83 column to 66 wiring? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

steverino66 · 11-07-2007, 01:43 PM

Okay, guys, tried the electrical area with no luck, hoping someone here has done this recently:
I'm wiring an 83 C10 tilt column I've put into my 66 project (still using its 66 factory wiring on the firewall and front end). I want to use the column ignition switch/neutral safety and turn signal on the 83 column.
I have a wiring diagram for the 66 but can only guess about the 83 wiring coming from the column - it's still attached to its fuse box, also pulled from the donor truck.
I'm not completely rewiring the truck right now, I'll someday get a new complete harness, but any help/suggestions on putting these wires together would be greatly appreciated.

11-07-2007, 01:43 PM	#1
steverino66 Registered User Join Date: Oct 2005 Location: oklahoma Posts: 663	83 column to 66 wiring? Okay, guys, tried the electrical area with no luck, hoping someone here has done this recently: I'm wiring an 83 C10 tilt column I've put into my 66 project (still using its 66 factory wiring on the firewall and front end). I want to use the column ignition switch/neutral safety and turn signal on the 83 column. I have a wiring diagram for the 66 but can only guess about the 83 wiring coming from the column - it's still attached to its fuse box, also pulled from the donor truck. I'm not completely rewiring the truck right now, I'll someday get a new complete harness, but any help/suggestions on putting these wires together would be greatly appreciated. Last edited by steverino66; 11-07-2007 at 01:43 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.