|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-15-2007, 11:43 PM
|
#76 |
|
Got Light Emitting Diode?
Join Date: Apr 2004
Location: Newberg, OR
Posts: 2,485
|
Re: My first build thread LED REVERSE LIGHTS!!
for your convience, more reading.
http://67-72chevytrucks.com/vboard/s...d.php?t=226982
__________________
1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's  (the family car)1993 Cherokee work ride/weekend wheeler |
|
|
|
03-18-2007, 11:17 PM
|
#77 |
|
Self-proclaimed LED man
Join Date: Nov 2003
Location: Harrisburg, Missouri
Posts: 1,021
|
Re: My first build thread LED REVERSE LIGHTS!!
finally finished my brake lights! If you are building your own, be careful not to make my mistake. I accidentally touched 13.3volts un-resisted to 5 led's and burnt out two rows
 
__________________
My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once  Norwood Survivor |
|
|
|
|
03-18-2007, 11:25 PM
|
#78 |
|
Self-proclaimed LED man
Join Date: Nov 2003
Location: Harrisburg, Missouri
Posts: 1,021
|
Re: My first build thread LED REVERSE LIGHTS!!
also, is the reason my turn signals not flashing with the headlights on because of the need for the electronic flasher? They will flash just fine with a bulb, but not my led panels. My led's work and blink just fine untill you turn on the headlights, then they no longer blink.
__________________
My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor |
|
|
|
|
03-30-2007, 06:53 PM
|
#79 |
|
Self-proclaimed LED man
Join Date: Nov 2003
Location: Harrisburg, Missouri
Posts: 1,021
|
Re: My first build thread LED REVERSE LIGHTS!!
This week was spring break here at MU. I didnt get to go on vacation
had to work. Finished one of my rear sidemarker lights!! First step was to figure out a way to make it a plug and play setup like the brake lights i made earlier. I used a piece of computer board and soldered leads onto the copper strip deals. I did three +'s and three -'s  Then i test fit my setup so far.  Final lense setup. I had to remove the yellow backing off the old lense and super glue the two halves together. It makes the lense mount flush too.  A money shot of all my led's so far. 
__________________
My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
