Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
02-16-2007, 09:39 PM | #26 |
Bloo
Join Date: Feb 2001
Location: Barren County Kentucky
Posts: 6,283
|
Re: Whatcha Get Done This Winter on The 4x4?
what about making a box for the ecm and putting it underhood?
|
02-17-2007, 01:42 AM | #27 |
Blazerless
Join Date: Nov 2006
Location: Kelowna, BC, Canada
Posts: 274
|
Re: Whatcha Get Done This Winter on The 4x4?
That would also work, but you would have to be sure that the box was water tight. The late 80's early 90's Corvettes had the ECM under the hood. Maybe a Vette ECM could be gutted and stuffed with TBI "brains". Or if you go TPI, the Vette ECM would work.
__________________
72' K5 Blazer 4x4 350TBI/700R4/NP205 3/4 ton diffs. Daily driver. SOLD 69' Beaumont 388/700R4 11.70@116 77' Bronco, Wife's mall cruiser/poser 4x4. Capable but too pretty to go offroad. |
02-17-2007, 03:43 PM | #28 |
Bloo
Join Date: Feb 2001
Location: Barren County Kentucky
Posts: 6,283
|
Re: Whatcha Get Done This Winter on The 4x4?
i thought i had seen ECMs under hood before, although it is always on some lil blacktop only car... sounds like a time for the welder and some steel to come out
now to just figure out how to run the wiring Last edited by Blue_71; 02-17-2007 at 03:49 PM. |
02-24-2007, 05:57 PM | #29 |
Registered User
Join Date: Oct 2003
Location: Central Vermont
Posts: 8,537
|
Re: Whatcha Get Done This Winter on The 4x4?
After I mounted the ECM, I still wanted to make use of what space was still available for the glove box itself.
Just cut it down and added a plain jane straight backing piece to it. Nothing huge but at least it'll hold paper work and such. |
Bookmarks |
|
|