The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-30-2007, 05:19 PM   #1
bulky
Bulky
 
bulky's Avatar
 
Join Date: Aug 2004
Location: Rhode Island
Posts: 163
glove box door code questions

Looking for a little help. Below is a picture of my glovebox option tag on a truck I just picked up. I am sure there have been tons of people asking about how to decode the glove box door codes. I can track down most of the codes, but there are a couple I have questions on.

Any ideas for the following three codes?:

1D73
1F44
1ZQ2

Also there are 2 codes listed that have the same description? 1TCD and 1ZCD both have LR78-15C HWY STEEL?? Is it just cut short?

Thanks
B
Attached Images
 
bulky is offline   Reply With Quote
Old 01-30-2007, 06:30 PM   #2
Prerunner1982
Registered User
 
Prerunner1982's Avatar
 
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,904
Re: glove box door code questions

you also have 1xcd, I think those maybe tires?? hwy steel(belted?)

you might also check www.73-87.com

I will take a guess at them though.. just for giggles. Though it would help knowing what type of truck it is.. I realize the VIN is there but dont have time to decipher it.

1D73: Pickup box side rail= possibly the rails that run the length of the bed ontop of each side..??

1F44: Heavy Duty Chassis E(equipement??) =possiblity a group of add on that include the heavy duty shocks and sway bar??

1ZQ2: Operate Convience package= Tilt, cruise, AC, tint .....
__________________
Jon
1982 Chevy Silverado 350/th350.... RETIRED
1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231
....
Oklahoma Roll Call
Prerunner1982 is offline   Reply With Quote
Old 01-30-2007, 08:00 PM   #3
bulky
Bulky
 
bulky's Avatar
 
Join Date: Aug 2004
Location: Rhode Island
Posts: 163
Re: glove box door code questions

Sorry about that....should have put a little more info up there. It is a 1977, 2 WD long bed. Thanks for the info!
bulky is offline   Reply With Quote
Old 01-30-2007, 08:08 PM   #4
KIILew
Active Member
 
Join Date: Mar 2002
Location: Prosser, WA 99350
Posts: 147
Re: glove box door code questions

Bulky:

To supplement Jon’s response to your question:

The original tires on your truck (which were sized in the alpha-numeric method of measurement in the ‘70’s) were LR78-15C passenger highway steel belted radials with whitewall striping. A similar tire in today’s p-metric sizing would likely be a 235/75 R15. The “xcd” coding refers to the optional application of these tires to the front wheels. The “ycd” coding refers to the same application to the rear wheels, and the “zcd” coding refers to the same application to the spare.

These tires carried a weight rating of over 1,900 pounds and, when combined with the heavy duty springs and brakes of the F44 heavy duty chassis package, would give your truck the maximum ½ ton GVWR rating of 6,200 pounds.

The ZQ2 Operating Convenience package you noted consists of power windows and door locks.

Your truck also has the interesting and somewhat rare C92 combination dome and cargo lamp option. This feature consisted of an interior dome lamp which could be swung down to illuminate the cargo box through the rear window. It appeared on the option listing for these trucks for only a few years, as most customers opted for the alternative exterior-mounted cargo lamp, designated option code UF2.

You appear to have a very nicely optioned pickup there!

Ken Lewis
KIILew is offline   Reply With Quote
Old 01-30-2007, 08:12 PM   #5
Prerunner1982
Registered User
 
Prerunner1982's Avatar
 
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,904
Re: glove box door code questions

oh well.. I was atleast right on one of them..for the most part,,
Prerunner1982 is offline   Reply With Quote
Old 01-30-2007, 08:20 PM   #6
bulky
Bulky
 
bulky's Avatar
 
Join Date: Aug 2004
Location: Rhode Island
Posts: 163
Re: glove box door code questions

Would they ever have different wheels up front vs the back??? I can see if it was a dually but a regular fleet side....hmmmm...
bulky is offline   Reply With Quote
Old 01-30-2007, 08:39 PM   #7
84 400
Sb 400 club
 
84 400's Avatar
 
Join Date: Nov 2005
Location: NH / MA
Posts: 2,746
Re: glove box door code questions

I don't think they would. Just does not make sence for Gm to bother. I am still drooling over your truck. It sits pretty high up for a 2wd. Really nice!
__________________
1984 chevy c10, built 400sb,.(SOLD)
77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363
1956 Willys Wagon (327 chevy) Project (Now Buick 225)
1980 Corvette L-48 4 speed
1992 Mustang GT built 5.0 5 speed

1985 C10 LWB Sold
1982 K10 SWB plow truck Parted out
1986 D30 M1028 fire brush truck Parted out
84 400 is offline   Reply With Quote
Old 01-30-2007, 08:46 PM   #8
bulky
Bulky
 
bulky's Avatar
 
Join Date: Aug 2004
Location: Rhode Island
Posts: 163
Re: glove box door code questions

Quote:
Originally Posted by 84 400 View Post
I don't think they would. Just does not make sence for Gm to bother. I am still drooling over your truck. It sits pretty high up for a 2wd. Really nice!
I would expext Ford to do individual codes for each wheel...and probably one for each lug nut....

Thanks for the compliment. I actually havent even had more than 30 minutes with the truck....Picked it up last night and It's sitting down at my buddy's shop till I can bring it home (not enough time in the day. I think I feel a sick day coming on.

