looking for a schematic - The 1947 - Present Chevrolet & GMC Truck Message Board Network

biglou55 · 11-29-2006, 10:30 AM

I am looking for a schematic or a diaghram for the steering column on my 65. the bearing and the plastic it was in is disintegrated. the p.o. had the horn wire and taped to the outside of the column. I have posted this on the other sites also. I would appreciate any help with this matter. If any body has a repair manual that they would like to sell please let me know. ThANKS Lou. H.

*LILRED66* · 11-30-2006, 01:43 AM

I suggest the following manuals for addressing about any question you will have concerning '60-'66 Chevy trucks:

1960 Chevrolet Truck Shop Manual (for '60-'62 Chevy trucks)
1963 Chevrolet Truck Shop Manual Supplement (for '63-'65 Chevy trucks)
1966 Chevrolet Truck Shop Manual Supplement (for '66 Chevy trucks)

1960-1966 Chevrolet/GMC Truck Factory Assembly Instruction Manual

Each of these manuals is invaluable in providing information about your truck. They are available on eBay by doing a search like "1965 Chevy truck" and check the title and description box. They are also available at:

www.bowtiebits.com
www.chevyduty.com
www.lmctruck.com

and many other aftermarket truck suppliers. For the $25.00-$30.00 for each of the manuals, you will save ten times that in time and money searching for the information. I also find these manuals quite informative about factory specs. and original equipment availability.

Any and all questions can be answered by someone on this or other Chevy Truck forum sites, however with these manuals you will be able to respond to some of the posts, as well. Good luck with your search.

biglou55 · 11-30-2006, 02:44 PM

lilred 66 I took your advice and ordered some manuals from chevyduty. Why mess around. I have a 65 C50 wrecker. The manuals will cover the basics-292 six-cabs are the same-mostly all the wiring.I think it will be worth the money. Thanks Lou. H.

laidout · 12-06-2006, 10:26 AM

this might help out

biglou55 · 12-06-2006, 02:43 PM

laidout is that the diagram from a 60-66 book. If it is I have bought the wrong part . The part #s dont match.

laidout · 12-06-2006, 04:03 PM

ya i bought it yesterday at classic auto parts in okc

if you need any pics or #s let me know

biglou55 · 12-06-2006, 04:08 PM

What is the # of the top steering column bearing with the green horn wire. The pic you sent me was blurry and side ways Thanks Lou. H.

laidout · 12-07-2006, 02:34 AM

5671988

11-29-2006, 10:30 AM	#1
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	looking for a schematic I am looking for a schematic or a diaghram for the steering column on my 65. the bearing and the plastic it was in is disintegrated. the p.o. had the horn wire and taped to the outside of the column. I have posted this on the other sites also. I would appreciate any help with this matter. If any body has a repair manual that they would like to sell please let me know. ThANKS Lou. H. __________________ Certifiably crazy person

11-30-2006, 01:43 AM	#2
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: looking for a schematic I suggest the following manuals for addressing about any question you will have concerning '60-'66 Chevy trucks: 1960 Chevrolet Truck Shop Manual (for '60-'62 Chevy trucks) 1963 Chevrolet Truck Shop Manual Supplement (for '63-'65 Chevy trucks) 1966 Chevrolet Truck Shop Manual Supplement (for '66 Chevy trucks) 1960-1966 Chevrolet/GMC Truck Factory Assembly Instruction Manual Each of these manuals is invaluable in providing information about your truck. They are available on eBay by doing a search like "1965 Chevy truck" and check the title and description box. They are also available at: www.bowtiebits.com www.chevyduty.com www.lmctruck.com and many other aftermarket truck suppliers. For the $25.00-$30.00 for each of the manuals, you will save ten times that in time and money searching for the information. I also find these manuals quite informative about factory specs. and original equipment availability. Any and all questions can be answered by someone on this or other Chevy Truck forum sites, however with these manuals you will be able to respond to some of the posts, as well. Good luck with your search. Last edited by LILRED66; 11-30-2006 at 01:47 AM.

11-30-2006, 02:44 PM	#3
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	Re: looking for a schematic lilred 66 I took your advice and ordered some manuals from chevyduty. Why mess around. I have a 65 C50 wrecker. The manuals will cover the basics-292 six-cabs are the same-mostly all the wiring.I think it will be worth the money. Thanks Lou. H. __________________ Certifiably crazy person

12-06-2006, 10:26 AM	#4
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	Re: looking for a schematic this might help out Attached Images

12-06-2006, 02:43 PM	#5
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	Re: looking for a schematic laidout is that the diagram from a 60-66 book. If it is I have bought the wrong part . The part #s dont match. __________________ Certifiably crazy person

12-06-2006, 04:03 PM	#6
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	Re: looking for a schematic ya i bought it yesterday at classic auto parts in okc if you need any pics or #s let me know Attached Images

12-06-2006, 04:08 PM	#7
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	Re: looking for a schematic What is the # of the top steering column bearing with the green horn wire. The pic you sent me was blurry and side ways Thanks Lou. H. __________________ Certifiably crazy person

12-07-2006, 02:34 AM	#8
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	Re: looking for a schematic 5671988



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.