not a 60's guy - can someone date this for me? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Luvlegs · 05-17-2007, 02:12 PM

I usually hang on the 67-72 pages but came across this the other day - any chance you guys could ID it for me? Thanks.

Luvlegs · 05-17-2007, 02:15 PM

couldn't get the pics to go - trying again...

hewlett2002000 · 05-17-2007, 02:58 PM

64-66 .

Luvlegs · 05-17-2007, 03:21 PM

Thanks! Any biggee things I should look to pull? The front fenders/motor are gone.

hewlett2002000 · 05-17-2007, 03:25 PM

you mean for parts? if it were me i would get the column, instrument cluster, all switches in dash, doors(if there good), glove box door, all trim. well hell if it was me id get the whole damn truck. lol
good luck,
John

hewlett2002000 · 05-17-2007, 03:28 PM

ya know, if you wanted to be real nice you could pull that little plate that the heater switch is mounted on and mail it to me?

lol
thanks,
John

Luvlegs · 05-17-2007, 03:37 PM

between the ticks and the snakes, the 20 minute walk to it, the 20 mintue drive to it, not knowing which one is the heater switch, having my back out at the moment and needing a helicopter to get it out, it'll probably go unmolested until sometime this winter! I've been in the place a couple times... get the hibbee jeebies soon after I get in there.. It's not so much the ticks I have been able to get off quickly, it's the arm size snake skins all over the place.... sooner or later, the owners going to show up again.... ehh!

If you can give me a list of what holds what in where (cut down on the tools I have to carry) and the quick way to get stuff off, AND it's not worth like $400.... I'll see what I can do in a week or two....

Tomsriv · 05-17-2007, 03:48 PM

Thats a sad looking truck!
The plate on the glove box is probably worth a little money. The clutch pedal assembly may be worth money as well. I know for muscle cars clutch pedal assemblies are worth their weight in gold. The dash gauges are the low-end idiot light style, but they would be worth money to someone that wants to try and rebuild them without the worry of ruining their own.

forcedinduction · 05-17-2007, 04:02 PM

" can someone date this for me? "

I'd much rather date yer sister!

jkaylor68gmc · 05-17-2007, 04:33 PM

Just save what you can!

hewlett2002000 · 05-17-2007, 04:44 PM

well almost everything on the truck is 1/2" and 9/16" so those for sure. a crescent wrench would be a good thing to have. full socket set. pliers, vice grips. and maybe a hammer, lol. the heater switch is the one to the left of the the radio hole, its on a little plate that just clips in.
good luck,
John

ClassicAutoResto · 05-17-2007, 07:19 PM

If it's an 8 lug, look for hubcaps. I NEED 3/4 TON HUBCAPS!!!!!!!! LOL
Good Luck, Jerry

ClassicAutoResto · 05-17-2007, 07:21 PM

Isn't 65Stepside looking for some bucket seats????????? HMMMM---Send him an e-mail? LOL

hewlett2002000 · 05-17-2007, 07:37 PM

i was looking for some bucket seats but i traded my glide for 2 sets, and 1 set is captains chairs

**slepysal** · 05-17-2007, 07:44 PM

Dont forget a snake bite kit and a rifle

jonathan-m · 05-18-2007, 12:27 AM

forget the truck, I'll take the snakes!!!

(breeding snakes is my life long hobby)

Somebody else can have the ticks though

Luvlegs · 05-18-2007, 10:16 AM

As for my sister - you might want to compare pics first!

IMO The only good snake is dead and wrapped around a pair of boots

I did grab the hood latch and marker lights from the hood as well as the little clips (5) that hold the seal along the front edge of the hood - after seeing that snake, I'm having a hard time convincing myself to go back!

mal68ibu · 05-18-2007, 10:33 AM

Most of the interior stuff on that truck doesn't sell worth a crap on ebay. The doors and hood if rust free are worth big money but also sounds like a big PITA to get out. I'd probably let it rust in peice.

jchav62 · 05-18-2007, 05:51 PM

Looks like that's an original column shift for an automatic. That might be worth something. Is that a short or a long bed. I know a short fleet bed is worth some bucks..If that's possible to get...

hewlett2002000 · 05-18-2007, 06:21 PM

that would be a fun walk. 20 minute walk carrying a truck bed on your back, not including carrying your tools back too. lol

05-17-2007, 02:12 PM	#1
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	not a 60's guy - can someone date this for me? I usually hang on the 67-72 pages but came across this the other day - any chance you guys could ID it for me? Thanks. __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

05-17-2007, 02:15 PM	#2
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: not a 60's guy - can someone date this for me? couldn't get the pics to go - trying again... Attached Images __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

05-17-2007, 02:58 PM	#3
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: not a 60's guy - can someone date this for me? 64-66 . __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

05-17-2007, 03:21 PM	#4
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: not a 60's guy - can someone date this for me? Thanks! Any biggee things I should look to pull? The front fenders/motor are gone. __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

05-17-2007, 03:25 PM	#5
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: not a 60's guy - can someone date this for me? you mean for parts? if it were me i would get the column, instrument cluster, all switches in dash, doors(if there good), glove box door, all trim. well hell if it was me id get the whole damn truck. lol good luck, John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

