Thanks to all forum members! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bob D · 10-16-2006, 11:23 PM

Just posting to say thanks to all the forum members for all the great info I have learned off this forum

Sunday I was able to put my finished cab back on the frame single-handedly, bringing me a little closer to having a complete truck again some day.

Bob

p.s. I know....this thread is useless without pics

powell72 · 10-16-2006, 11:33 PM

Congrats, you're really cruisin'. Didn't you end up with quite a bit of rust repair to do in the cab or am I thinking of someone else?

chevy_fatman · 10-16-2006, 11:40 PM

Looking good man!

cheyenne10 · 10-16-2006, 11:49 PM

Looks very nice and done right. Tell us what type of floor paint/treatment you did. I have seen plenty of shiney paint ones but no-one ever sees them and this is moisture prone area.

Brad · 10-16-2006, 11:53 PM

Looking good! I cringed when I first saw your pics because I broke my windshield loading the cab the same way.

I agree, this is such a great site with alot of really good people and great tech tips!

Bob D · 10-17-2006, 12:01 AM

Quote:

Originally Posted by powell72

Congrats, you're really cruisin'. Didn't you end up with quite a bit of rust repair to do in the cab or am I thinking of someone else?

Yes, that could be me. Replaced 3 cab mounts, both corners,inner/outer rockers,lower pillars front and rear, kick panels, front and rear floorpatches, and the inner panel over the windshield. Not professional quality work, but good enough for me.

Bob

Bob D · 10-17-2006, 12:04 AM

Quote:

Originally Posted by cheyenne10

Looks very nice and done right. Tell us what type of floor paint/treatment you did. I have seen plenty of shiney paint ones but no-one ever sees them and this is moisture prone area.

I primed the floor with etching primer and then 2 coats of ZeroRust.

Bob

Aarons72s · 10-17-2006, 12:09 AM

His floor looks like he used spray on bed liner, the stuff in the spray bomb. That is what I used in my orange and white. Correct me if I am wrong.
Oh, and by the way, Lookin sharp. Great job!
Aaron

krue · 10-17-2006, 12:14 AM

It looks great.

watahyahknow · 10-17-2006, 08:08 AM

nice trick with the chains inside the cab
that must be one of the biggest enginehoists i've ever seen .

**Palf70Step** · 10-17-2006, 08:11 AM

Looks good! You did a very nice job.

qksilver · 10-17-2006, 08:19 AM

looks like all that work is paying off, it will be a sweet ride

**Yukon Jack** · 10-17-2006, 10:24 AM

Great way to do the cab. I do most of my work alone so always good to see the different creative way to do those jobs that normally require a helper.

Bob D · 10-17-2006, 03:42 PM

Quote:

Originally Posted by watahyahknow

nice trick with the chains inside the cab
that must be one of the biggest enginehoists i've ever seen .

The boom extends out 1 more notch even with the outriggers. 2 ton max weight, and it doesent roll to well in the yard.

Bob

watahyahknow · 10-17-2006, 06:47 PM

i had rented one over here in the netherlands , it was a foldable 2 metric ton and i think it was half the size and didnt had the pull out legs .
i had to load it in at the rental fold it out to take the engine out of a donor car and into a trailer then fold the lift and put it in the trailer again then drive to the storage space i rented take the lift out again to move the engine .......etc .
i assembled disasembled and loaded the dahm thing bout 5 times including the pickup and delivery back at the place i had rented it , and i had to do it again when it was time to mount the engine in the new car if it was the size youres is i probably couldnt walk straight anymore for a week .
i now have a garage of my own to work in and i do consider to build the type you have with the longer stretch to work on the cab and engine .
if i have to wresle with the cab on my not so smooth floor i need to be sure the crane with cab will not tip over

1Ton · 10-17-2006, 06:59 PM

Looks great. Keep up the good work.

**SactoJim** · 10-17-2006, 07:57 PM

HEY.....copy cat!

st1 · 10-17-2006, 10:20 PM

I have been away from the site but I have seen nothing has changed. Still the same great advise and good pictures. I wish I had a place to work on my trucks. Hopefully when this tour is over I will be some place that I can work on my own stuff again. Good work and keep posting pics so folks like me can live thru folks like you....

Joe67 · 10-17-2006, 10:37 PM

Awesome work on that truck/chassis!

