parts interchangeabilitly question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue85 · 10-25-2006, 01:59 PM

i found a 54 GMC parts truck, will all the parts swap to my 52 GMC?, ive noticed alot of catalouges were some parts are 49-53 and then a different number for 54's

mylow53 · 10-25-2006, 03:09 PM

what parts did you want to swap?

Blue85 · 10-25-2006, 08:23 PM

dunno yet, just looking at some parts trucks, wondering if things will swap over

cajundragger · 10-25-2006, 08:46 PM

some will some wont....best answer available since you dont know what you want to swap over...

mylow53 · 10-25-2006, 09:01 PM

most of the internal parts will i would check however engine and trans match the frount fender probably wont since the grill is diffrent the rear fenders should be the same. i know the chevy more than the gmc but i would suppose the doors to be diffrent window vents and all.. you would probably have some matches but i wouldn't concider them twins
GT

ghetto_superman · 10-25-2006, 09:03 PM

i dunno for sure, but im guessing everything from the cab back would be the same.. except maybe for windows... just my .02

Jebb1978 · 10-26-2006, 05:47 PM

Click this link and ask away, the guys on the oldgmctruck board are well educated on these trucks. There is also a resource right on the message board devoted to this subject. More of the crowd here is into customs, over there is mostly the stocker and preservation guys but both sites have some of either group. See ya over there!

www.oldgmctrucks.com

10-25-2006, 01:59 PM	#1
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,170	parts interchangeabilitly question i found a 54 GMC parts truck, will all the parts swap to my 52 GMC?, ive noticed alot of catalouges were some parts are 49-53 and then a different number for 54's __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

10-25-2006, 03:09 PM	#2
mylow53 Registered User Join Date: Sep 2006 Location: thousand oaks, California Posts: 732	Re: parts interchangeabilitly question what parts did you want to swap? __________________ Greg 1953 chevy 1/2 ton 5 window, chevy 350 330 horse 700r tranz, lowering spindels mustang 2 frount. ford 9", airbags on 4 corners . purchased in 1983 for $325 while in high school http://67-72chevytrucks.com/vboard/s...=215079&page=5

10-25-2006, 08:23 PM	#3
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,170	Re: parts interchangeabilitly question dunno yet, just looking at some parts trucks, wondering if things will swap over __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

10-25-2006, 08:46 PM	#4
cajundragger Registered User Join Date: Aug 2006 Location: louisiana Posts: 1,008	Re: parts interchangeabilitly question some will some wont....best answer available since you dont know what you want to swap over...

10-25-2006, 09:01 PM	#5
mylow53 Registered User Join Date: Sep 2006 Location: thousand oaks, California Posts: 732	Re: parts interchangeabilitly question most of the internal parts will i would check however engine and trans match the frount fender probably wont since the grill is diffrent the rear fenders should be the same. i know the chevy more than the gmc but i would suppose the doors to be diffrent window vents and all.. you would probably have some matches but i wouldn't concider them twins GT __________________ Greg 1953 chevy 1/2 ton 5 window, chevy 350 330 horse 700r tranz, lowering spindels mustang 2 frount. ford 9", airbags on 4 corners . purchased in 1983 for $325 while in high school http://67-72chevytrucks.com/vboard/s...=215079&page=5

10-25-2006, 09:03 PM	#6
ghetto_superman Registered User Join Date: Sep 2006 Location: Omaha, NE Posts: 1,982	Re: parts interchangeabilitly question i dunno for sure, but im guessing everything from the cab back would be the same.. except maybe for windows... just my .02

10-26-2006, 05:47 PM	#7
Jebb1978 Senior Member Join Date: Aug 2005 Location: Mesa,Az Posts: 3,713	Re: parts interchangeabilitly question Click this link and ask away, the guys on the oldgmctruck board are well educated on these trucks. There is also a resource right on the message board devoted to this subject. More of the crowd here is into customs, over there is mostly the stocker and preservation guys but both sites have some of either group. See ya over there! www.oldgmctrucks.com __________________ 1959 GMC project Last edited by Jebb1978; 10-26-2006 at 05:48 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.