|
05-24-2007, 03:11 PM
|
#1 |
|
Registered User
Join Date: May 2007
Location: arizona
Posts: 5
|
Brake conversion kit
looking for a front drum to disc conversion kit that would work with my 66gmc. I seen a few online, but want to know if anyone has already done one, looking for the power brake option also. thanks in advance.
|
|
|
|
05-24-2007, 05:38 PM
|
#2 |
|
Justified!
Join Date: Apr 2007
Location: Valencia, Ca
Posts: 1,366
|
Re: Brake conversion kit
I just took mine off a '72 GMC truck, and swapped it over.....
Bought some new lines, and a prop valve, and good to go.....
__________________
Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny 
|
|
|
|
|
05-24-2007, 06:30 PM
|
#3 |
|
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
Re: Brake conversion kit
71-87 GM truck.
|
|
|
|
|
05-24-2007, 07:51 PM
|
#4 |
|
Registered User
Join Date: Feb 2007
Location: South West Pennsylvania
Posts: 164
|
Re: Brake conversion kit
__________________
RED RUMBLE 1963 C10 Chevy Truck Owned since 1984 
|
|
|
|
|
05-27-2007, 01:20 PM
|
#5 |
|
Registered User
Join Date: May 2007
Location: arizona
Posts: 5
|
Re: Brake conversion kit
64GMCHorsepower When you say swap, is that from the spindle on out or I think I read in one of the threads it was also the control arms?
Jonboy you saying that I can swap with any 71 -87 GM truck? Thanks 64GMC, Jonboy, and 1restorick. |
|
|
|
|
05-27-2007, 09:04 PM
|
#6 |
|
Justified!
Join Date: Apr 2007
Location: Valencia, Ca
Posts: 1,366
|
Re: Brake conversion kit
I actually swapped the whole front crossmember.....
But you can do just the control arms.
__________________
Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny
|
|
|
|
|
05-27-2007, 09:13 PM
|
#7 |
|
Registered User
Join Date: Jun 2006
Location: Pueblo, Colorado
Posts: 36
|
Re: Brake conversion kit
For my '66, I took the whole shibang from a '78 C-10, The truck had been rear ended, so we just cut the frame off at the cab and took everything forward of that, minus the power steering box, he had already sold that. It all bolted right in. One thing I liked is that the U-bolts that hold the lower control arms on the later crossmember are alot beefier.
__________________
Project: 1966 Chevy C-10 short step-side. 512 Caddy, 10:1 pistons, 76cc heads with oversize valves, Shaft rocker system, MT-10 cam, Edelbrock intake, BBC headers with fabbed Cad flanges. |
|
|
|
|
05-27-2007, 09:51 PM
|
#8 |
|
Active Member
Join Date: Feb 2004
Location: Bartlesville,ok
Posts: 275
|
Re: Brake conversion kit
if you where closer id sell you the complete crossmember disk to disk for a 100.00 im in oklahoma
|
|
|
|
|
05-27-2007, 10:32 PM
|
#9 |
|
Registered User
Join Date: May 2007
Location: arizona
Posts: 5
|
Re: Brake conversion kit
Thanks for the info all, I'll start looking
 
|
|
|
|
|
05-29-2007, 10:39 AM
|
#10 |
|
hillbilly
Join Date: Apr 2007
Location: hampton,tn
Posts: 459
|
Re: Brake conversion kit
i found a boy with a 85 is there anythng different besides the metric but it dont matter if i have every thing right?
__________________
-1962 C-10 |
|
|
|
|
05-29-2007, 05:28 PM
|
#11 |
|
1962 C-10
Join Date: Apr 2005
Location: Las Vegas, New Mexico
Posts: 4,978
|
Re: Brake conversion kit
Are you planning on keeping it 6 lug? If so, you'll need to buy the six lug rotors from one of the catalogs and you'll be able to use some spindles for 71-87. If you plan on converting to five lug, you can use the spindles and rotors. You just have to swap out ball joints, I believe. I helped my brother in law a couple months ago install one of these set ups. Worked real nice on his 67.
__________________
Joseph Chavez  "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4 |
|
|
|
|
05-29-2007, 11:09 PM
|
#12 |
|
hillbilly
Join Date: Apr 2007
Location: hampton,tn
Posts: 459
|
Re: Brake conversion kit
i havent made my mind up if 5 or 6 lug if i stay 6 lug can i just get 6 lug rotors and use the same calipers.
__________________
-1962 C-10 |
|
|
|
|
05-30-2007, 12:04 AM
|
#13 |
|
Registered User
Join Date: Jan 2007
Location: tacoma wa.
Posts: 1,037
|
Re: Brake conversion kit
if your doing 5 lug 73-87truck,73-91 2wd burb'. 6 lug use the 88' up all the info is in tech archive on this site. good luck.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