Nice way to move the cab, that is one I haven't seen yet

10-16-2006, 11:23 PM	#1
Bob D Rolled on Paint Club Join Date: Jan 2006 Location: Windham, CT. Posts: 232	Thanks to all forum members! Just posting to say thanks to all the forum members for all the great info I have learned off this forum Sunday I was able to put my finished cab back on the frame single-handedly, bringing me a little closer to having a complete truck again some day. Bob p.s. I know....this thread is useless without pics Attached Images __________________ 1970 GMC 1500 swb fleetside SB 355ci. Smog heads Summit 1102 cam Performer intake and carb. Finally in about 1 piece in the yard.

10-16-2006, 11:33 PM	#2
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: Thanks to all forum members! Congrats, you're really cruisin'. Didn't you end up with quite a bit of rust repair to do in the cab or am I thinking of someone else? __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

10-16-2006, 11:40 PM	#3
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	Re: Thanks to all forum members! Looking good man! __________________ Paul How do you make the invisible, visible?.........You take it away.

10-16-2006, 11:49 PM	#4
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Re: Thanks to all forum members! Looks very nice and done right. Tell us what type of floor paint/treatment you did. I have seen plenty of shiney paint ones but no-one ever sees them and this is moisture prone area. __________________ Bob

10-16-2006, 11:53 PM	#5
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,672	Re: Thanks to all forum members! Looking good! I cringed when I first saw your pics because I broke my windshield loading the cab the same way. I agree, this is such a great site with alot of really good people and great tech tips! __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

10-17-2006, 12:09 AM	#8
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,669	Re: Thanks to all forum members! His floor looks like he used spray on bed liner, the stuff in the spray bomb. That is what I used in my orange and white. Correct me if I am wrong. Oh, and by the way, Lookin sharp. Great job! Aaron

10-17-2006, 12:14 AM	#9
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Thanks to all forum members! It looks great. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

10-17-2006, 08:08 AM	#10
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Thanks to all forum members! nice trick with the chains inside the cab that must be one of the biggest enginehoists i've ever seen . __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

10-17-2006, 08:11 AM	#11
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,470	Re: Thanks to all forum members! Looks good! You did a very nice job. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

10-17-2006, 08:19 AM	#12
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Thanks to all forum members! looks like all that work is paying off, it will be a sweet ride

10-17-2006, 10:24 AM	#13
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,689	Re: Thanks to all forum members! Great way to do the cab. I do most of my work alone so always good to see the different creative way to do those jobs that normally require a helper. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-17-2006, 06:47 PM	#15
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Thanks to all forum members! i had rented one over here in the netherlands , it was a foldable 2 metric ton and i think it was half the size and didnt had the pull out legs . i had to load it in at the rental fold it out to take the engine out of a donor car and into a trailer then fold the lift and put it in the trailer again then drive to the storage space i rented take the lift out again to move the engine .......etc . i assembled disasembled and loaded the dahm thing bout 5 times including the pickup and delivery back at the place i had rented it , and i had to do it again when it was time to mount the engine in the new car if it was the size youres is i probably couldnt walk straight anymore for a week . i now have a garage of my own to work in and i do consider to build the type you have with the longer stretch to work on the cab and engine . if i have to wresle with the cab on my not so smooth floor i need to be sure the crane with cab will not tip over __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

10-17-2006, 06:59 PM	#16
1Ton Registered User Join Date: Nov 2004 Location: Jamestown NY Posts: 731	Re: Thanks to all forum members! Looks great. Keep up the good work. __________________ Support your local search and rescue team.... GET LOST! Originally Posted by DURRTY if some is good more is better too much ought to be enough........

10-17-2006, 07:57 PM	#17
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: Thanks to all forum members! HEY.....copy cat! __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread Last edited by SactoJim; 10-04-2007 at 05:17 PM.

10-17-2006, 10:20 PM	#18
st1 Registered User Join Date: Oct 2005 Location: Jacksonville, NC Posts: 224	Re: Thanks to all forum members! I have been away from the site but I have seen nothing has changed. Still the same great advise and good pictures. I wish I had a place to work on my trucks. Hopefully when this tour is over I will be some place that I can work on my own stuff again. Good work and keep posting pics so folks like me can live thru folks like you.... __________________ stone sends... 78 GMC Stepside (http://67-72chevytrucks.com/vboard/s...d.php?t=243201) 06 Dodge Charger Daytona R/T 05 Suzuki GSX-R 1000



Register or Log In To remove these advertisements.

10-17-2006, 10:37 PM	#19
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Re: Thanks to all forum members! Awesome work on that truck/chassis! Nice way to move the cab, that is one I haven't seen yet __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

Register or Log In To remove these advertisements.