05-17-2007, 03:28 PM	#6
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: not a 60's guy - can someone date this for me? ya know, if you wanted to be real nice you could pull that little plate that the heater switch is mounted on and mail it to me? lol thanks, John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

05-17-2007, 03:37 PM	#7
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: not a 60's guy - can someone date this for me? between the ticks and the snakes, the 20 minute walk to it, the 20 mintue drive to it, not knowing which one is the heater switch, having my back out at the moment and needing a helicopter to get it out, it'll probably go unmolested until sometime this winter! I've been in the place a couple times... get the hibbee jeebies soon after I get in there.. It's not so much the ticks I have been able to get off quickly, it's the arm size snake skins all over the place.... sooner or later, the owners going to show up again.... ehh! If you can give me a list of what holds what in where (cut down on the tools I have to carry) and the quick way to get stuff off, AND it's not worth like $400.... I'll see what I can do in a week or two.... __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

05-17-2007, 03:48 PM	#8
Tomsriv Registered User Join Date: Apr 2007 Location: Camarillo, CA Posts: 257	Re: not a 60's guy - can someone date this for me? Thats a sad looking truck! The plate on the glove box is probably worth a little money. The clutch pedal assembly may be worth money as well. I know for muscle cars clutch pedal assemblies are worth their weight in gold. The dash gauges are the low-end idiot light style, but they would be worth money to someone that wants to try and rebuild them without the worry of ruining their own.

05-17-2007, 04:02 PM	#9
forcedinduction Registered User Join Date: Aug 2005 Location: Manvel, Texas Posts: 69	Re: not a 60's guy - can someone date this for me? " can someone date this for me? " I'd much rather date yer sister!

05-17-2007, 04:33 PM	#10
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: not a 60's guy - can someone date this for me? Just save what you can!

05-17-2007, 04:44 PM	#11
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: not a 60's guy - can someone date this for me? well almost everything on the truck is 1/2" and 9/16" so those for sure. a crescent wrench would be a good thing to have. full socket set. pliers, vice grips. and maybe a hammer, lol. the heater switch is the one to the left of the the radio hole, its on a little plate that just clips in. good luck, John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

05-17-2007, 07:19 PM	#12
ClassicAutoResto Rust Buster Join Date: Apr 2007 Location: Lebanon, Ky Posts: 558	Re: not a 60's guy - can someone date this for me? If it's an 8 lug, look for hubcaps. I NEED 3/4 TON HUBCAPS!!!!!!!! LOL Good Luck, Jerry

05-17-2007, 07:21 PM	#13
ClassicAutoResto Rust Buster Join Date: Apr 2007 Location: Lebanon, Ky Posts: 558	Re: not a 60's guy - can someone date this for me? Isn't 65Stepside looking for some bucket seats????????? HMMMM---Send him an e-mail? LOL

05-17-2007, 07:37 PM	#14
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: not a 60's guy - can someone date this for me? i was looking for some bucket seats but i traded my glide for 2 sets, and 1 set is captains chairs __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

05-17-2007, 07:44 PM	#15
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: not a 60's guy - can someone date this for me? Dont forget a snake bite kit and a rifle



Register or Log In To remove these advertisements.

05-18-2007, 12:27 AM	#16
jonathan-m Registered User Join Date: Feb 2007 Location: Phoenix Az Posts: 432	Re: not a 60's guy - can someone date this for me? forget the truck, I'll take the snakes!!! (breeding snakes is my life long hobby) Somebody else can have the ticks though

05-18-2007, 10:16 AM	#17
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: not a 60's guy - can someone date this for me? As for my sister - you might want to compare pics first! IMO The only good snake is dead and wrapped around a pair of boots I did grab the hood latch and marker lights from the hood as well as the little clips (5) that hold the seal along the front edge of the hood - after seeing that snake, I'm having a hard time convincing myself to go back! __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

05-18-2007, 10:33 AM	#18
mal68ibu Parts Hunter Join Date: Oct 2006 Location: Sacramento Posts: 247	Re: not a 60's guy - can someone date this for me? Most of the interior stuff on that truck doesn't sell worth a crap on ebay. The doors and hood if rust free are worth big money but also sounds like a big PITA to get out. I'd probably let it rust in peice. __________________ 1968 Chevelle 300 DLX (350 4 speed) 1984 GMC 2500 6.2, 700r4 work truck 1967 GMC Custom (was 6.5 Turbo Diesel powered) My ebay Store: http://stores.ebay.com/The-Musclecar...3aFQ3aSTQQtZkm My website:http://themusclecarshop.net/ 1967 GMC 6.5 TD conversion build:http://67-72chevytrucks.com/vboard/s...d.php?t=290922

05-18-2007, 05:51 PM	#19
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: not a 60's guy - can someone date this for me? Looks like that's an original column shift for an automatic. That might be worth something. Is that a short or a long bed. I know a short fleet bed is worth some bucks..If that's possible to get... __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

05-18-2007, 06:21 PM	#20
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: not a 60's guy - can someone date this for me? that would be a fun walk. 20 minute walk carrying a truck bed on your back, not including carrying your tools back too. lol __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

Register or Log In To remove these advertisements.