Check it out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**swervin ervin** · 12-16-2002, 08:19 PM

Well what do you think? It looks good. Pics don't do it justice.

Here's a few more.

Pic 2

Pic 3

Pic 4

Pic 5

Pic 6

ocbaud · 12-16-2002, 08:22 PM

awesome!

how much did it cost to get covered?

Silveradoshorty · 12-16-2002, 08:38 PM

Very nice!! So your gonna make a bunch and sell em on E Bay right Swerve?? Swerve??

**swervin ervin** · 12-16-2002, 08:38 PM

$250.00 for the whole works, speaker box and console.

I had it covered with vinyl that looks just like leather, I can't remember the name of it. I like it so good, thinking about getting some more of the interior covered with it.

**swervin ervin** · 12-16-2002, 08:43 PM

Quote:

Originally posted by Silveradoshorty
Very nice!! So your gonna make a bunch and sell em on E Bay right Swerve??

That is an idea, but damn it sure is a lot of work. I think I'll pass on the Ebay thing.

LOHRTBT · 12-16-2002, 08:50 PM

beeeyoouuutiiiful!!

Looks awesome!! now lets see some pics of it installed!!

J-Spec C10 · 12-16-2002, 09:10 PM

Looks Really nice! Good workmanship.

bigblock73 · 12-16-2002, 09:25 PM

top notch Mike...mee likey!!!

-Jeff

79BIG10 · 12-17-2002, 12:12 AM

Very nice Mike

Looks great. Can't wait for pics ofit installed.

BigRed · 12-17-2002, 12:29 AM

As everyone else said, looks good and can't wait to see the finished (installed) product! Did you ever find some good cup holders for it?

gchemist · 12-17-2002, 01:54 AM

Nice pics Mike. I like the work you've done. You definately have some talent to cut wood.

Can we get a pic of the shifter without the console in place? I'm curious on its location and how it works.

79BIG10 · 12-17-2002, 04:40 AM

Quote:

Originally posted by gchemist

Can we get a pic of the shifter without the console in place? I'm curious on its location and how it works.

I'd like to see how tall the shifter comes up from the floor.

mckpaul · 12-17-2002, 09:30 AM

Looks great Mike!

**swervin ervin** · 12-17-2002, 06:09 PM

Brandon,

here's a pic of how it looks now.

I found some things I'm going to use for cup holders. They weren't exactly what I wanted, but it was the only thing I could find. They are a wire mesh pencil holder like thing. They look pretty good though.

Mike

**swervin ervin** · 12-17-2002, 07:10 PM

Oh, I forgot to say, as you see, I have one edge of the shifter mounted on the seat frame. I had to do this in order to raise it up so the console would be higher at it's low point. I used a piece of 4x6 and shaped it fit the floor. I fastened it to the tranny tunnel from underneath and then bolted the shifter down. The top mounts on the shifter are fastened to the console too.

love it loud · 12-17-2002, 07:13 PM

how do you get rid of the shifter and clean up the steering column when installing a floor shifter?

low 84 · 12-17-2002, 07:55 PM

Quote:

Originally posted by swervin ervin
Brandon,

here's a pic of how it looks now.

looks familiar mike

i haven't trimmed the base to fit the floor contour yet so mine is 'naked' too. the console looks sweet man!

i have a ?. where is the wire for the backup lights that you tap into to make them work with the floor shifter?

**swervin ervin** · 12-17-2002, 08:01 PM

Yes it does look familar. I see the truck shifter has a raised base to it already.

As far as the wire for the backup lights, to tell you the truth, damned if I remember right now. I found it in the group of wires that came from the column to the fuse panel. I looked in the manual and if I remember correctly, it was a green wire, but, there are more than one green wire. At first I cut the wrong one.

I'll look tomorrow and find out for sure for you. I think it was a medium green not sure.

