|
|
|
02-07-2007, 05:54 PM
|
#1 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Re: Control Arms
Sorry, I dont have any pics to help you....my 69 has 71-72 lower arms, but the bump stops, & a good portion of the steer stops are cut off to add clearance on a cut coil setup. To answer the ? on what does it do with the 67-70 lower arms......you dont get the full turning radius , as the stop do not let the wheels turn as far as they should. This is not a big issue, as you can modify either the stops on the spindles, or the arms themselves(whichever you are more comfortable with)......
 L
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
