Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**PICKMUP** · 05-25-2007, 12:12 AM

Got some nice parts trucks in: Only selling big parts, for now...no shipping.

68 1/2T Chev Sub: Front Clip (no rust)-$500, doors-$100ea, barn doors-$300pr.
Custom made aux fuel tank, main tank, matching rec hitch & dual filler-$200 for all...You pull!

69 1/2T Chev PU: AC Cab complete exc-$800, doors w/new wing seals installed & no speaker holes & no rust-$600pr.

71 3/4T Chev PU: Front clip (no rust)-$500, Cab w/molded lights, good cond-$300, 3:73 dana 60 (coil)-$300, 402 eng rebuilt offered in another thread-$700 or $1,000.

CG · 05-25-2007, 12:28 AM

Whats included with the 68 front clip? Bumper and brackets, wheel wells and core support or just the outer sheet metal?

(I know I shouldn't have taken just one more look)

**PICKMUP** · 05-25-2007, 12:20 PM

68 clip is SOLD...

Clips were complete with no rust through the CS.

dave666693 · 05-25-2007, 01:33 PM

Does that A/C cab come with the doors?

**PICKMUP** · 05-25-2007, 04:29 PM

It can, for a little extra.
The matching doors are perfect+. No rust, no speakers and wing assys have been disassembled and re-riveted with new rubber seals...a lot of labor cost...$600 pr.

dave666693 · 05-25-2007, 04:47 PM

any rust through on the cab? floor, rockers, kick panels. Is it still attached to the truck or is it pulled?

*mattsz* · 05-25-2007, 07:10 PM

Im interested in the grill.

**PICKMUP** · 05-25-2007, 10:38 PM

Dave:
Rocker rust up against the rubber seals/sill plates. I would leave the new dash pad & carpet in the cab to make up for rockers & doors if you want both.
Doors have pin holes on inside edge (not on bottoms) where they made contact with the old door seals...Price lowered to $500pr.

HeavyD · 05-26-2007, 02:37 AM

Is that 71 front clip still for sale? Any dents? Grille looks pretty nice in the pic..

dave666693 · 05-26-2007, 11:14 AM

I have to think about it Frank. (actually, I have to try and convince the wife)
If another buyer is interested don't hesitate on my part. Thanks!

**PICKMUP** · 05-26-2007, 10:46 PM

That 72 clip is solid...no rust. CS, fender tips, inners all exc. The grill is a GM replacement and no dents in grill or sheet metal.

HeavyD · 05-26-2007, 11:11 PM

I am interested. Give me a day or so to figure a way to get it home.

**PICKMUP** · 05-26-2007, 11:32 PM

Heavy D:
I understand you need to figure out shipping, but of course I can't hold it unless it is paid for. After that, I can hold it for a couple weeks, if that will help.
Thanks for understanding.

*mattsz* · 05-27-2007, 09:30 AM

How much for the grill

**PICKMUP** · 05-27-2007, 03:39 PM

Grill is part of the front clip...and only selling big parts...no shipping.

**PICKMUP** · 05-27-2007, 03:53 PM

Cab is pretty exceptional: firewall is solid, no rust through kicks, clean solid cab spts, solid cab corners and clean no rust under the windshield seal.

CG · 05-27-2007, 04:17 PM

Just curious how much would an auto column (non tilt) with all the linkage to the tranny and gear selection and blinker arms set me back? No wheel either. You can pm me the price if you want.

dave666693 · 05-28-2007, 12:23 PM

Cab looks good, but I am going to pass. Thanks

WinDancer · 05-28-2007, 01:37 PM

I am interested in the front coils and spindles for a 69 GMC 1/2 ton 2 wd. How much for all 4- I can come get 'em.
Thanks

05-25-2007, 12:12 AM	#1
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,159	Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA Got some nice parts trucks in: Only selling big parts, for now...no shipping. 68 1/2T Chev Sub: Front Clip (no rust)-$500, doors-$100ea, barn doors-$300pr. Custom made aux fuel tank, main tank, matching rec hitch & dual filler-$200 for all...You pull! 69 1/2T Chev PU: AC Cab complete exc-$800, doors w/new wing seals installed & no speaker holes & no rust-$600pr. 71 3/4T Chev PU: Front clip (no rust)-$500, Cab w/molded lights, good cond-$300, 3:73 dana 60 (coil)-$300, 402 eng rebuilt offered in another thread-$700 or $1,000. Attached Images

