Window Rubber For Single Wall Top??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jkade · 09-15-2006, 04:37 PM

Were can you buy it? LMC sells it for double wall top, will that fit a single also?

LUV2XCLR8 · 09-15-2006, 04:47 PM

Hmmmmm, 2nd time a post on this has come up, I posted pic's in the
last thread, I have been told they are the same, but mine have not
yet been replaced so I can't say one way or the other, someone has
to know the answer to this, and has personally done it, where r u at?

jkade · 09-16-2006, 09:01 AM

Quote:

Originally Posted by LUV2XCLR8

Hmmmmm, 2nd time a post on this has come up, I posted pic's in the
last thread, I have been told they are the same, but mine have not
yet been replaced so I can't say one way or the other, someone has
to know the answer to this, and has personally done it, where r u at?

I hope someone knows. I will look stupid riding around with no back glass.

BobbyK · 09-16-2006, 11:36 PM

I got mine for ALL my (single wall top) windows at GMC Pauls
http://www.gmcpauls.com/blazer1.htm

Good quality,good price and they fit properly.

BobbyK · 09-16-2006, 11:42 PM

Here's a shot of a single walled back hatch(not sure if a double walled one differs).

Basically there's about a 1/4" lip that the rubber gasket slides over.

Then useing the rope trick,set the glass in place.

LUV2XCLR8 · 09-17-2006, 06:49 AM

WoW, $90 vs. $40 for the differance in tops on the side windows,
would never have guessed it be that much different in price, and
I have never seen a single wall hatch, hmm at least I don't think I
have, Bobby will they interchange? that hatch that is, or specific?

BobbyK · 09-17-2006, 09:17 AM

Like I mentioned,I'm not sure if there even is a difference in the hatches(double or sigle walled top)

I'm pretty sure the hatches interchange between the 2 tops,but I have no personnal experience to back that up.

GMC Pauls doesn't list a different rear glass gasket, so I'll assume the glass mounts in the hatch the same way,wether it's a double or single walled design.

LUV2XCLR8 · 09-17-2006, 09:20 AM

Thanks for all the Info Bobby, any idea why a 69 hatch is different from
the 70-72 version? 71swb4x4 says the hatch he has on the rig I'm going
to get from him has a 69 hatch? I thought they were all basically same?

BobbyK · 09-17-2006, 09:26 AM

Well the demensions and basic shape of our tops didn't change for the whole production run of the 1st gen Blazer(besides the single vs double wall design)

I'd say the 69 back hatch will fit.

LUV2XCLR8 · 09-17-2006, 10:23 AM

Quote:

Originally Posted by BobbyK

I'd say the 69 back hatch will fit.

I'm sure it will based on what you said, but why / how is it different? or is it?

obsesive23 · 09-17-2006, 10:59 AM

I have 7 back hatches and they are from various tops, they all are the same.
Hope that helps.

2wdBlazer · 09-17-2006, 11:05 AM

There is no differences in hatches.

jkade · 09-17-2006, 12:26 PM

Quote:

Originally Posted by 2wdBlazer

There is no differences in hatches.

Thanks for the info I will check GMC Pauls's out.

Huck · 09-18-2006, 07:13 AM

The only ruibber that is dramatically different is the door glass to top---that "C" curve mounts into a metal retainer on the single wall and is direct attached to the top on the double. I would only buy rubber-weatherstrip from a supplier that guarantee's it to last. I believe some of our supporting vendors offer a lifetime guarantee. LMC does not and my experience with there rubber has not been good.

09-15-2006, 04:37 PM	#1
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	Window Rubber For Single Wall Top??? Were can you buy it? LMC sells it for double wall top, will that fit a single also?

09-15-2006, 04:47 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Window Rubber For Single Wall Top??? Hmmmmm, 2nd time a post on this has come up, I posted pic's in the last thread, I have been told they are the same, but mine have not yet been replaced so I can't say one way or the other, someone has to know the answer to this, and has personally done it, where r u at? __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-16-2006, 11:36 PM	#4
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	Re: Window Rubber For Single Wall Top??? I got mine for ALL my (single wall top) windows at GMC Pauls http://www.gmcpauls.com/blazer1.htm Good quality,good price and they fit properly. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

09-16-2006, 11:42 PM	#5
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	Re: Window Rubber For Single Wall Top??? Here's a shot of a single walled back hatch(not sure if a double walled one differs). Basically there's about a 1/4" lip that the rubber gasket slides over. Then useing the rope trick,set the glass in place. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

09-17-2006, 06:49 AM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Window Rubber For Single Wall Top??? WoW, $90 vs. $40 for the differance in tops on the side windows, would never have guessed it be that much different in price, and I have never seen a single wall hatch, hmm at least I don't think I have, Bobby will they interchange? that hatch that is, or specific? __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-17-2006, 09:17 AM	#7
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	Re: Window Rubber For Single Wall Top??? Like I mentioned,I'm not sure if there even is a difference in the hatches(double or sigle walled top) I'm pretty sure the hatches interchange between the 2 tops,but I have no personnal experience to back that up. GMC Pauls doesn't list a different rear glass gasket, so I'll assume the glass mounts in the hatch the same way,wether it's a double or single walled design. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE Last edited by BobbyK; 09-17-2006 at 09:18 AM.

09-17-2006, 09:20 AM	#8
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Window Rubber For Single Wall Top??? Thanks for all the Info Bobby, any idea why a 69 hatch is different from the 70-72 version? 71swb4x4 says the hatch he has on the rig I'm going to get from him has a 69 hatch? I thought they were all basically same? __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-17-2006, 09:26 AM	#9
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	Re: Window Rubber For Single Wall Top??? Well the demensions and basic shape of our tops didn't change for the whole production run of the 1st gen Blazer(besides the single vs double wall design) I'd say the 69 back hatch will fit. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE Last edited by BobbyK; 09-17-2006 at 09:26 AM.

09-17-2006, 10:59 AM	#11
obsesive23 Who me? Join Date: Jun 2004 Location: Bothell WA Posts: 640	Re: Window Rubber For Single Wall Top??? I have 7 back hatches and they are from various tops, they all are the same. Hope that helps. __________________ Living the dream 72 2WD Blazer, under going porter built surgery 67 GT Mustang fastback 67 Mustang coupe C/S clone 64 Falcon sprint hardtop

09-17-2006, 11:05 AM	#12
2wdBlazer The Blazer King Join Date: Sep 2000 Location: Valrico, Fl (Tampa) Posts: 1,212	Re: Window Rubber For Single Wall Top??? There is no differences in hatches. __________________ 72 2wd Blazer. Its the superbichinest, megacoolinest, superflowinest.

09-18-2006, 07:13 AM	#14
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Re: Window Rubber For Single Wall Top??? The only ruibber that is dramatically different is the door glass to top---that "C" curve mounts into a metal retainer on the single wall and is direct attached to the top on the double. I would only buy rubber-weatherstrip from a supplier that guarantee's it to last. I believe some of our supporting vendors offer a lifetime guarantee. LMC does not and my experience with there rubber has not been good.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.