custom threshold plates - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

clemson71guy · 11-27-2007, 09:52 AM

just to clear everything up
these will not be for sell by me
maybe LMC or someone will get smart and cut the bowtie in it someday

c10crazy · 11-27-2007, 11:24 AM

LMC sells them polished for $24.95 for a pair but they would look better with a Bowtie like yours!

clemson71guy · 11-27-2007, 05:48 PM

yeah i saw them in LMC
but i guss they dont wanna spend the extra money to cut the bowtie in it.

clemson71guy · 11-27-2007, 07:36 PM

here is the drawing that we drew up in autocad

clemson71guy · 11-27-2007, 07:44 PM

and here the design i wanted to go with but it wouldent fit

Rdrdave · 11-29-2007, 04:16 PM

Quote:

Originally Posted by clemson71guy

thanks i just dont know what im going to use to hold it down
we thought about putting 4 holes in it and screw it in but we passed on that idea

some nice countersunk flattop polished stainless screws would look nice.

clemson71guy · 11-29-2007, 07:50 PM

thats a good idea
thats probally what i will end up doing
thanks

clemson71guy · 01-23-2008, 04:44 AM

well it looks like lmc made some that looks like mine
only we made mine for 10 dollars and threre cost 130, but lmc's looks way better

chev74 · 01-23-2008, 04:55 AM

i think yours look way better. they will be sturdier as well. the metal they use is very thin gauge

11-27-2007, 09:52 AM	#26
clemson71guy Registered User Join Date: Oct 2007 Location: north carolina Posts: 470	Re: custom threshold plates just to clear everything up these will not be for sell by me maybe LMC or someone will get smart and cut the bowtie in it someday

11-27-2007, 11:24 AM	#27
c10crazy Like a Rock! Join Date: May 2002 Location: USA Posts: 1,092	Re: custom threshold plates LMC sells them polished for $24.95 for a pair but they would look better with a Bowtie like yours! __________________ 69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park! Last edited by c10crazy; 11-27-2007 at 11:24 AM.

11-27-2007, 05:48 PM	#28
clemson71guy Registered User Join Date: Oct 2007 Location: north carolina Posts: 470	Re: custom threshold plates yeah i saw them in LMC but i guss they dont wanna spend the extra money to cut the bowtie in it.

11-27-2007, 07:36 PM	#29
clemson71guy Registered User Join Date: Oct 2007 Location: north carolina Posts: 470	Re: custom threshold plates here is the drawing that we drew up in autocad

11-27-2007, 07:44 PM	#30
clemson71guy Registered User Join Date: Oct 2007 Location: north carolina Posts: 470	Re: custom threshold plates and here the design i wanted to go with but it wouldent fit

11-29-2007, 07:50 PM	#32
clemson71guy Registered User Join Date: Oct 2007 Location: north carolina Posts: 470	Re: custom threshold plates thats a good idea thats probally what i will end up doing thanks

01-23-2008, 04:44 AM	#33
clemson71guy Registered User Join Date: Oct 2007 Location: north carolina Posts: 470	Re: custom threshold plates well it looks like lmc made some that looks like mine only we made mine for 10 dollars and threre cost 130, but lmc's looks way better Attached Images

01-23-2008, 04:55 AM	#34
chev74 Addicted to Chevy Join Date: Dec 2004 Location: Tyler, Tx Posts: 857	Re: custom threshold plates i think yours look way better. they will be sturdier as well. the metal they use is very thin gauge



Register or Log In To remove these advertisements.