layin frame 69 pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**brandonh** · 09-08-2007, 12:00 PM

here is my frame im almost done with on my 69 chevrolet

**brandonh** · 09-08-2007, 08:54 PM

must look like crap no one has anything to say about it oh well

royo · 09-08-2007, 08:58 PM

Wow i like it could i get some pics of it from the front and rear also how did get the rear pinon angle like that useing trailing arms

**brandonh** · 09-08-2007, 09:06 PM

the pinion angle has to be changed its sitting down a little i will get some more pictures of it later, its a 3 1/2 front z with trailing arms i made just like stock, and made the rear notch big so the trailing arms would work

royo · 09-08-2007, 09:17 PM

nice work there

**brandonh** · 09-08-2007, 09:25 PM

thank you i really appreciate that , i hope its going to be low, i have ran into alot of problems but getting things worked out.

jlaird · 09-09-2007, 08:32 AM

Quote:

Originally Posted by brandonh

i hope its going to be low,

cant get much lower than that. nice job.

FRENCHBLUE72 · 09-09-2007, 09:39 AM

Are you cutting the rockers off teh truck cause its gonna be low....

**brandonh** · 09-09-2007, 12:06 PM

well i wasnt planning on cutting them but if i have to i have to we will see i hope to just cut pinch weld at the most, it seems like its taking for every to get it done, i will put some more pictures up later.

**brandonh** · 09-09-2007, 03:11 PM

more pictures are at my build thread Fools Gold heres link

http://67-72chevytrucks.com/vboard/s...d.php?t=257593

bagged81 · 09-09-2007, 11:34 PM

I would at least gusset the rad support section with about a 2" gusset. Also, you might want to consider putting some plating around the joints on the backhalf. Looks good though and should look real nice when its painted, haha.

**brandonh** · 09-09-2007, 11:54 PM

ya i know what your saying i will keep that in mind its nice to have people like your work, there are alot of people that like to talk crap on other peoples work and they have never tried anything themselfs, i still have some welding to do on the back so will probably do it then, the truck is at my dads place and i dont get up there all the time so it had to get everything done

L0WRIDE · 09-10-2007, 08:09 AM

BACKYARD88 · 09-10-2007, 02:41 PM

Looks good. I'd do a little more bracing and plating on the rear and maybe a small gusset on the underside of the frame horn where it's dropped but all in all that's a sweet setup. Nice work building all of your own stuff as well

Dinos63 · 09-12-2007, 10:07 PM

Dont worry about all the crap talking , that all stops when you roll bye , and spray there ford with sparks, keep working looks good

*culookn* · 09-13-2007, 09:03 AM

cut the rockers! nice work

09-08-2007, 12:00 PM	#1
brandonh Registered User Join Date: Apr 2000 Location: missouri, USA Posts: 271	layin frame 69 pics here is my frame im almost done with on my 69 chevrolet __________________ Brandon 67 chevy CST 68 chevy stepside US ARMY truck 69 chevy longbed green and white Custom10 05 Honda Rancher AT with 26 inch ITP 589's 2008 Chevy crewcab vortec max 4X4 pickup 1969 Chevrolet layin frame Project Fools Gold http://67-72chevytrucks.com/vboard/s...d.php?t=257593 Last edited by brandonh; 02-19-2008 at 02:33 AM.

09-08-2007, 08:54 PM	#2
brandonh Registered User Join Date: Apr 2000 Location: missouri, USA Posts: 271	Re: layin frame 69 pics must look like crap no one has anything to say about it oh well __________________ Brandon 67 chevy CST 68 chevy stepside US ARMY truck 69 chevy longbed green and white Custom10 05 Honda Rancher AT with 26 inch ITP 589's 2008 Chevy crewcab vortec max 4X4 pickup 1969 Chevrolet layin frame Project Fools Gold http://67-72chevytrucks.com/vboard/s...d.php?t=257593

09-08-2007, 08:58 PM	#3
royo Registered User Join Date: Feb 2007 Location: knoxville tn Posts: 1,013	Re: layin frame 69 pics Wow i like it could i get some pics of it from the front and rear also how did get the rear pinon angle like that useing trailing arms __________________ nickle and dime

09-08-2007, 09:06 PM	#4
brandonh Registered User Join Date: Apr 2000 Location: missouri, USA Posts: 271	Re: layin frame 69 pics the pinion angle has to be changed its sitting down a little i will get some more pictures of it later, its a 3 1/2 front z with trailing arms i made just like stock, and made the rear notch big so the trailing arms would work __________________ Brandon 67 chevy CST 68 chevy stepside US ARMY truck 69 chevy longbed green and white Custom10 05 Honda Rancher AT with 26 inch ITP 589's 2008 Chevy crewcab vortec max 4X4 pickup 1969 Chevrolet layin frame Project Fools Gold http://67-72chevytrucks.com/vboard/s...d.php?t=257593

