The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1973-1987 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-06-2002, 11:40 PM   #1
Fast68Chevy
Account Suspended
 
Fast68Chevy's Avatar
 
Join Date: May 2000
Location: IL
Posts: 0
'74 454 truck stripping down

prices off tp of my head, open to any possible trades, you never know, just try me! theres a little of everything im looking for,

-stock 1974 truck 454 engine, low miles rebuilt with receipts, maybe sell, maybe not, maybe if you have really awesome trading material- maybe something like a decently clean GM truck or 70's nova or camaro rolling body with potential ? or something else ?

1974 BBC truck th400 short tail tranny with bolted output yoke, needs forward range clutch pack discs replaced, reverse not worn out yet, otherwise is fine, $50

complete big 14 bolt FF 10.5" 3.73 rear axle, not posi, in nice shape, still under truck, $225

wheels nice newer deep tread heavy load
highway radial tires 265/85/16" would be awesome tandem axle car trailer tires, $40all and $125all respectively

nice tilting column, no cruise$45, wont be disapointed
nice clean steer wheel$30, wont be disapointed
entire cab wiring harness for th400 and a/c$35

most a/c stuff sold cept for 454 brackets and compressor and HD evaporator core
good hood hinges$20 and goor glasses free and regulators$20 and entire nice shapefront BB 2wd disc suspension$45 and frame$60 and 7+1 56" rear leaf packs$25 and hangers$20 and shackles$20 and 3/4 ton U bolts and plates$20 or package deal,

nice p/s steering gearbox$35, fits 1/2 3/4 1 ton trucks cept for vans,

4 core newer very clean radiator and shroud and top retainer panel and etc related parts needed for this $175 all

more stuff than this on truck, may sell the camper off this truck, its huge, comes all way up to over the windshield and is about 9 foot tall roughly, $75 for that ? has aluminum panel exterior and windows in good shape,
no leaks and has lights inside and inside been replaced with new plywood panels and shelving and stuff, doors been replaced with solid plywood doors and sets of heavy slider latches

thanks.

Last edited by Fast68Chevy; 10-22-2002 at 02:37 AM.
Fast68Chevy is offline   Reply With Quote
Old 10-15-2002, 11:19 PM   #2
hjalbert
cracker
 
hjalbert's Avatar
 
Join Date: Sep 2001
Location: Wilmington, NC
Posts: 1,021
Randy, how much for the tach dash? do all of the instuments work? is it the same that would have been in a 79 suburban? thanks.
__________________
FOUNDING MEMBER OF THE DRUM BRAKE CLUB


Harry John Albert III
located in Phoenix, AZ
1972 GMC JIMMY,
1969 lwb Chevy Frame,
1999 bmw k1200 ltc
1992 Kawasaki concours
1991 bmw k75
1973 cortez motorhome
hjalbert is offline   Reply With Quote
Old 10-15-2002, 11:35 PM   #3
Fast68Chevy
Account Suspended
 
Fast68Chevy's Avatar
 
Join Date: May 2000
Location: IL
Posts: 0
harry, no 74 is oldie style setupo, by 79 they had changed faces of guages and also changed oil to electrical input and other changes. i think the oil changed in 77 and faces in 79
and also filler panel piece at bottom of the bezel at the column changed width too, alot of things changed 73-80 about every year was something changed somewhere somehow including doors change in 77 and grilles every two years, etc.

sorry.

Last edited by Fast68Chevy; 10-15-2002 at 11:37 PM.
Fast68Chevy is offline   Reply With Quote
Old 10-19-2002, 09:51 PM   #4
BIGCHEVYMAN1
Registered User
 
Join Date: Sep 2002
Location: portland tennessee
Posts: 36
motor

what shape is the motor in, and how much for it. i also have that complete p/s setup your looking for. thanks
BIGCHEVYMAN1 is offline   Reply With Quote
Old 10-19-2002, 11:10 PM   #5
Fast68Chevy
Account Suspended
 
Fast68Chevy's Avatar
 
Join Date: May 2000
Location: IL
Posts: 0
Re: motor

Quote:
Originally posted by BIGCHEVYMAN1
what shape is the motor in, and how much for it. i also have that complete p/s setup your looking for. thanks
Big chevy its 1974 454 and was rebuilt in 95 or 96 and is receipted here, and sat after first year of rebuild due to tranny failure on the owner i bought it off of, so it was used for one year traveling country cuz of what he does for living. low miles of course,. needs drivr side exh manifold and two of the bolts drilled tapped out in head for manifold attachment. i think 850 for it would be plenty fair being what the engine is ? stock and with correct Q jet and new HEI was added onto it along with all the other new parts at the same time.


thanks
Fast68Chevy is offline   Reply With Quote
Old 10-20-2002, 12:24 PM   #6
BIGCHEVYMAN1
Registered User
 
Join Date: Sep 2002
Location: portland tennessee
Posts: 36
were are you located? is the motor still in the truck were i can here it run? e-mail cartwrij@bellsouth.net. thanks
BIGCHEVYMAN1 is offline   Reply With Quote
Old 10-20-2002, 09:21 PM   #7
Fast68Chevy
Account Suspended
 
Fast68Chevy's Avatar
 
Join Date: May 2000
Location: IL
Posts: 0
could hear it run again if had exhaust manifold for it, have good semi synthethic oil in it
Fast68Chevy is offline   Reply With Quote
Old 10-20-2002, 11:53 PM   #8
Fast68Chevy
Account Suspended
 
Fast68Chevy's Avatar
 
Join Date: May 2000
Location: IL
Posts: 0
all door panels equipment and all headliner equipment and p/b booster and m/cylinder sold

thanks

Last edited by Fast68Chevy; 10-20-2002 at 11:55 PM.
Fast68Chevy is offline   Reply With Quote
Old 10-21-2002, 10:28 PM   #9
BIGCHEVYMAN1
Registered User
 
Join Date: Sep 2002
Location: portland tennessee
Posts: 36
motor

do you have the manifold? i think i can come up with some oil. if i come to look at it i want to here it run. i don't want to try to ship something like this. its a long trip from nashville.
BIGCHEVYMAN1 is offline   Reply With Quote
Old 10-22-2002, 01:23 AM   #10
Fast68Chevy
Account Suspended
 
Fast68Chevy's Avatar
 
Join Date: May 2000
Location: IL
Posts: 0
manifold i can get,

i meant that i have oil, semi syn oil.,

theres no way in !#@^%$! it can be shipped, no way at all. not from around here unlkess you have an extra few hundred bucks to blast on mail cost

Keith(meathead85) knows what trip is like from Nash to here, he is from here. hehe. Not as far as you may think.

Doesnt matter if i sell engine or not,
i actually like this engine alot had to go through alot of ^%#! to get my hands on it, I really hope to find a full framed small body car for it that can take the torque without becoming a pretzel, hehe


thanks
Randy
Fast68Chevy is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:57 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com