**swervin ervin** · 12-17-2002, 08:03 PM

Oh, also, I think you can tap into the backup switch at the bottom of the column too. I didn't feel like laying on my back looking under the column so I tied into the wire itself.

low 84 · 12-17-2002, 08:35 PM

thnks mike. the truck shifter has an adjustable base that gives you like 2 or 3 inches of adjustment height wise. since the buckets sit a bit lower than the bench did i have it at the lowest setting which is in perfect reach from the driver seat.

rolson1039 · 12-17-2002, 09:07 PM

as a guy who loves working with wood too, would it be possible that you would want to sell plans for the console?

love it loud · 12-17-2002, 09:09 PM

i believe he has drawings of it on his website..
could somebody please answer my previous question on this thread? seems it kinda got skipped over with all the excitement.. thanks!

**swervin ervin** · 12-17-2002, 09:25 PM

Quote:

Originally posted by love it loud
how do you get rid of the shifter and clean up the steering column when installing a floor shifter?

That is a very good question, and one I believe there is no good answer for. From all I know and have read, they didn't have tilt columns in manual floor shifted trucks, so finding one would be out of the question. The only option I know of is no tilt and use a manual shifter column sleeve. I'm keeping my tilt column, so I was thinking of when I get it painted, have whoever paints it for me, to patch it somehow and paint it. I guess I could cut it off myself and do something, but right now, I think I'll leave it like it is. All I did was remove the shift lever.

love it loud · 12-17-2002, 09:30 PM

makes sense, you could always weld a patch panel in there possibly.. kind of like shaving door handles.. then u also gotta deal with the useless gear indicator remaining on your dash..
I plan on doing this myself in the future so I'm just wonderin what everyone did to clean up the old leftover stuff..

**swervin ervin** · 12-17-2002, 09:31 PM

rolson,

I ain't selling nothing. I give them to you though.

Check this link.

http://www.73-87.com/garage/garage.htm

I have a page on the speaker box and console both. I don't really have plans, but there is plenty of drawings and pics.

BTW, my console was built to sit on the frame of my aftermarket seats. If you have no frame, like Ryan, you will need to design the bottom of the base different. I have a drawing for both style bases. The one for no frame is a rough guesstimate only. I didn't check exact measurements. It would be all that hard to figure out though.

12-16-2002, 08:19 PM	#1
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Check it out Well what do you think? It looks good. Pics don't do it justice. Here's a few more. Pic 2 Pic 3 Pic 4 Pic 5 Pic 6 __________________ Mike 1985 Chevy C-10

12-16-2002, 08:38 PM	#3
Silveradoshorty Registered User Join Date: Sep 2002 Location: Winterpeg Manisnowba, Canada Posts: 60	Very nice!! So your gonna make a bunch and sell em on E Bay right Swerve?? Swerve?? __________________ 1985 Silverado S/W 454 TH400, 4 wheel Disk Brakes, B&M Floor Shifter, 9" rear, lowered 4/6.

12-16-2002, 08:38 PM	#4
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	$250.00 for the whole works, speaker box and console. I had it covered with vinyl that looks just like leather, I can't remember the name of it. I like it so good, thinking about getting some more of the interior covered with it. __________________ Mike 1985 Chevy C-10

12-16-2002, 08:50 PM	#6
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	beeeyoouuutiiiful!! Looks awesome!! now lets see some pics of it installed!! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

12-16-2002, 09:10 PM	#7
J-Spec C10 Whats this wire for?.... Join Date: Dec 2002 Location: Barrie, Ontario, CANADA Posts: 378	Looks Really nice! Good workmanship. __________________ Kyle CANADIAN CONNECTION '82 C10 Resto-Custom--> * 2 1/4" manifold back dual exhaust with Hooker Aerochambers & High Flow Cats Taylor Ignition Wires Centerline 15" Telstars with 32"x10" mudders

12-16-2002, 08:22 PM	#2
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	awesome! how much did it cost to get covered?