09-08-2007, 09:17 PM	#5
royo Registered User Join Date: Feb 2007 Location: knoxville tn Posts: 1,013	Re: layin frame 69 pics nice work there __________________ nickle and dime

09-08-2007, 09:25 PM	#6
brandonh Registered User Join Date: Apr 2000 Location: missouri, USA Posts: 271	Re: layin frame 69 pics thank you i really appreciate that , i hope its going to be low, i have ran into alot of problems but getting things worked out. __________________ Brandon 67 chevy CST 68 chevy stepside US ARMY truck 69 chevy longbed green and white Custom10 05 Honda Rancher AT with 26 inch ITP 589's 2008 Chevy crewcab vortec max 4X4 pickup 1969 Chevrolet layin frame Project Fools Gold http://67-72chevytrucks.com/vboard/s...d.php?t=257593

09-09-2007, 09:39 AM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: layin frame 69 pics Are you cutting the rockers off teh truck cause its gonna be low.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-09-2007, 12:06 PM	#9
brandonh Registered User Join Date: Apr 2000 Location: missouri, USA Posts: 271	Re: layin frame 69 pics well i wasnt planning on cutting them but if i have to i have to we will see i hope to just cut pinch weld at the most, it seems like its taking for every to get it done, i will put some more pictures up later. __________________ Brandon 67 chevy CST 68 chevy stepside US ARMY truck 69 chevy longbed green and white Custom10 05 Honda Rancher AT with 26 inch ITP 589's 2008 Chevy crewcab vortec max 4X4 pickup 1969 Chevrolet layin frame Project Fools Gold http://67-72chevytrucks.com/vboard/s...d.php?t=257593

09-09-2007, 03:11 PM	#10
brandonh Registered User Join Date: Apr 2000 Location: missouri, USA Posts: 271	Re: layin frame 69 pics more pictures are at my build thread Fools Gold heres link http://67-72chevytrucks.com/vboard/s...d.php?t=257593 __________________ Brandon 67 chevy CST 68 chevy stepside US ARMY truck 69 chevy longbed green and white Custom10 05 Honda Rancher AT with 26 inch ITP 589's 2008 Chevy crewcab vortec max 4X4 pickup 1969 Chevrolet layin frame Project Fools Gold http://67-72chevytrucks.com/vboard/s...d.php?t=257593

09-09-2007, 11:34 PM	#11
bagged81 Signals in the bumper. Join Date: Feb 2003 Location: East TN Posts: 856	Re: layin frame 69 pics I would at least gusset the rad support section with about a 2" gusset. Also, you might want to consider putting some plating around the joints on the backhalf. Looks good though and should look real nice when its painted, haha. __________________ Jeff C. 1981 Chevrolet Silverado - Under major construction...again. link 1962 Chevrolet Impala 4D Sedan moredoorclassics.com 1936 Ford Pickup - Frame-off in progress link 1979 Chevrolet Camper Special Flatbed link

09-09-2007, 11:54 PM	#12
brandonh Registered User Join Date: Apr 2000 Location: missouri, USA Posts: 271	Re: layin frame 69 pics ya i know what your saying i will keep that in mind its nice to have people like your work, there are alot of people that like to talk crap on other peoples work and they have never tried anything themselfs, i still have some welding to do on the back so will probably do it then, the truck is at my dads place and i dont get up there all the time so it had to get everything done __________________ Brandon 67 chevy CST 68 chevy stepside US ARMY truck 69 chevy longbed green and white Custom10 05 Honda Rancher AT with 26 inch ITP 589's 2008 Chevy crewcab vortec max 4X4 pickup 1969 Chevrolet layin frame Project Fools Gold http://67-72chevytrucks.com/vboard/s...d.php?t=257593

09-10-2007, 08:09 AM	#13
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: layin frame 69 pics __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

09-10-2007, 02:41 PM	#14
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: layin frame 69 pics Looks good. I'd do a little more bracing and plating on the rear and maybe a small gusset on the underside of the frame horn where it's dropped but all in all that's a sweet setup. Nice work building all of your own stuff as well __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

09-12-2007, 10:07 PM	#15
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: layin frame 69 pics Dont worry about all the crap talking , that all stops when you roll bye , and spray there ford with sparks, keep working looks good

09-13-2007, 09:03 AM	#16
culookn Account Suspended Join Date: Jun 2006 Location: nj Posts: 194	Re: layin frame 69 pics cut the rockers! nice work



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.