Parting out 83 3/4 2wd Burb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

softballnrd27 · 08-27-2007, 12:56 PM

The only things that I am taking is the 454/th400. everything else is up for grabs. LMK what you want if it is not listed and I can pull it and ship it(if small enough). All the sheetmetal is good with only surface rust and maybe some minor rust. What ever part you are interested in I can take a closer look at and I can take more pics and email them to you.

Big Stuff
Front Clip-$200

Doors-$125 each (elec locks and windows work)

Front and rear bumper $50 ea

Tilt column-$75

14 bolt rear-end 10.5" ring ff minus drum brakes(extra from Jeep project)-$100

anything else needed or that I missed please lmk. Everything is OBO and I the price is to high shoot me an offer. I can ship the smaller stuff at the expense of the buyer and the bigger stuff will have to be picked up unless something else is worked out.

Attachment 293908

C&C Chevy · 08-27-2007, 01:52 PM

Power windows? If so I need the regulator and motor for drivers side. Let me know. Thanks.

skeet85silverado · 08-27-2007, 02:58 PM

How are the vent windows and what do u want for them

softballnrd27 · 08-27-2007, 04:25 PM

I would like to sell the whole but if I can't then I will part them out.

I only have a passenger vent window bc the driver side is missing.

C&C Chevy · 08-27-2007, 04:56 PM

Quote:

Originally Posted by softballnrd27

I would like to sell the whole but if I can't then I will part them out.

OK, PM me if you can't sell whole door. As long as I have dibs on the regulators and motors.

I'll buy both sides if you don't want to seperate the front regulators. Never know when the passenger side will go out.

Kurt L · 08-27-2007, 07:37 PM

blue dash pad? pics please.
popak@bellsouth.net

softballnrd27 · 08-27-2007, 09:41 PM

Dash pad is cracked. If you need more pics of something else lmk.

*project 67 sub* · 08-30-2007, 04:42 AM

do you have the motor mount towers? are they for a small block chevy? if you have them are they in good condition and how much would you possibly want for them? can you get pics of them?

softballnrd27 · 08-30-2007, 09:09 AM

The motor mount towers are for a BB and they are staying with the motor. When I swap out the 305 in my truck for the 454 I will have some extra ones but that won't be for awhile.

crews · 09-03-2007, 12:01 PM

PM sent....

bigblock73 · 09-03-2007, 12:50 PM

The engine mount towers are the same for BB and SB engines....and even six cylinder. There are different holes on the towers for the different engines (that the motor mounts bolt to)...one set for V8's, one set for six cylinders.

conawasa · 09-04-2007, 08:33 PM

Do you have the rear brake lines? I need the ones that split from the main line at the rear differential, coming from the front to each wheel. If you have those let me know how much plus shipping to 43113.
Thanks,
Scott

wildmanaaron · 09-04-2007, 10:15 PM

I would be interested in the Wiper Transmission Arms. These are the arms and studs that the wiper arms attach to. Mine are both broke around the bolts.

mckpaul · 09-05-2007, 09:08 PM

I know you have the front clip up for sale, but if it doesn't sell and it comes to hauling it off, I'd be interested in the grill if it's in good shape.

softballnrd27 · 09-06-2007, 09:53 AM

Sorry, that I haven't been on here for awhile but I might have the whole thing sold as is. If that is the case then I am not going to part it out. I have to get rid of it ASAP bc my housing area wants it gone or registered. I don't want to pay insurance and registration for it so it has to go soon.

08-27-2007, 12:56 PM	#1
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Parting out 83 3/4 2wd Burb The only things that I am taking is the 454/th400. everything else is up for grabs. LMK what you want if it is not listed and I can pull it and ship it(if small enough). All the sheetmetal is good with only surface rust and maybe some minor rust. What ever part you are interested in I can take a closer look at and I can take more pics and email them to you. Big Stuff Front Clip-$200 Doors-$125 each (elec locks and windows work) Front and rear bumper $50 ea Tilt column-$75 14 bolt rear-end 10.5" ring ff minus drum brakes(extra from Jeep project)-$100 anything else needed or that I missed please lmk. Everything is OBO and I the price is to high shoot me an offer. I can ship the smaller stuff at the expense of the buyer and the bigger stuff will have to be picked up unless something else is worked out. Attachment 293908 __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168 Last edited by softballnrd27; 02-20-2011 at 11:01 PM.

