unusual options - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**slomotion** · 10-05-2006, 05:58 PM

Longhorn, you may very well be right about the third member, I don't know. There's a ring of bolts on the forward side of the pig to take out the ring and pinion, and there's a ring of bolts on the back-side to take off the back cover. All I know for sure is, it's a gaummy son of a gun!
The wheel base is 127" which is only 6-7" longer than my '80 short-step. The only reason I refer to it as a short bed is because every other rack body I've compared it to has been longer and this one hasn't been shortened.

Later

10-05-2006, 05:58 PM	#30
slomotion Old Duffer Join Date: Mar 2003 Location: Maine Posts: 1,822	Re: unusual options Longhorn, you may very well be right about the third member, I don't know. There's a ring of bolts on the forward side of the pig to take out the ring and pinion, and there's a ring of bolts on the back-side to take off the back cover. All I know for sure is, it's a gaummy son of a gun! The wheel base is 127" which is only 6-7" longer than my '80 short-step. The only reason I refer to it as a short bed is because every other rack body I've compared it to has been longer and this one hasn't been shortened. Later __________________ '68 Short C20 Flatbed Dually w/ 292 4bbl, Langdon cast headers, and WC T5 trans. '81 G10 Shorty Van "Good judgement comes from experience, and a lot of that comes from bad judgement." Will Rogers "Under promise, then over achieve."



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.