as low as i can go with my project truck... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ElkyRacer · 04-20-2007, 11:00 PM

Will you be able to drive the truck as it sits without rubbing the fronts? If you could do me a favor, measure the front and rear fender lips for me? Id like to see how far they sit off of the ground. Thats just the PERFECT stance that Im going for!

Kyle

leftcoast66 · 04-21-2007, 02:25 AM

The truck looks incredible as it sits, but if that's the way you like to drive it(I like mine at same stance while driving) I would finish cuttin cuz it gets realy bad when you sacrifice the inflation on the suspension for looks, cuz I had that problem with mine before I tore it apart to slam it.

Chops_by_Chase · 04-24-2007, 10:16 AM

Quote:

Originally Posted by ElkyRacer

Will you be able to drive the truck as it sits without rubbing the fronts? If you could do me a favor, measure the front and rear fender lips for me? Id like to see how far they sit off of the ground. Thats just the PERFECT stance that Im going for!

Kyle

Right now the truck is pictured at full deflate, so it will rub, I plan on this eventually being the ride height but it will need the drop member, and some fab work in the rear to get it to drive this low. I will get some measurements for you.

LOW DOUGH · 04-24-2007, 04:20 PM

I don't know..... It looks good

ElkyRacer · 04-24-2007, 11:11 PM

Quote:

Originally Posted by Chops_by_Chase

Right now the truck is pictured at full deflate, so it will rub, I plan on this eventually being the ride height but it will need the drop member, and some fab work in the rear to get it to drive this low. I will get some measurements for you.

Thanks I apreciate it! To get it this low it would just need the notch in the rear, what about the front, whats rubbing?

Kyle

Chops_by_Chase · 04-25-2007, 02:47 PM

the tires on my truck are really just to big (31" overeall diameter) so you could get this low with a simple c-notch and spindles and bags, but due to the large tire size that i currently have, i had to raise the bed floor and take the front inner fenders out. I will either get smaller tires, or different wheels and tires all togther.

Kontrol Phreaks · 06-28-2007, 12:26 PM

Man I love how those trucks look when the dropmember is installed and the rear is tucking like a champ.

orange72c10 · 06-30-2007, 10:52 PM

Man either way looks pretty sweet to me.

Mr79C10 · 07-01-2007, 06:51 AM

hella yea!!

*culookn* · 07-02-2007, 08:44 AM

bags and stock floor body drop

low '71 · 07-04-2007, 01:18 AM

looks good keep it as is!!!
where is the panel right behind the hood???

Chops_by_Chase · 07-05-2007, 03:45 PM

Quote:

Originally Posted by low '71

looks good keep it as is!!!
where is the panel right behind the hood???

The panel is in my garage, I think i am going to get rid of the wipers.

04-20-2007, 11:00 PM	#26
ElkyRacer Registered User Join Date: Feb 2007 Location: Texarkana Tx/Ark Posts: 143	Re: as low as i can go with my project truck... Will you be able to drive the truck as it sits without rubbing the fronts? If you could do me a favor, measure the front and rear fender lips for me? Id like to see how far they sit off of the ground. Thats just the PERFECT stance that Im going for! Kyle

04-21-2007, 02:25 AM	#27
leftcoast66 Registered User Join Date: Sep 2006 Location: Covington, WA Posts: 770	Re: as low as i can go with my project truck... The truck looks incredible as it sits, but if that's the way you like to drive it(I like mine at same stance while driving) I would finish cuttin cuz it gets realy bad when you sacrifice the inflation on the suspension for looks, cuz I had that problem with mine before I tore it apart to slam it.

04-24-2007, 04:20 PM	#29
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: as low as i can go with my project truck... I don't know..... It looks good

04-25-2007, 02:47 PM	#31
Chops_by_Chase Registered User Join Date: Nov 2006 Location: Indiana Posts: 98	Re: as low as i can go with my project truck... the tires on my truck are really just to big (31" overeall diameter) so you could get this low with a simple c-notch and spindles and bags, but due to the large tire size that i currently have, i had to raise the bed floor and take the front inner fenders out. I will either get smaller tires, or different wheels and tires all togther.

06-28-2007, 12:26 PM	#32
Kontrol Phreaks Registered User Join Date: Feb 2006 Location: Central Cali Posts: 242	Re: as low as i can go with my project truck... Man I love how those trucks look when the dropmember is installed and the rear is tucking like a champ. __________________ - Clint -

06-30-2007, 10:52 PM	#33
orange72c10 Registered User Join Date: Jun 2007 Location: New York Posts: 153	Re: as low as i can go with my project truck... Man either way looks pretty sweet to me.

07-01-2007, 06:51 AM	#34
Mr79C10 It Is What It Is,,,, Join Date: Aug 2006 Location: The Gun Shine StateFlorida* Posts: 1,765	Re: as low as i can go with my project truck... hella yea!! __________________ 79 C10 Short Box ST8 6 bang'r Lowered w/ 3" Control arms, 2" Lower Coils and 4" shackles and hangers W/ FLIP KIT __--__* 79 C-10 project* .........................__ ..............._____ l __\___ ..............\|_(O)_ \|___(O) ] FAQ INDEX Thread The Kulture My Rat Den

07-02-2007, 08:44 AM	#35
culookn Account Suspended Join Date: Jun 2006 Location: nj Posts: 194	Re: as low as i can go with my project truck... bags and stock floor body drop

07-04-2007, 01:18 AM	#36
low '71 Registered User Join Date: Jun 2007 Location: Manitoba, Canada Posts: 30	Re: as low as i can go with my project truck... looks good keep it as is!!! where is the panel right behind the hood???



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.