08-27-2007, 01:52 PM	#2
C&C Chevy Registered User Join Date: Feb 2003 Location: Midwest City, OK Posts: 1,001	Re: Parting out 83 3/4 2wd Burb Power windows? If so I need the regulator and motor for drivers side. Let me know. Thanks. __________________ Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007

08-27-2007, 02:58 PM	#3
skeet85silverado Registered User Join Date: May 2004 Location: warner robins ga Posts: 158	Re: Parting out 83 3/4 2wd Burb How are the vent windows and what do u want for them

08-27-2007, 04:25 PM	#4
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: Parting out 83 3/4 2wd Burb I would like to sell the whole but if I can't then I will part them out. I only have a passenger vent window bc the driver side is missing. __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168

08-27-2007, 07:37 PM	#6
Kurt L Senior Member Join Date: May 2003 Location: ne florida Posts: 2,665	Re: Parting out 83 3/4 2wd Burb blue dash pad? pics please. popak@bellsouth.net

08-27-2007, 09:41 PM	#7
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: Parting out 83 3/4 2wd Burb Dash pad is cracked. If you need more pics of something else lmk. __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168 Last edited by softballnrd27; 08-27-2007 at 09:42 PM.

08-30-2007, 04:42 AM	#8
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Parting out 83 3/4 2wd Burb do you have the motor mount towers? are they for a small block chevy? if you have them are they in good condition and how much would you possibly want for them? can you get pics of them?

08-30-2007, 09:09 AM	#9
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: Parting out 83 3/4 2wd Burb The motor mount towers are for a BB and they are staying with the motor. When I swap out the 305 in my truck for the 454 I will have some extra ones but that won't be for awhile. __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168

09-03-2007, 12:01 PM	#10
crews It just doesn't matter Join Date: Apr 2001 Location: Huntington Beach, Ca Posts: 1,660	Re: Parting out 83 3/4 2wd Burb PM sent.... __________________ 05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!!

09-03-2007, 12:50 PM	#11
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: Parting out 83 3/4 2wd Burb The engine mount towers are the same for BB and SB engines....and even six cylinder. There are different holes on the towers for the different engines (that the motor mounts bolt to)...one set for V8's, one set for six cylinders. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 09-03-2007 at 12:51 PM.

09-04-2007, 08:33 PM	#12
conawasa Registered User Join Date: Jan 2003 Location: Circleville, Ohio Posts: 20	Re: Parting out 83 3/4 2wd Burb Do you have the rear brake lines? I need the ones that split from the main line at the rear differential, coming from the front to each wheel. If you have those let me know how much plus shipping to 43113. Thanks, Scott __________________ Scott 79 Chevy K10 Blazer 78 Chevy K20 Pickup 98 Chevy 1500 2WD

09-04-2007, 10:15 PM	#13
wildmanaaron Registered User Join Date: Mar 2002 Location: Bowling Green, KY Posts: 396	Re: Parting out 83 3/4 2wd Burb I would be interested in the Wiper Transmission Arms. These are the arms and studs that the wiper arms attach to. Mine are both broke around the bolts.

09-05-2007, 09:08 PM	#14
mckpaul Registered User Join Date: Dec 2002 Location: Houston Posts: 300	Re: Parting out 83 3/4 2wd Burb I know you have the front clip up for sale, but if it doesn't sell and it comes to hauling it off, I'd be interested in the grill if it's in good shape. __________________ Paul 1984 Chevy C-10 LWB/305

09-06-2007, 09:53 AM	#15
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: Parting out 83 3/4 2wd Burb Sorry, that I haven't been on here for awhile but I might have the whole thing sold as is. If that is the case then I am not going to part it out. I have to get rid of it ASAP bc my housing area wants it gone or registered. I don't want to pay insurance and registration for it so it has to go soon. __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.