I feel bad for this guy! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

724x4a/cchevy · 01-27-2007, 10:31 PM

I'd hate to spend that kinda money and then realize its not a factory tach!! Looks like the 73+up camaro tach conversion like i put in my truck. The seller says he doesnt think its factory though so this one's all the bidder's fault. Way overpaid!

http://cgi.ebay.com/ebaymotors/67-72...74948167QQrdZ1

byrd · 01-27-2007, 11:03 PM

Nobody is twisting his arm to buy it, different strokes for different folks

corn · 01-27-2007, 11:59 PM

Ouch!

GREASEMONKEY72 · 01-28-2007, 12:33 AM

sucker

Aarons72s · 01-28-2007, 12:40 AM

No offense but you could almost buy a whole new dash for that. But I do feel somewhat bad for him. My former employer bought one like that for about the same amount because he had never seen one before. Still it looks like a real clean dash.

Rokcrln · 01-28-2007, 01:18 AM

Heck I think I just found out how to fund the next half of Porject Low buck truck build!

Kevin
LFD Inc.

DoobieBrother · 01-28-2007, 01:34 AM

Now that's the cluster I want to replace mine with, Kevin.

IvelDesigns · 01-28-2007, 01:47 AM

that's a mighty fine gauge cluster you have there...

if i wasn't building my own i'd buy it from ya

jimmydean · 01-28-2007, 02:09 AM

Kevin, I bet you'd be willing to part with it for $350+

Some people just don't know how to shop, and others don't know how to sell.

Rokcrln · 01-28-2007, 02:25 AM

Yes I was thrilled when it was given to me. I have the oil hooked up with a "T" fitting that comes from the motor and also feeds my auto meter guage. I like to know just what PSI the motor is really running at but I also like all dash guages to work. I still need to hook up the temp guage. The tach is acting funny but I will be fixing that. The Vac guage is realy an Air PSI guage so this cluster must be out of a C50 or somthing. It will be hooked up with my rear bags going into my truck for towing. I also need to see if the Battery guage works! When I got the cluster it had a tag on it for $200 then changed out the lens and outer shell with new ones that came with the cluster.

Kevin
LFD Inc.

**special-K** · 01-28-2007, 08:54 AM

Classic Industries sells those Camaro tach dashs.I think for less.

70GMCer · 01-28-2007, 09:08 AM

Look how many others bidders there were.....

01-27-2007, 10:31 PM	#1
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	I feel bad for this guy! I'd hate to spend that kinda money and then realize its not a factory tach!! Looks like the 73+up camaro tach conversion like i put in my truck. The seller says he doesnt think its factory though so this one's all the bidder's fault. Way overpaid! http://cgi.ebay.com/ebaymotors/67-72...74948167QQrdZ1 Last edited by 724x4a/cchevy; 01-27-2007 at 10:34 PM.

01-27-2007, 11:59 PM	#3
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: I feel bad for this guy! Ouch!

01-28-2007, 12:33 AM	#4
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: I feel bad for this guy! sucker __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

01-28-2007, 12:40 AM	#5
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,669	Re: I feel bad for this guy! No offense but you could almost buy a whole new dash for that. But I do feel somewhat bad for him. My former employer bought one like that for about the same amount because he had never seen one before. Still it looks like a real clean dash.

01-28-2007, 01:18 AM	#6
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: I feel bad for this guy! Heck I think I just found out how to fund the next half of Porject Low buck truck build! Kevin LFD Inc. Attached Images

01-28-2007, 01:34 AM	#7
DoobieBrother Registered User Join Date: Aug 2006 Location: US Posts: 184	Re: I feel bad for this guy! Now that's the cluster I want to replace mine with, Kevin.

01-28-2007, 01:47 AM	#8
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: I feel bad for this guy! that's a mighty fine gauge cluster you have there... if i wasn't building my own i'd buy it from ya __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007... Last edited by IvelDesigns; 01-28-2007 at 01:48 AM.

01-28-2007, 02:09 AM	#9
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: I feel bad for this guy! Kevin, I bet you'd be willing to part with it for $350+ Some people just don't know how to shop, and others don't know how to sell.

01-28-2007, 02:25 AM	#10
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: I feel bad for this guy! Yes I was thrilled when it was given to me. I have the oil hooked up with a "T" fitting that comes from the motor and also feeds my auto meter guage. I like to know just what PSI the motor is really running at but I also like all dash guages to work. I still need to hook up the temp guage. The tach is acting funny but I will be fixing that. The Vac guage is realy an Air PSI guage so this cluster must be out of a C50 or somthing. It will be hooked up with my rear bags going into my truck for towing. I also need to see if the Battery guage works! When I got the cluster it had a tag on it for $200 then changed out the lens and outer shell with new ones that came with the cluster. Kevin LFD Inc.

01-28-2007, 08:54 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: I feel bad for this guy! Classic Industries sells those Camaro tach dashs.I think for less. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-28-2007, 09:08 AM	#12
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: I feel bad for this guy! Look how many others bidders there were..... __________________ 1997 GMC Sierra Ext 1965 Mustang



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.