05-25-2007, 12:28 AM	#2
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,044	Re: Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA Whats included with the 68 front clip? Bumper and brackets, wheel wells and core support or just the outer sheet metal? (I know I shouldn't have taken just one more look)

05-25-2007, 12:20 PM	#3
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,159	Re: Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA 68 clip is SOLD... Clips were complete with no rust through the CS.

05-25-2007, 01:33 PM	#4
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 901	Re: Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA Does that A/C cab come with the doors?

05-25-2007, 04:29 PM	#5
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,159	Re: Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA It can, for a little extra. The matching doors are perfect+. No rust, no speakers and wing assys have been disassembled and re-riveted with new rubber seals...a lot of labor cost...$600 pr.

05-25-2007, 04:47 PM	#6
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 901	Re: Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA any rust through on the cab? floor, rockers, kick panels. Is it still attached to the truck or is it pulled?

05-25-2007, 07:10 PM	#7
mattsz Account Suspended Join Date: Apr 2007 Location: Henry County KY Posts: 125	Re: Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA Im interested in the grill.

05-25-2007, 10:38 PM	#8
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,159	Re: Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA Dave: Rocker rust up against the rubber seals/sill plates. I would leave the new dash pad & carpet in the cab to make up for rockers & doors if you want both. Doors have pin holes on inside edge (not on bottoms) where they made contact with the old door seals...Price lowered to $500pr.

05-26-2007, 02:37 AM	#9
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Re: Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA Is that 71 front clip still for sale? Any dents? Grille looks pretty nice in the pic.. __________________ "You can take the man out of PA, but you can't take PA out of the man"

05-26-2007, 11:14 AM	#10
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 901	Re: Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA I have to think about it Frank. (actually, I have to try and convince the wife) If another buyer is interested don't hesitate on my part. Thanks!

05-26-2007, 10:46 PM	#11
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,159	Re: Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA That 72 clip is solid...no rust. CS, fender tips, inners all exc. The grill is a GM replacement and no dents in grill or sheet metal.

05-26-2007, 11:11 PM	#12
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Re: Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA I am interested. Give me a day or so to figure a way to get it home. __________________ "You can take the man out of PA, but you can't take PA out of the man"

05-26-2007, 11:32 PM	#13
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,159	Re: Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA Heavy D: I understand you need to figure out shipping, but of course I can't hold it unless it is paid for. After that, I can hold it for a couple weeks, if that will help. Thanks for understanding.

05-27-2007, 09:30 AM	#14
mattsz Account Suspended Join Date: Apr 2007 Location: Henry County KY Posts: 125	Re: Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA How much for the grill

05-27-2007, 03:39 PM	#15
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,159	Re: Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA Grill is part of the front clip...and only selling big parts...no shipping.



Register or Log In To remove these advertisements.

05-27-2007, 03:53 PM	#16
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,159	Re: Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA Cab is pretty exceptional: firewall is solid, no rust through kicks, clean solid cab spts, solid cab corners and clean no rust under the windshield seal. Attached Images

05-27-2007, 04:17 PM	#17
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,044	Re: Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA Just curious how much would an auto column (non tilt) with all the linkage to the tranny and gear selection and blinker arms set me back? No wheel either. You can pm me the price if you want. Last edited by CG; 05-27-2007 at 04:20 PM.

05-28-2007, 12:23 PM	#18
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 901	Re: Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA Cab looks good, but I am going to pass. Thanks

05-28-2007, 01:37 PM	#19
WinDancer The Original HotRod KnifeMaker Join Date: Jan 2007 Location: Tenino, Washington Posts: 811	Re: Parting 68 Sub, 69 PU, & 71 PU only big parts, must be picked up--WA I am interested in the front coils and spindles for a 69 GMC 1/2 ton 2 wd. How much for all 4- I can come get 'em. Thanks __________________ Dave 69 GMC SWB 2WD 454 Turbo 400

Register or Log In To remove these advertisements.