67-72 Suburban/Panel "CHEVROLET" Door/Liftgate Emblem - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71Chev · 10-02-2006, 03:33 PM

We just got 2 in today. You can find the emblem at the top of this page
http://www.gmcpauls.com/Emblems.htm

subtle71 · 10-02-2006, 03:48 PM

Wow! That's a great price for what looks like a high quality emblem! The best part is... no more searching salvage yards for broken flaking emblems.

MrGoodpliers · 10-02-2006, 05:03 PM

My burb is a GMC.... Got that emblem?

Long Roof · 10-02-2006, 07:40 PM

WOOOOOOOWWWWWWWW! That sure is puuurrrty!

Mine could sure use a shinin'

Aaron

Frizzle Fry · 10-03-2006, 02:27 AM

Very Nice!

grebus1 · 10-03-2006, 02:17 PM

GMCPaul, just curious if the emblem has been test fit in a Burb with factory hole locations. Reason I ask is the last time I found one a few years back the pins didn't line up properly, and I ended up returning it.

71Chev · 10-03-2006, 03:31 PM

The studs fit the factory holes perfectly. I just tried it on a 68 panel. They are new reproductions that were just released.

Haven't heard anything on the GMC emblem.

Les

**special-K** · 10-05-2006, 07:19 AM

I have a GMC one I bought since they are rare and I`ve had my eye on a`72 to buy.Prolly never happen,though.I paid a good bit more than that and it should get re-chromed.It makes for an expensive emblem,but as of yet,it`s rare,so....

**zeusflash** · 10-05-2006, 11:13 PM

I just ordered mine...hope I was quick enough to one of these two in stock! My wife is very excited... her Suburban body has been on the rotisserie for about two months and should get its first coat of primer/surfacer this weekend. Hope to have it painted by November 1. Now if I can just find a mint,totally complete rear A/C set up for cheap.....HAHAHAHAHA!

kevlo · 10-06-2006, 02:52 AM

is there any hope for a repop of the hatch handle?

**zeusflash** · 10-12-2006, 11:57 PM

Received my brand new shiny tailgate emblem today. Its beautiful! The $35.00 price is a steal. I cannot vouch for how well it fits the factory holes since someone had welded up the holes in my tailgate. My drilled holes were a little bit off,but looking through the inside access holes my drilled holes are all off the weld marks the same distance and direction.(I gave it my best effort but ended up off about 1/8 inch high....bummer!) It looks to me like these emblems should fit very well.

10-02-2006, 03:33 PM	#1
71Chev Senior Member Join Date: Dec 2000 Location: Indiana Posts: 3,074	67-72 Suburban/Panel "CHEVROLET" Door/Liftgate Emblem We just got 2 in today. You can find the emblem at the top of this page http://www.gmcpauls.com/Emblems.htm __________________ 71 Chevy CST Long Fleet 350/350/3.07 leaf rear.

10-02-2006, 03:48 PM	#2
subtle71 Granddad's Ol' Truck Join Date: Jan 2005 Location: MS Posts: 588	Re: 67-72 Suburban/Panel "CHEVROLET" Door/Liftgate Emblem Wow! That's a great price for what looks like a high quality emblem! The best part is... no more searching salvage yards for broken flaking emblems. __________________ *1971 Chevrolet Custom 10 short step-side* *2005 GMC Sierra SLT 2500HD crew cab 2wd* [I]1971 Chevrolet Custom 10 Deluxe lwb fleet-side

10-02-2006, 05:03 PM	#3
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Re: 67-72 Suburban/Panel "CHEVROLET" Door/Liftgate Emblem My burb is a GMC.... Got that emblem? __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

10-02-2006, 07:40 PM	#4
Long Roof Old School, New Style Join Date: Jun 2005 Location: Monroeville, Ohio Posts: 790	Re: 67-72 Suburban/Panel "CHEVROLET" Door/Liftgate Emblem WOOOOOOOWWWWWWWW! That sure is puuurrrty! Mine could sure use a shinin' Aaron __________________ The Good: - 72 GMC Jimmy 4x4 - 307 cid / 350 th - 70 Chevy Suburban 1/2T 2wd - 454 cid /400 th - 96 Chevy Impala SS - mainly stock - 98 Chevy Tahoe LT 4x4 - all stock The Bad: - 86 Chevy Suburban 1/2T 4x4 - winter beater The Ugly: - 72 Chevy Suburban 1/2T 2wd - parts truck

10-03-2006, 02:27 AM	#5
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: 67-72 Suburban/Panel "CHEVROLET" Door/Liftgate Emblem Very Nice!

10-03-2006, 02:17 PM	#6
grebus1 Registered User Join Date: Feb 2000 Location: Edmonds, WA Posts: 322	Re: 67-72 Suburban/Panel "CHEVROLET" Door/Liftgate Emblem GMCPaul, just curious if the emblem has been test fit in a Burb with factory hole locations. Reason I ask is the last time I found one a few years back the pins didn't line up properly, and I ended up returning it. __________________ '72 Chevy Suburban Custom Deluxe 10, 402/TH400

10-03-2006, 03:31 PM	#7
71Chev Senior Member Join Date: Dec 2000 Location: Indiana Posts: 3,074	Re: 67-72 Suburban/Panel "CHEVROLET" Door/Liftgate Emblem The studs fit the factory holes perfectly. I just tried it on a 68 panel. They are new reproductions that were just released. Haven't heard anything on the GMC emblem. Les __________________ 71 Chevy CST Long Fleet 350/350/3.07 leaf rear. Last edited by 71Chev; 10-03-2006 at 03:41 PM.

10-05-2006, 07:19 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 67-72 Suburban/Panel "CHEVROLET" Door/Liftgate Emblem I have a GMC one I bought since they are rare and I`ve had my eye on a`72 to buy.Prolly never happen,though.I paid a good bit more than that and it should get re-chromed.It makes for an expensive emblem,but as of yet,it`s rare,so.... __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-05-2006, 11:13 PM	#9
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Re: 67-72 Suburban/Panel "CHEVROLET" Door/Liftgate Emblem I just ordered mine...hope I was quick enough to one of these two in stock! My wife is very excited... her Suburban body has been on the rotisserie for about two months and should get its first coat of primer/surfacer this weekend. Hope to have it painted by November 1. Now if I can just find a mint,totally complete rear A/C set up for cheap.....HAHAHAHAHA! __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

10-06-2006, 02:52 AM	#10
kevlo Registered User Join Date: Mar 2006 Location: Abbotsford, B.C. Posts: 12	Re: 67-72 Suburban/Panel "CHEVROLET" Door/Liftgate Emblem is there any hope for a repop of the hatch handle? __________________ '70 Chev K20 'burb ...it ain't easy being green

10-12-2006, 11:57 PM	#11
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Re: 67-72 Suburban/Panel "CHEVROLET" Door/Liftgate Emblem Received my brand new shiny tailgate emblem today. Its beautiful! The $35.00 price is a steal. I cannot vouch for how well it fits the factory holes since someone had welded up the holes in my tailgate. My drilled holes were a little bit off,but looking through the inside access holes my drilled holes are all off the weld marks the same distance and direction.(I gave it my best effort but ended up off about 1/8 inch high....bummer!) It looks to me like these emblems should fit very well. __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.