How much lower can i go? lowering help!?! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SeAnScHeVy · 11-02-2002, 05:35 AM

I just installed my 3 inch drop springs in front and 4 inch drop in the back... it sits nice and level but it just isnt low enough. what can i do to get the body to sit closer to the ground??? thanks for any help guys, Sean

crazy longhorn · 11-02-2002, 09:30 AM

A 3" drop spring is really pushin the limits of the front end geometry, & i would reccomend a 2 1/2" spindle + a 2" spring up front as max drop. At the rear, if you have a 4" drop coil, you can add a 1 1/2" block to keep your level stance. You will also need to add a frame notch,& an adjustable panhard bar(track locater), to center the rear end. If you want SLAMMED, best bet is talk with the "bagged guys". Good luck.....crazy AL

11-02-2002, 05:35 AM	#1
SeAnScHeVy Local Punk Join Date: Aug 2002 Location: GiLbErT, Az. Posts: 51	How much lower can i go? lowering help!?! I just installed my 3 inch drop springs in front and 4 inch drop in the back... it sits nice and level but it just isnt low enough. what can i do to get the body to sit closer to the ground??? thanks for any help guys, Sean __________________ SeAn ThE cHeVy GoD

11-02-2002, 09:30 AM	#2
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	A 3" drop spring is really pushin the limits of the front end geometry, & i would reccomend a 2 1/2" spindle + a 2" spring up front as max drop. At the rear, if you have a 4" drop coil, you can add a 1 1/2" block to keep your level stance. You will also need to add a frame notch,& an adjustable panhard bar(track locater), to center the rear end. If you want SLAMMED, best bet is talk with the "bagged guys". Good luck.....crazy AL



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.