Swapping rear ends... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AZgordo · 11-20-2006, 09:30 PM

I've got a 64 c-10 with a 308 and my son has a 68 c-10 with a 410. I want to get him better gas milage since his is a daily driver. Do you think they will just swap cleanly? They are both 6-lug wheels. WHat shuold I measure for this swap?

shortbed70 · 11-20-2006, 10:16 PM

If you have a coil rear and coil rear all you should have to measure is the width of the axles from drum to drum. They should be the same I don't think they changed until 69 but maybe it was 68.

**Chevy Fleetside** · 11-20-2006, 10:22 PM

It will bolt right in... I put a 72 rear in my 65 and it bolts right in...

shortbed70 · 11-20-2006, 10:56 PM

I thought so I put a 68 gmc rear in my 65 and it was 1 in wider total width but gmc was ahead alittle chevy.

AZgordo · 11-21-2006, 08:24 AM

Thanks alot, good to hear it won't take much.

Appreciate the info.
Latz

**raggedjim** · 11-21-2006, 10:08 AM

The only thing you might check is the panhard bar and mounting. Some of the earlier trucks had a mount welded to the passengers side axle tube instead of the stup by the center housing, but I can't remember which years... But since you have both it souldn't be a problem.

I'll try to find a pic.

Rg

**Chevy Fleetside** · 11-21-2006, 10:30 AM

Quote:

Originally Posted by raggedjim

The only thing you might check is the panhard bar and mounting. Some of the earlier trucks had a mount welded to the passengers side axle tube instead of the stup by the center housing, but I can't remember which years... But since you have both it souldn't be a problem.

I'll try to find a pic.

Rg

He is ok with the 64.. I believe it was the 60-62 that had it the other way...

**slepysal** · 11-21-2006, 10:40 AM

so for a '60 rear end swap what would be needed? I have a line on '68 rear end thats been converted to a 5 lug, ez swap?

zenish · 11-21-2006, 08:25 PM

azgordo the 63-64 panard bar is different from the 65-72 panard bar.you could use a track bar kit or maybe modify the 64 bar to work.the perches are in the right place.slepysal the 60 rear is different from 63 up rears.the perches are in a different place.

11-20-2006, 09:30 PM	#1
AZgordo Registered User Join Date: Nov 2006 Location: Mesa, Arziona Posts: 2	Swapping rear ends... I've got a 64 c-10 with a 308 and my son has a 68 c-10 with a 410. I want to get him better gas milage since his is a daily driver. Do you think they will just swap cleanly? They are both 6-lug wheels. WHat shuold I measure for this swap?

11-20-2006, 10:16 PM	#2
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Swapping rear ends... If you have a coil rear and coil rear all you should have to measure is the width of the axles from drum to drum. They should be the same I don't think they changed until 69 but maybe it was 68. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

11-20-2006, 10:22 PM	#3
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,782	Re: Swapping rear ends... It will bolt right in... I put a 72 rear in my 65 and it bolts right in...

11-20-2006, 10:56 PM	#4
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Swapping rear ends... I thought so I put a 68 gmc rear in my 65 and it was 1 in wider total width but gmc was ahead alittle chevy. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

11-21-2006, 08:24 AM	#5
AZgordo Registered User Join Date: Nov 2006 Location: Mesa, Arziona Posts: 2	Re: Swapping rear ends... Thanks alot, good to hear it won't take much. Appreciate the info. Latz

11-21-2006, 10:08 AM	#6
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,478	Re: Swapping rear ends... The only thing you might check is the panhard bar and mounting. Some of the earlier trucks had a mount welded to the passengers side axle tube instead of the stup by the center housing, but I can't remember which years... But since you have both it souldn't be a problem. I'll try to find a pic. Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743 Last edited by raggedjim; 11-21-2006 at 10:09 AM. Reason: I type like cr@p...

11-21-2006, 10:40 AM	#8
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Swapping rear ends... so for a '60 rear end swap what would be needed? I have a line on '68 rear end thats been converted to a 5 lug, ez swap?

11-21-2006, 08:25 PM	#9
zenish Registered User Join Date: Aug 2003 Location: stallings,nc Posts: 401	Re: Swapping rear ends... azgordo the 63-64 panard bar is different from the 65-72 panard bar.you could use a track bar kit or maybe modify the 64 bar to work.the perches are in the right place.slepysal the 60 rear is different from 63 up rears.the perches are in a different place. __________________ 1964 c10 short step 1962 econoline van 1989 rs camaro 2006 yamaha vino 125 1975 goldwing



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.