12-16-2002, 09:25 PM	#8
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	top notch Mike...mee likey!!! -Jeff

12-17-2002, 12:12 AM	#9
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Very nice Mike Looks great. Can't wait for pics ofit installed. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

12-17-2002, 12:29 AM	#10
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	As everyone else said, looks good and can't wait to see the finished (installed) product! Did you ever find some good cup holders for it? __________________ Scott Shelbourne

12-17-2002, 01:54 AM	#11
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Nice pics Mike. I like the work you've done. You definately have some talent to cut wood. Can we get a pic of the shifter without the console in place? I'm curious on its location and how it works. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

12-17-2002, 09:30 AM	#13
mckpaul Registered User Join Date: Dec 2002 Location: Houston Posts: 300	Looks great Mike! __________________ Paul 1984 Chevy C-10 LWB/305

12-17-2002, 06:09 PM	#14
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Brandon, here's a pic of how it looks now. I found some things I'm going to use for cup holders. They weren't exactly what I wanted, but it was the only thing I could find. They are a wire mesh pencil holder like thing. They look pretty good though. Mike

12-17-2002, 07:10 PM	#15
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Oh, I forgot to say, as you see, I have one edge of the shifter mounted on the seat frame. I had to do this in order to raise it up so the console would be higher at it's low point. I used a piece of 4x6 and shaped it fit the floor. I fastened it to the tranny tunnel from underneath and then bolted the shifter down. The top mounts on the shifter are fastened to the console too. __________________ Mike 1985 Chevy C-10

12-17-2002, 07:13 PM	#16
love it loud Calibration Engineer Join Date: Oct 2002 Location: Windsor, Ontario, Canada Posts: 361	how do you get rid of the shifter and clean up the steering column when installing a floor shifter? __________________ CANADIAN CONNECTION

12-17-2002, 08:01 PM	#18
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Yes it does look familar. I see the truck shifter has a raised base to it already. As far as the wire for the backup lights, to tell you the truth, damned if I remember right now. I found it in the group of wires that came from the column to the fuse panel. I looked in the manual and if I remember correctly, it was a green wire, but, there are more than one green wire. At first I cut the wrong one. I'll look tomorrow and find out for sure for you. I think it was a medium green not sure. __________________ Mike 1985 Chevy C-10



Register or Log In To remove these advertisements.

12-17-2002, 08:03 PM	#19
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Oh, also, I think you can tap into the backup switch at the bottom of the column too. I didn't feel like laying on my back looking under the column so I tied into the wire itself. __________________ Mike 1985 Chevy C-10

12-17-2002, 08:35 PM	#20
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	thnks mike. the truck shifter has an adjustable base that gives you like 2 or 3 inches of adjustment height wise. since the buckets sit a bit lower than the bench did i have it at the lowest setting which is in perfect reach from the driver seat. __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

12-17-2002, 09:07 PM	#21
rolson1039 Registered User Join Date: Oct 2002 Location: NJ Posts: 404	plans as a guy who loves working with wood too, would it be possible that you would want to sell plans for the console?

12-17-2002, 09:09 PM	#22
love it loud Calibration Engineer Join Date: Oct 2002 Location: Windsor, Ontario, Canada Posts: 361	i believe he has drawings of it on his website.. could somebody please answer my previous question on this thread? seems it kinda got skipped over with all the excitement.. thanks! __________________ CANADIAN CONNECTION

12-17-2002, 09:30 PM	#24
love it loud Calibration Engineer Join Date: Oct 2002 Location: Windsor, Ontario, Canada Posts: 361	makes sense, you could always weld a patch panel in there possibly.. kind of like shaving door handles.. then u also gotta deal with the useless gear indicator remaining on your dash.. I plan on doing this myself in the future so I'm just wonderin what everyone did to clean up the old leftover stuff.. __________________ CANADIAN CONNECTION

12-17-2002, 09:31 PM	#25
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	rolson, I ain't selling nothing. I give them to you though. Check this link. http://www.73-87.com/garage/garage.htm I have a page on the speaker box and console both. I don't really have plans, but there is plenty of drawings and pics. BTW, my console was built to sit on the frame of my aftermarket seats. If you have no frame, like Ryan, you will need to design the bottom of the base different. I have a drawing for both style bases. The one for no frame is a rough guesstimate only. I didn't check exact measurements. It would be all that hard to figure out though. __________________ Mike 1985 Chevy C-10

Register or Log In To remove these advertisements.