lift, how hard would it be? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hewlett2002000 · 02-25-2007, 01:53 PM

so how hard would it be to put a, lets say 6" lift on my 66?

desertrat · 02-25-2007, 03:47 PM

Quote:

Originally Posted by hewlett2002000

so how hard would it be to put a, lets say 6" lift on my 66?

Being that it is a 2wd it would be pretty difficult.

hewlett2002000 · 02-25-2007, 05:19 PM

ok how about this? i would love to make my trucka 4x4. i just found a 75 chevy 4x4 LWB . would my body fit on a 75? or would you go another route for that?
thanks,
John

zenish · 02-25-2007, 05:26 PM

you can get lift spindles for the later c10s.,they could be adapted.

desertrat · 02-25-2007, 09:57 PM

Quote:

Originally Posted by hewlett2002000

ok how about this? i would love to make my trucka 4x4. i just found a 75 chevy 4x4 LWB . would my body fit on a 75? or would you go another route for that?
thanks,
John

If you are good at custom work anything is possible. I would scratch the idea of using the '75 frame simply because they are not compatiple but you could swap out all the running gear from the 75 to the 66 but you need to be good with a welder and be prepared to fabricate a few things. This is not an easy project.

02-25-2007, 01:53 PM	#1
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	lift, how hard would it be? so how hard would it be to put a, lets say 6" lift on my 66? __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

02-25-2007, 05:19 PM	#3
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: lift, how hard would it be? ok how about this? i would love to make my trucka 4x4. i just found a 75 chevy 4x4 LWB . would my body fit on a 75? or would you go another route for that? thanks, John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

02-25-2007, 05:26 PM	#4
zenish Registered User Join Date: Aug 2003 Location: stallings,nc Posts: 401	Re: lift, how hard would it be? you can get lift spindles for the later c10s.,they could be adapted. __________________ 1964 c10 short step 1962 econoline van 1989 rs camaro 2006 yamaha vino 125 1975 goldwing



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.