Hood Insulation - The 1947 - Present Chevrolet & GMC Truck Message Board Network

daveo68 · 11-28-2007, 06:33 PM

Anyone know how under hood insulators are installed?
Thanks,
Dave

daveo68 · 11-28-2007, 09:36 PM

ttt

**SactoJim** · 11-28-2007, 10:57 PM

Doing mine right now and should have some pics by the weekend or so.

daveo68 · 11-29-2007, 09:08 AM

Pics would be good. I saw in LMC catalog the hood insulation and was trying to figure out how it is installed.

68gmsee · 11-29-2007, 10:05 AM

What is the hood insulation for? Is it for noise?

It's so noisy in my truck cab, I can't hear the engine. I'm just running a stock 250.

**SactoJim** · 11-29-2007, 01:29 PM

Hood insulation really makes a difference when closing the hood and getting rid of that "tinny" sound.....makes it sound alot more solid. I also have a small supercharger on my motor that at idle has some gear lash that I hate the sound of and the insulation makes it inaudible when the hood is closed. The insulation also dramatically reduces heat transfer from the motor to the hood surface.

I'm using foil sided insulation and running it under the supports (got rid of rubber insulators), trying to make it look as nice as possible. I'll shoot some pics "if" it turns out like I want.

daveo68 · 11-30-2007, 05:12 PM

I think LMC has the rubber insulators. This is what I looking at to install.

**SactoJim** · 11-30-2007, 05:51 PM

Quote:

Originally Posted by daveo68

I think LMC has the rubber insulators. This is what I looking at to install.

You at least want those, otherwise the hood skin flaps up and down as your driving along!

daveo68 · 12-01-2007, 08:34 AM

Do you know how that is installed? My hood has none of that.
Thanks

daveo68 · 12-01-2007, 03:31 PM

ttt

chevy72blu · 12-01-2007, 03:46 PM

Just use a small taper between the support and the hood to slide the rubber pieces in. SLiding the taper out compresses it between the hood and support, holding it in place.

Im thinking about Dynamating the underside of my hood, but it may look tacky...

daveo68 · 12-01-2007, 04:02 PM

I'm waiting to see how SactoJim's turns out. If it works okay I will attempt to install.

**SactoJim** · 12-01-2007, 05:36 PM

Here ya go Dave...

Just got done messing with it over lunch. It is a definate case of "function over form", but it does make a HUGE difference in the "tinny" hood sound (nice dull thud now).

It turned out ok....pretty much what I expected, and I don't know how much better it could get with any of the foil backed products out there.

You can see in the pic a piece of round aluminum rod at the hood ridge that I think I'm gonna attach to the hood structure just to make sure the insulation never sags.

Watcha guys think?

daveo68 · 12-02-2007, 07:40 AM

That looks pretty good, might have me a new project to attempt.
Thanks

**SactoJim** · 12-02-2007, 10:59 AM

Got the hood back on last night and boy, what a difference....nice solid "thud" when shutting the hood and it just about eliminates hearing the motor from the outside of the truck. Also eliminates most of the engine heat transfer to the hood exterior.

OldCreek · 12-02-2007, 08:55 PM

Quote:

Originally Posted by SactoJim

Got the hood back on last night and boy, what a difference....nice solid "thud" when shutting the hood and it just about eliminates hearing the motor from the outside of the truck. Also eliminates most of the engine heat transfer to the hood exterior.

Do you hear less from inside the cab?

11-28-2007, 06:33 PM	#1
daveo68 Senior Member Join Date: Dec 2001 Location: Lexington,NC Posts: 503	Hood Insulation Anyone know how under hood insulators are installed? Thanks, Dave __________________ 68 C-10 Custom LWB 307 V8 Lexington,NC davideowens@lexcominc.net God Bless America Last edited by daveo68; 12-01-2007 at 03:29 PM.

