Exhaust ? on 2wd Blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stacerbob · 10-19-2006, 08:24 PM

Anybody got pics?

I need to do something on mine. It has some turbo muffs laying/standing up by the control arms with turndowns. They hit the floor & the CA. Do you guys buy that crossmember & run it through, cut holes in the OE, go under it, outside the frame? I would like them to come out kinda pointing down right behind the rear tire, or go outside the frame & come out right in front of the tire. MAGNAFLOW has a 4" round by 14" long (body) stainless that would free up abunch of room. I will probably mount the exhaust solid but with an insulator & have stainless flex pipes right at the motor. I am also not above having a Y-pipe with a single exhaust but would rather have duals!!

THANKS!!

LUV2XCLR8 · 10-19-2006, 08:49 PM

No pic's on my 2wd, I just got it last weekend, but I did those muffs on
my 4wd and tucked them way up there, you can cut holes in the cross
member, or buy the aftermarket one, if your gonna be low at all it's not
really an option to go under it, they will just hang way to low, and btw,

From West TN

stacerbob · 10-19-2006, 10:20 PM

Is there room to get them snaked through & out the back? I may put 'bags on the back soon. Or just dump them & wear a gas mask!!

LUV2XCLR8 · 10-22-2006, 05:49 PM

Not sure, but I will have my 2wd on the rack at the muffler shop real soon

10-19-2006, 08:24 PM	#1
stacerbob BODY SHOP SUPPLIES INC. Join Date: Oct 2006 Location: NE Arkansas Posts: 198	Exhaust ? on 2wd Blazer Anybody got pics? I need to do something on mine. It has some turbo muffs laying/standing up by the control arms with turndowns. They hit the floor & the CA. Do you guys buy that crossmember & run it through, cut holes in the OE, go under it, outside the frame? I would like them to come out kinda pointing down right behind the rear tire, or go outside the frame & come out right in front of the tire. MAGNAFLOW has a 4" round by 14" long (body) stainless that would free up abunch of room. I will probably mount the exhaust solid but with an insulator & have stainless flex pipes right at the motor. I am also not above having a Y-pipe with a single exhaust but would rather have duals!! THANKS!!

10-19-2006, 08:49 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Exhaust ? on 2wd Blazer No pic's on my 2wd, I just got it last weekend, but I did those muffs on my 4wd and tucked them way up there, you can cut holes in the cross member, or buy the aftermarket one, if your gonna be low at all it's not really an option to go under it, they will just hang way to low, and btw, From West TN __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-19-2006, 10:20 PM	#3
stacerbob BODY SHOP SUPPLIES INC. Join Date: Oct 2006 Location: NE Arkansas Posts: 198	Re: Exhaust ? on 2wd Blazer Is there room to get them snaked through & out the back? I may put 'bags on the back soon. Or just dump them & wear a gas mask!! Last edited by stacerbob; 10-19-2006 at 10:22 PM.

10-22-2006, 05:49 PM	#4
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Exhaust ? on 2wd Blazer Not sure, but I will have my 2wd on the rack at the muffler shop real soon __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.