The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-04-2007, 10:03 PM   #1
LorcinLS1
Registered User
 
Join Date: Jan 2007
Location: NewOrleans
Posts: 5
Speedo calibration

My speedo is off. At low speeds 40 and under its 5 mph off. when i am above 70 its 10 mph off. the truck is a t-350 3.73 gears with 275/60/15 tire. does anyone know what speedo gears should be in the tailshaft housing.
LorcinLS1 is offline   Reply With Quote
Old 01-05-2007, 10:35 AM   #2
swb85
On a budget like Fred Sanford
 
swb85's Avatar
 
Join Date: Oct 2005
Location: Topeka, KS
Posts: 2,031
Re: Speedo calibration

Here's a good site that'll help you determine which speedo gear you need.
http://novaresource.org/speedo.htm
__________________
'85 Silverado swb: 383 stroker, 10.5:1, vortec heads, 232/238 roller cam, RPM air gap, performer 750 carb, stainless longtubes, 3" duals/super 44's, T56/4.11 383ci build / exterior refresh thread
'98 Camaro z28: 370ci twin turbo 370ci build
'01 Tahoe LT 4x4: 5.3, longtubes/ory, magnaflow duals, custom tune....wife's DD
swb85 is offline   Reply With Quote
Old 01-05-2007, 10:47 PM   #3
joeymarkgraf
Registered User
 
joeymarkgraf's Avatar
 
Join Date: Dec 2006
Location: Corvallis, OR
Posts: 47
Re: Speedo calibration

Does anyone know if pulling out the shaft and greasing it works? I've heard that, but I'm skeptical...
joeymarkgraf is offline   Reply With Quote
Old 01-05-2007, 10:55 PM   #4
msgross
Registered User
 
msgross's Avatar
 
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
Re: Speedo calibration

carry a GPS..the only ticket that I have ever had was due to my speedometer being off because of my larger tires on an S-10....the excuse didn't work!
msgross is offline   Reply With Quote
Old 01-11-2007, 12:35 AM   #5
jimfulco
Registered User
 
Join Date: May 2003
Location: Shreveport LA
Posts: 3,170
Re: Speedo calibration

Quote:
Originally Posted by joeymarkgraf View Post
Does anyone know if pulling out the shaft and greasing it works? I've heard that, but I'm skeptical...
The short answer is no. It might help if your speedo needle wiggles, though.
jimfulco is offline   Reply With Quote
Old 01-11-2007, 12:46 AM   #6
poncho_villa
Registered User
 
poncho_villa's Avatar
 
Join Date: Feb 2005
Location: B.C.
Posts: 457
Re: Speedo calibration

Quote:
Originally Posted by joeymarkgraf View Post
Does anyone know if pulling out the shaft and greasing it works? I've heard that, but I'm skeptical...
The wife says it works but I too am sceptical.:hit2:
poncho_villa is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:39 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com