11-28-2007, 09:36 PM	#2
daveo68 Senior Member Join Date: Dec 2001 Location: Lexington,NC Posts: 503	Re: Hood Insulation ttt __________________ 68 C-10 Custom LWB 307 V8 Lexington,NC davideowens@lexcominc.net God Bless America

11-28-2007, 10:57 PM	#3
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: Hood Insulation Doing mine right now and should have some pics by the weekend or so. __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

11-29-2007, 09:08 AM	#4
daveo68 Senior Member Join Date: Dec 2001 Location: Lexington,NC Posts: 503	Re: Hood Insulation Pics would be good. I saw in LMC catalog the hood insulation and was trying to figure out how it is installed. __________________ 68 C-10 Custom LWB 307 V8 Lexington,NC davideowens@lexcominc.net God Bless America

11-29-2007, 10:05 AM	#5
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: Hood Insulation What is the hood insulation for? Is it for noise? It's so noisy in my truck cab, I can't hear the engine. I'm just running a stock 250.

11-29-2007, 01:29 PM	#6
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: Hood Insulation Hood insulation really makes a difference when closing the hood and getting rid of that "tinny" sound.....makes it sound alot more solid. I also have a small supercharger on my motor that at idle has some gear lash that I hate the sound of and the insulation makes it inaudible when the hood is closed. The insulation also dramatically reduces heat transfer from the motor to the hood surface. I'm using foil sided insulation and running it under the supports (got rid of rubber insulators), trying to make it look as nice as possible. I'll shoot some pics "if" it turns out like I want. __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

11-30-2007, 05:12 PM	#7
daveo68 Senior Member Join Date: Dec 2001 Location: Lexington,NC Posts: 503	Re: Hood Insulation I think LMC has the rubber insulators. This is what I looking at to install. __________________ 68 C-10 Custom LWB 307 V8 Lexington,NC davideowens@lexcominc.net God Bless America Last edited by daveo68; 11-30-2007 at 05:13 PM. Reason: Spelling

12-01-2007, 08:34 AM	#9
daveo68 Senior Member Join Date: Dec 2001 Location: Lexington,NC Posts: 503	Re: Hood Insulation Do you know how that is installed? My hood has none of that. Thanks __________________ 68 C-10 Custom LWB 307 V8 Lexington,NC davideowens@lexcominc.net God Bless America

12-01-2007, 03:31 PM	#10
daveo68 Senior Member Join Date: Dec 2001 Location: Lexington,NC Posts: 503	Re: Hood Insulation ttt __________________ 68 C-10 Custom LWB 307 V8 Lexington,NC davideowens@lexcominc.net God Bless America

12-01-2007, 03:46 PM	#11
chevy72blu Registered User Join Date: Apr 2004 Location: Las Vegas, NV Posts: 2,189	Re: Hood Insulation Just use a small taper between the support and the hood to slide the rubber pieces in. SLiding the taper out compresses it between the hood and support, holding it in place. Im thinking about Dynamating the underside of my hood, but it may look tacky... __________________ RIP EastSideLowLife '72 C20 SWB convert. 5 lug, LS1/4l60e

12-01-2007, 04:02 PM	#12
daveo68 Senior Member Join Date: Dec 2001 Location: Lexington,NC Posts: 503	Re: Hood Insulation I'm waiting to see how SactoJim's turns out. If it works okay I will attempt to install. __________________ 68 C-10 Custom LWB 307 V8 Lexington,NC davideowens@lexcominc.net God Bless America Last edited by daveo68; 12-01-2007 at 04:02 PM.

12-01-2007, 05:36 PM	#13
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: Hood Insulation Here ya go Dave... Just got done messing with it over lunch. It is a definate case of "function over form", but it does make a HUGE difference in the "tinny" hood sound (nice dull thud now). It turned out ok....pretty much what I expected, and I don't know how much better it could get with any of the foil backed products out there. You can see in the pic a piece of round aluminum rod at the hood ridge that I think I'm gonna attach to the hood structure just to make sure the insulation never sags. Watcha guys think? __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

12-02-2007, 07:40 AM	#14
daveo68 Senior Member Join Date: Dec 2001 Location: Lexington,NC Posts: 503	Re: Hood Insulation That looks pretty good, might have me a new project to attempt. Thanks __________________ 68 C-10 Custom LWB 307 V8 Lexington,NC davideowens@lexcominc.net God Bless America

12-02-2007, 10:59 AM	#15
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: Hood Insulation Got the hood back on last night and boy, what a difference....nice solid "thud" when shutting the hood and it just about eliminates hearing the motor from the outside of the truck. Also eliminates most of the engine heat transfer to the hood exterior. __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.