sheetmetal cleanup sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nu2-72 · 01-13-2007, 02:08 PM

I am going to begin selling off my parts a little at a time. Starting with larger items first to make the most room around the shop.
I will post the pics and then come back and edit for prices.

Top pics with the orange top fender. This is a very nice fender with a small dent in pic two.
Second fender is the same with a pic of the dent as well.

No shipping.
$40.00 either one.

nu2-72 · 01-13-2007, 02:14 PM

Two more fenders.
RH side has the normal battery damage. $20.00
Last fender is good. $40.00
These may need some minor dolly work at the places shown but the only rust has been shown at the RH fender.
Two hoods, $25.00 either one. Surface rust only.

nu2-72 · 01-13-2007, 02:26 PM

The trailer is one that I built. It has a 7' X 10' steel floor, "C" channel frame,
2" ball setup, 1975 3/4 ton axle with springs and shocks, recessed flush lights and 8' ramps hidden underneath. The jack is swivel and removable. The axle has had the pumpkin removed and the axles chopped. The center was replaced with tube, welded 360 and the vent replaced. Axle is full of lube and this trailer has served me for 8 or so years trouble free. I have hauled wood, 4-wheelers, truck parts, appliances and small garden tractors with no problems. The floor was covered with Toyota Orange, sand was broomed into the wet paint and then coated again for a very nice traction surface.
$750.00 asking price. I never did title this but can very easily.

LUV2XCLR8 · 01-13-2007, 02:38 PM

Nice trailer, wish I had the extra cash laying around

pkj · 01-13-2007, 05:18 PM

whats that nasty looking white stuff? man i havent seen that for a lot of years, and sure dont miss it.

Huskerboy2 · 01-13-2007, 06:05 PM

Nice work on that trailer.

nu2-72 · 01-13-2007, 08:13 PM

The frame rails on a 3/4 ton pickup are 32 inches. By swaping the original brakets and springs left to right creates a wider frame and much more stability without changing anything else. The axle pads are in the original locations, shocks are too. Just had to make custom upper mounts. With the amount of leaves on this trailer, I have no problem loading it down and the shocks help tame the ride. Never even know it is back there. Drove it to Dallas one day for a bed from a board member. Down and back in 22 hours. Kept touching the brakes at night to make sure that I had not lost it.

01-13-2007, 02:08 PM	#1
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	sheetmetal cleanup sale I am going to begin selling off my parts a little at a time. Starting with larger items first to make the most room around the shop. I will post the pics and then come back and edit for prices. Top pics with the orange top fender. This is a very nice fender with a small dent in pic two. Second fender is the same with a pic of the dent as well. No shipping. $40.00 either one. Attached Images __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide Last edited by nu2-72; 01-13-2007 at 02:11 PM. Reason: add pricing

01-13-2007, 02:14 PM	#2
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Re: sheetmetal cleanup sale Two more fenders. RH side has the normal battery damage. $20.00 Last fender is good. $40.00 These may need some minor dolly work at the places shown but the only rust has been shown at the RH fender. Two hoods, $25.00 either one. Surface rust only. Attached Images __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide Last edited by nu2-72; 01-13-2007 at 02:16 PM.

01-13-2007, 02:26 PM	#3
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Re: sheetmetal cleanup sale The trailer is one that I built. It has a 7' X 10' steel floor, "C" channel frame, 2" ball setup, 1975 3/4 ton axle with springs and shocks, recessed flush lights and 8' ramps hidden underneath. The jack is swivel and removable. The axle has had the pumpkin removed and the axles chopped. The center was replaced with tube, welded 360 and the vent replaced. Axle is full of lube and this trailer has served me for 8 or so years trouble free. I have hauled wood, 4-wheelers, truck parts, appliances and small garden tractors with no problems. The floor was covered with Toyota Orange, sand was broomed into the wet paint and then coated again for a very nice traction surface. $750.00 asking price. I never did title this but can very easily. Attached Images __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

01-13-2007, 02:38 PM	#4
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: sheetmetal cleanup sale Nice trailer, wish I had the extra cash laying around __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-13-2007, 05:18 PM	#5
pkj Senior Member Join Date: Jun 2006 Location: waycross ga. Posts: 438	Re: sheetmetal cleanup sale whats that nasty looking white stuff? man i havent seen that for a lot of years, and sure dont miss it.

01-13-2007, 06:05 PM	#6
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: sheetmetal cleanup sale Nice work on that trailer. __________________ '72 Chevy Blazer

01-13-2007, 08:13 PM	#7
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Re: sheetmetal cleanup sale The frame rails on a 3/4 ton pickup are 32 inches. By swaping the original brakets and springs left to right creates a wider frame and much more stability without changing anything else. The axle pads are in the original locations, shocks are too. Just had to make custom upper mounts. With the amount of leaves on this trailer, I have no problem loading it down and the shocks help tame the ride. Never even know it is back there. Drove it to Dallas one day for a bed from a board member. Down and back in 22 hours. Kept touching the brakes at night to make sure that I had not lost it. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.