As for sitting high, it looks like it has a body lift to clear the 33 x 12.5 on it. Only part that about the lift I'm not crazy about is where the filler panel sits above the front bumper.
bulky is offline   Reply With Quote
Old 01-30-2007, 09:23 PM   #9
Srubydo1986
The Crazy Machanic
 
Srubydo1986's Avatar
 
Join Date: Jan 2007
Location: Nokesville Va
Posts: 1,437
Re: glove box door code questions

well it cool to know that my trucks got on rare thing about it i aalso have that inside dome and back cargo light that cool to know
Srubydo1986 is offline   Reply With Quote
Old 01-30-2007, 10:54 PM   #10
KIILew
Active Member
 
Join Date: Mar 2002
Location: Prosser, WA 99350
Posts: 147
Re: glove box door code questions

Quote:
Originally Posted by Prerunner1982 View Post
oh well.. I was atleast right on one of them..for the most part,,
Oh, you were on the right track with all of it...it's just that I am a data book junkie!

Quote:
Originally Posted by bulky View Post
Would they ever have different wheels up front vs the back??? I can see if it was a dually but a regular fleet side....hmmmm...
Actually, they did allow buyers to have different tread types for the different axles (like allowing mud and snow tires on the rear axle only and highway tread on the front -- hence the allowance for different axle and spare codes on the option sheet). Also, buyers might select heavier load range tires on the back vs the front (particularly on the 3/4 and 1 ton models).
KIILew is offline   Reply With Quote
Old 01-30-2007, 11:26 PM   #11
bigblock73
yeller
 
bigblock73's Avatar
 
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
Re: glove box door code questions

Quote:
Originally Posted by KIILew View Post
Your truck also has the interesting and somewhat rare C92 combination dome and cargo lamp option. This feature consisted of an interior dome lamp which could be swung down to illuminate the cargo box through the rear window. It appeared on the option listing for these trucks for only a few years, as most customers opted for the alternative exterior-mounted cargo lamp, designated option code UF2.
OK Ken, that was news to me...wow. Do you have a picture of this option? I would love to see it if you do.


Or Bulky, can you get a pic next time you are with your truck?

Thanks.
bigblock73 is offline   Reply With Quote
Old 01-30-2007, 11:41 PM   #12
bulky
Bulky
 
bulky's Avatar
 
Join Date: Aug 2004
Location: Rhode Island
Posts: 163
Re: glove box door code questions

No problem on the photo request. I'll be bringing it home this weekend, and plan to grab some more detailed photos all around.

Before I bring it home, I need to go out in the back lot and dig up a fender and some doors (my buddy's shop is attached to his dad's junkyard).

I'll also take some pictures of what he has in the back lot there are 2 or 3 dozen chevy trucks 70's, 80's, 90's. If anyone is looking for parts, I can give you their number (and put in a good word).
bulky is offline   Reply With Quote
Old 01-31-2007, 12:47 AM   #13
84 400
Sb 400 club
 
84 400's Avatar
 
Join Date: Nov 2005
Location: NH / MA
Posts: 2,746
Re: glove box door code questions

Quote:
Originally Posted by bulky View Post
No problem on the photo request. I'll be bringing it home this weekend, and plan to grab some more detailed photos all around.

Before I bring it home, I need to go out in the back lot and dig up a fender and some doors (my buddy's shop is attached to his dad's junkyard).

I'll also take some pictures of what he has in the back lot there are 2 or 3 dozen chevy trucks 70's, 80's, 90's. If anyone is looking for parts, I can give you their number (and put in a good word).


bulky i sent you a PM (Personal message) might have to take you up on the junk yard and a run down to RI would be good for my truck cause it sits alot now. Also i thought that the fire wall looked high up for the motr.....


Also thanks for the news on the tires that was news to me.
__________________
1984 chevy c10, built 400sb,.(SOLD)
77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363
1956 Willys Wagon (327 chevy) Project (Now Buick 225)
1980 Corvette L-48 4 speed
1992 Mustang GT built 5.0 5 speed

1985 C10 LWB Sold
1982 K10 SWB plow truck Parted out
1986 D30 M1028 fire brush truck Parted out

Last edited by 84 400; 01-31-2007 at 12:49 AM.
84 400 is offline   Reply With Quote
Old 02-03-2007, 02:29 PM   #14
bulky
Bulky
 
bulky's Avatar
 
Join Date: Aug 2004
Location: Rhode Island
Posts: 163
Re: glove box door code questions

BigBlock73...picture as requested:
Chrome is a little worn away. But the light is pretty cool, it will fold all the way down and touch the window. As a bonus...it acutally works.
Attached Images
  
bulky is offline   Reply With Quote
Old 02-03-2007, 06:07 PM   #15
84 400
Sb 400 club
 
84 400's Avatar
 
Join Date: Nov 2005
Location: NH / MA
Posts: 2,746
Re: glove box door code questions

thats really cool!
__________________
1984 chevy c10, built 400sb,.(SOLD)
77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363
1956 Willys Wagon (327 chevy) Project (Now Buick 225)
1980 Corvette L-48 4 speed
1992 Mustang GT built 5.0 5 speed

1985 C10 LWB Sold
1982 K10 SWB plow truck Parted out
1986 D30 M1028 fire brush truck Parted out
84 400 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:26 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com