will this fit my truck? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ocbaud · 08-26-2007, 12:49 AM

http://www.classicparts.com/prodinfo.asp?number=79-507

please tell me it will!

its exactly what i've been looking for, but i'm not sure if it is the right length to fit my frame

**texassquarebodies** · 08-26-2007, 09:44 AM

I don't know if that will fit but, I have another option for ya. Chevy 1 ton trucks have a trans crossmember that do NOT hang below the frame. It has brackets the bolt inside the frame top and bottom. The frame is alot taller, but you can use either the top or bottom brackets. I think it is a total of 5 pieces. I have a 1982 swb that is lower than yours and thats what I going to do. Mine was FREE!!!!!!

Tony Kee
Texas Square Bodies 73-87 junkie

bigblock73 · 08-26-2007, 09:47 AM

Quote:

Originally Posted by texassquarebodies

I don't know if that will fit but, I have another option for ya. Chevy 1 ton trucks have a trans crossmember that do NOT hang below the frame. It has brackets the bolt inside the frame top and bottom. The frame is alot taller, but you can use either the top or bottom brackets. I think it is a total of 5 pieces. I have a 1982 swb that is lower than yours and thats what I going to do. Mine was FREE!!!!!!

Tony Kee
Texas Square Bodies 73-87 junkie

The early 70's trucks had them too...my '73 has the same crossmember you are referring to (but mine is 3 pieces total)...and it is a 1/2 ton, 2WD. They are commonly referred to as "double hump" crossmembers.

ocbaud · 08-26-2007, 11:49 AM

Quote:

Originally Posted by texassquarebodies

I don't know if that will fit but, I have another option for ya. Chevy 1 ton trucks have a trans crossmember that do NOT hang below the frame. It has brackets the bolt inside the frame top and bottom. The frame is alot taller, but you can use either the top or bottom brackets. I think it is a total of 5 pieces. I have a 1982 swb that is lower than yours and thats what I going to do. Mine was FREE!!!!!!

Tony Kee
Texas Square Bodies 73-87 junkie

correct, but i do not have the time to go out to junk yards and search for parts. that is originally what i wanted, and still do. but if i could find a tubular one(probably for cheaper too) i would be all for it. cant argue with the weight reduction.

bigblock73 · 08-26-2007, 12:02 PM

Eric, hate to burst your bubble, but the weight differences between the two are very minimal. Besides, don't you have subs and amps in your ride...there is some additional weight over stock that you could shave.

ocbaud · 08-26-2007, 12:13 PM

Quote:

Originally Posted by bigblock73

Eric, hate to burst your bubble, but the weight differences between the two are very minimal. Besides, don't you have subs and amps in your ride...there is some additional weight over stock that you could shave.

i'm making up for the subs

knightlife · 08-26-2007, 05:30 PM

hey eric...when I come back to Ok to do my RAP, want me to build subs into your truck? Im pretty decent with fiberglassing

liljon285 · 08-26-2007, 06:40 PM

I think some welding shops can make some for you...i would want one to mine has like 12 bolts and they usually rusted in there or hard to reach!

08-26-2007, 12:49 AM	#1
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	will this fit my truck? http://www.classicparts.com/prodinfo.asp?number=79-507 please tell me it will! its exactly what i've been looking for, but i'm not sure if it is the right length to fit my frame

08-26-2007, 09:44 AM	#2
texassquarebodies Truck Nut Join Date: Jun 2007 Location: Wills Point, Texas Posts: 407	Re: will this fit my truck? I don't know if that will fit but, I have another option for ya. Chevy 1 ton trucks have a trans crossmember that do NOT hang below the frame. It has brackets the bolt inside the frame top and bottom. The frame is alot taller, but you can use either the top or bottom brackets. I think it is a total of 5 pieces. I have a 1982 swb that is lower than yours and thats what I going to do. Mine was FREE!!!!!! Tony Kee Texas Square Bodies 73-87 junkie

08-26-2007, 12:02 PM	#5
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: will this fit my truck? Eric, hate to burst your bubble, but the weight differences between the two are very minimal. Besides, don't you have subs and amps in your ride...there is some additional weight over stock that you could shave. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

08-26-2007, 05:30 PM	#7
knightlife Dark Heart Motorsports Join Date: Apr 2007 Location: 29404 DKFX Posts: 683	Re: will this fit my truck? hey eric...when I come back to Ok to do my RAP, want me to build subs into your truck? Im pretty decent with fiberglassing __________________ How Deep Can YOU Bleed..? 1985 Chevy Blazer K5- 6.2 N/A, 400 turbo trans CUCV, 12v converted... a new chapter 2005 GMC Sierra Crew Cab 6.0 powwwaa!!! custom jumpseat install w/ captain seats, Hypertech tuner, MSD Blaster Coils, CB and twin antenna's, all electric interior, touch screen in dash. custom center console, with jump seat replacing original console. 1500 HD!

08-26-2007, 06:40 PM	#8
liljon285 That Guy Join Date: Sep 2005 Location: miami, fl Posts: 327	Re: will this fit my truck? I think some welding shops can make some for you...i would want one to mine has like 12 bolts and they usually rusted in there or hard to reach! __________________ 1978 Chevy Scottdale Stepside, 3rd engine- 350c.i. built with cam and lifters, holley 670cfm carb. and intake,heads shaved .60. Truck is a project, and I am its restorererer!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.