:46 PM	#7
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	Re: new to the board Some of us have flowmasters... alot of the guys have started using Hooker Aero Chambers.. straight through design, not as much incab resonance but still throaty sound at WOT. I have flows on both of my trucks. As far as raising it, good luck fiting 36" tires on that without spending some BIG $$$$ on lift kit and adding a body lift. Feel free to ask me more about this if you want....... As far as everyones rides... alot of past and present members have thier pics posted here.. http://67-72chevytrucks.com/vboard/s...ad.php?t=46535 Also, most of us have links in our signatures of pics of our trucks... Welcome to our addiction... __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call Last edited by Prerunner1982; 07-19-2006 at 07:47 PM.

07-19-2006, 08:04 PM	#8
travis555 Registered User Join Date: Jul 2006 Location: arizona Posts: 15	Re: new to the board thanks for the links and the tip on raisin it. looks like its gonna get lowered. now i just gotta decide on what motor and tranny combo to run.

07-19-2006, 08:08 PM	#9
travis555 Registered User Join Date: Jul 2006 Location: arizona Posts: 15	Re: new to the board how much should i lower it? i dont want it sittin on the ground but i definetly want it low. in case you havent figured it out i am a truck noobie so expect lots of questions. haha

07-20-2006, 10:24 AM	#11
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	Re: new to the board The C20 is a 3/4 ton truck, right? If so, you will be a little more limited in your choice of lowering parts and wheels. The suspension is a little different, and the wheels will have more lugs than a 1/2 ton. AFAIK the parts are available, but you might have to pay a little more, and you probably won't have the selection you would if you had a half ton truck. The other thing to consider is that, assuming it is a 3/4 ton, your truck is a long bed. A lot of people don't like the look of a lowered long bed. Before you make plans to lower it, look at some pics of lowered longbeds and make sure that YOU like the way they look. If you like it, go for it. If I was looking for a pickup to lower, I would look for a short wheelbase (SWB) 1/2 ton stepside or fleetside. It will be cheaper to lower, easier to find advice on (what product combinations to use to get the look you want, etc.) and look better than a long wheelbase 3/4 ton. Looks are subjective, though, and your tastes may be different than mine. Some folks might even argue that I have no taste in vehicles, so take my opinions with a grain of salt. Whatever your choice, ANY nicely done 73-87 is cool! Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado Last edited by Slonaker; 07-20-2006 at 10:25 AM.

09-12-2006, 10:21 PM	#12
travis555 Registered User Join Date: Jul 2006 Location: arizona Posts: 15	Re: new to the board well i finally got my mustang running again and sold it yesterday and bought the 77. first thing i have planned is to get rid of the original radio and speakers. any suggestions? dont need anything fancy just a cd player and some decent sounding speakers. Last edited by travis555; 09-12-2006 at 11:28 PM.

09-14-2006, 05:08 PM	#13
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Re: new to the board Lets see some pictures of the Burb. Also welcome to the board from Western Kentucky. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.