Parts off my or for my 72 F/S - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tphsmith · 11-20-2006, 02:21 PM

Daves71K5, I can post pics tonight when I get home from work of the sill plates, thanks

396muncie · 11-20-2006, 03:45 PM

Quote:

Originally Posted by tphsmith

396muncie, is there a diffrence on the widow regulators from 67-72?. the regulator I have is off my 72 but the door was not a 72 door. so thats what I know about the regulator. if you still want to see a picture of it I can post one tonight

Yes, 72 is unique. Since GM changed the door panel design for 72, they had to make the splined piece that the window crank clips onto longer to stick out far enough for the window crank to clip on. 67-71 will bolt up, but won't work. Thanks anyway.

tphsmith · 11-20-2006, 07:16 PM

daves71k5, here are the pics of the sill plates

454_72_4X4 · 11-21-2006, 01:41 AM

Quote:

Originally Posted by tphsmith

396muncie, is there a diffrence on the widow regulators from 67-72?. the regulator I have is off my 72 but the door was not a 72 door. so thats what I know about the regulator. if you still want to see a picture of it I can post one tonight

Yea, the 72 regulator is a unique animal.
It has more "stickout" on the shaft that the window crank attaches to because of the plastic door panels design.

LMK when/if the fender seals become available.

Bob Moore · 11-21-2006, 06:22 PM

I'll take the fender seals. PM me with paypal address and total amount.

Thanks - Bob

*67BABYBLUE* · 11-21-2006, 07:49 PM

I would take the rear window rubber brand new for 67/68 small window for $20.00. PM me with amount including shipping. My zip is 46307. It is a business address. Thanks 67BABYBLUE

tphsmith · 11-21-2006, 08:12 PM

67babyblue if daves71k5 passes on the rear window seal you are next in line

tphsmith · 11-21-2006, 08:19 PM

Bob Moore can you give me your zip code for shipping cost?

daves71k5 · 11-22-2006, 12:55 AM

I will take the rear window seal, figure shipping to 83211, also would like to know how much rust is on the tops of the sill plates, can't really tell by the pics.
thanks Dave

tphsmith · 11-22-2006, 01:39 PM

daves71k5 here are closer pics i think

daves71k5 · 11-23-2006, 04:11 AM

My sill plates are in about the same shape so I will pass on them for now. I will take the rear window seal, let me know your address and I will get a money order out to you.
thanks Dave

tphsmith · 11-23-2006, 08:52 AM

Thanks Dave, PMed my address to you

**jaros44sr** · 11-23-2006, 09:29 AM

Put me in line for the door sill plates, their in better shape then mine cause I have none.

OK, I'll take them!!

tphsmith · 11-23-2006, 09:31 AM

daves71k passed on the sill plates, so jaros44 your first up to bat

72GMCburban · 11-23-2006, 10:29 AM

do u have a pic of the valve covers?

tphsmith · 11-23-2006, 02:49 PM

72GMCburban, here is a pic of the valve covers

tphsmith · 11-24-2006, 10:53 AM

I want to thank everyone who has bought parts and also thank everyone for looking and asking questions

Bob Moore · 11-24-2006, 01:09 PM

Waiting for E-mail address for pay-pal.

Thanks - Bob

11-20-2006, 02:21 PM	#26
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Parts off my or for my 72 F/S Daves71K5, I can post pics tonight when I get home from work of the sill plates, thanks __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

11-20-2006, 07:16 PM	#28
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Parts off my or for my 72 F/S daves71k5, here are the pics of the sill plates Attached Images __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

11-21-2006, 06:22 PM	#30
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: Parts off my or for my 72 F/S I'll take the fender seals. PM me with paypal address and total amount. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

11-21-2006, 07:49 PM	#31
67BABYBLUE Account Suspended Join Date: Apr 2003 Location: Crown Point,IN Posts: 257	Re: Parts off my or for my 72 F/S I would take the rear window rubber brand new for 67/68 small window for $20.00. PM me with amount including shipping. My zip is 46307. It is a business address. Thanks 67BABYBLUE

11-21-2006, 08:12 PM	#32
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Parts off my or for my 72 F/S 67babyblue if daves71k5 passes on the rear window seal you are next in line __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

11-21-2006, 08:19 PM	#33
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Parts off my or for my 72 F/S Bob Moore can you give me your zip code for shipping cost? __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

11-22-2006, 12:55 AM	#34
daves71k5 Registered User Join Date: Jan 2002 Location: American Falls, Idaho-USA Posts: 318	Re: Parts off my or for my 72 F/S I will take the rear window seal, figure shipping to 83211, also would like to know how much rust is on the tops of the sill plates, can't really tell by the pics. thanks Dave

11-22-2006, 01:39 PM	#35
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Parts off my or for my 72 F/S daves71k5 here are closer pics i think Attached Images __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

11-23-2006, 04:11 AM	#36
daves71k5 Registered User Join Date: Jan 2002 Location: American Falls, Idaho-USA Posts: 318	Re: Parts off my or for my 72 F/S My sill plates are in about the same shape so I will pass on them for now. I will take the rear window seal, let me know your address and I will get a money order out to you. thanks Dave

11-23-2006, 08:52 AM	#37
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Parts off my or for my 72 F/S Thanks Dave, PMed my address to you __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

11-23-2006, 09:29 AM	#38
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,768	Re: Parts off my or for my 72 F/S Put me in line for the door sill plates, their in better shape then mine cause I have none. OK, I'll take them!! __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 11-23-2006 at 03:46 PM.

11-23-2006, 09:31 AM	#39
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Parts off my or for my 72 F/S daves71k passed on the sill plates, so jaros44 your first up to bat __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

11-23-2006, 10:29 AM	#40
72GMCburban Registered User Join Date: Oct 2006 Location: Fort Worth Posts: 306	Re: Parts off my or for my 72 F/S do u have a pic of the valve covers? __________________ --Mike http://rides.webshots.com/album/551997543JkYiXF

11-23-2006, 02:49 PM	#41
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Parts off my or for my 72 F/S 72GMCburban, here is a pic of the valve covers Attached Images __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

11-24-2006, 10:53 AM	#42
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Parts off my or for my 72 F/S I want to thank everyone who has bought parts and also thank everyone for looking and asking questions __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck



Register or Log In To remove these advertisements.

11-24-2006, 01:09 PM	#43
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: Parts off my or for my 72 F/S Waiting for E-mail address for pay-pal. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

Register or Log In To remove these advertisements.