Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
02-23-2007, 09:56 PM | #1 |
Registered User
Join Date: Feb 2007
Location: chandler
Posts: 331
|
alternator wiring issues
. to sart off, im in the middle of swaping a 454ci on my 1970 c10 in place of the old and tired 307ci. the 454 is a 1994 tbi, but i swapped all the out because im gonna go carburated and bought a electric fuel pump since it does not have the hole for the mechanical pump nor the cam. now the issue comes when i wire the alternator. since i cant use the altenator of my original 307 since the 454 is a serpentine, i need to convert the wires coming out of the 454's alternator to properly charge. but for that i need a wiring diagrams. when i bought the engine it did not come with a alternator, so i dont know exactly how the 454's alternator harness is going to look, but ik they are different in some way at least.
TIA!! |
02-23-2007, 10:06 PM | #2 |
Registered User
Join Date: Feb 2002
Location: Vacaville, CA
Posts: 2,745
|
Re: alternator wiring issues
Check out this page:
http://www.chevelles.com/techref/tecref14.html Note if you don't have an idiot light you must use a resistor.
__________________
70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI |
02-24-2007, 12:32 AM | #3 | |
Registered User
Join Date: Feb 2007
Location: chandler
Posts: 331
|
Re: alternator wiring issues
Quote:
|
|
Bookmarks |
|
|