09-06-2007, 01:00 AM | #2 |
Registered User
Join Date: Feb 2007
Location: Los Angeles
Posts: 674
|
Re: Drop spindle question
Yah you can check out the Truck and Car shop http://www.truckandcarshop.com/
and or Classic Performance Products http://www.classicperform.com/ |
09-06-2007, 07:11 AM | #3 |
Registered User
Join Date: Aug 2007
Location: Tyler, TX
Posts: 30
|
Re: Drop spindle question
I have not been able to find any that will bolt in using stock upper ball joints and retaining drum brakes, however I have heard now that they do exist.
|
09-06-2007, 05:55 PM | #5 |
Registered User
Join Date: Aug 2007
Location: Tyler, TX
Posts: 30
|
Re: Drop spindle question
|
09-06-2007, 05:56 PM | #6 |
Registered User
Join Date: Aug 2007
Location: Tyler, TX
Posts: 30
|
Re: Drop spindle question
You could always channel it and drop the body down a few inches to lower it with out touching the suspension.
|
09-15-2007, 03:48 AM | #8 |
Registered User
Join Date: Jan 2007
Location: San Jose
Posts: 847
|
Re: Drop spindle question
All I have seen is for disc. It's an easyswap, and if you want to save some bucks, you might bea able to order all your brake parts through kragens except for the rotors.
|
09-21-2007, 08:38 PM | #9 |
Registered User
Join Date: Aug 2006
Location: rogersville tennessee
Posts: 276
|
Re: Drop spindle question
not sure if it is something you would consider, but lmc does offer a 2"/3", or 2"/4" lowering kit which doesn't require nothing more than front springs, rear springs and front shocks, or rear shocks . nothing else on the suspension.
|
09-21-2007, 09:27 PM | #10 |
Registered User
Join Date: May 2007
Location: Temple Texas
Posts: 399
|
Re: Drop spindle question
That wouldn't work for me. What I want to do is put 2 1/2" drop spindles with 2 inch drop springs in the front with 6 inch drop springs in the rear.
|
Bookmarks |
|
|