power steering pump bracket for a conversion on a 1963 c-10 6-inline - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jimbo0555 · 01-13-2008, 11:56 AM

can anyone tell me where i can look for a bracket that will work for my 63 chevy 6 inline engine ? or possibly another vehicle i can get it off of,please help.thanks

TimE · 01-13-2008, 12:15 PM

Ebay or a junkyard would be your best bet, IMO.

**slepysal** · 01-13-2008, 12:46 PM

What 6 do you have? I was able to get one for my 250 off of e bay,(NOT CHEEP ) I had to modify it to fit my headers.
I might have one for a newer 250 that you might make work.

baddawg65 · 01-13-2008, 03:37 PM

There are a couple on ebay for a 250, they are usually pretty easy to find. But if you have a 292 good luck!!!
http://cgi.ebay.com/ebaymotors/Chevy...spagenameZWDVW

greg64 · 01-13-2008, 07:30 PM

jimbo, a couple of cautions (I searched out one of these for my 250 years ago). Clearly the 230/250 and 292 are different. But, more than that, the truck and van are different too. Have a look at the crank pulleys and their spacing to make sure the bracket will fit. Of course, I didn't initially know this, so I ended up with a 250 van bracket (thought I'd struck gold when I found it in the yard). I was able to modify the bracket with a bit of steel and some welding to make it work (correcting for the belt alignment).

Next problem... the bracket won't easily clear non-stock intakes and exhaust.

You can also look at Novas and Pontiac Venturas as they all used these engines as well. The van just seemed to be the best bet, because being the heaviest the chances that it had power steering are better.

Oh, and the 250 "integral head" uses a different bracket as well (non-interchangable, and I have one of those as well....)

Fun fun fun!

Old Bluey · 01-26-2008, 06:36 AM

Hey Greg! If you've got any info where another 250 PS brack could be found in the lower mainland (B.C.), that would be awesome!

01-13-2008, 11:56 AM	#1
jimbo0555 Registered User Join Date: Jan 2008 Location: whittier,california Posts: 7	power steering pump bracket for a conversion on a 1963 c-10 6-inline can anyone tell me where i can look for a bracket that will work for my 63 chevy 6 inline engine ? or possibly another vehicle i can get it off of,please help.thanks

01-13-2008, 12:15 PM	#2
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: power steering pump bracket for a conversion on a 1963 c-10 6-inline Ebay or a junkyard would be your best bet, IMO.

01-13-2008, 12:46 PM	#3
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: power steering pump bracket for a conversion on a 1963 c-10 6-inline What 6 do you have? I was able to get one for my 250 off of e bay,(NOT CHEEP ) I had to modify it to fit my headers. I might have one for a newer 250 that you might make work. __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " Last edited by slepysal; 01-13-2008 at 12:46 PM.

01-13-2008, 03:37 PM	#4
baddawg65 Registered User Join Date: Mar 2007 Location: wyoming Posts: 83	Re: power steering pump bracket for a conversion on a 1963 c-10 6-inline There are a couple on ebay for a 250, they are usually pretty easy to find. But if you have a 292 good luck!!! http://cgi.ebay.com/ebaymotors/Chevy...spagenameZWDVW __________________ l6 Performance Parts http://www.merchantamerica.com/chevy...ex.php?ba=home BOTHERS http://www.brotherstrucks.com/ LMC http://www.lmctruck.com/ Dash LEDs http://www.whitegauges.net/index.php

01-13-2008, 07:30 PM	#5
greg64 Registered User Join Date: Dec 2007 Location: Kimberley, BC, Canada Posts: 799	Re: power steering pump bracket for a conversion on a 1963 c-10 6-inline jimbo, a couple of cautions (I searched out one of these for my 250 years ago). Clearly the 230/250 and 292 are different. But, more than that, the truck and van are different too. Have a look at the crank pulleys and their spacing to make sure the bracket will fit. Of course, I didn't initially know this, so I ended up with a 250 van bracket (thought I'd struck gold when I found it in the yard). I was able to modify the bracket with a bit of steel and some welding to make it work (correcting for the belt alignment). Next problem... the bracket won't easily clear non-stock intakes and exhaust. You can also look at Novas and Pontiac Venturas as they all used these engines as well. The van just seemed to be the best bet, because being the heaviest the chances that it had power steering are better. Oh, and the 250 "integral head" uses a different bracket as well (non-interchangable, and I have one of those as well....) Fun fun fun! __________________ Greg 64 GMC Suburban - 283, NV3500, 14 bolt 77 C10 swb - 292, SM465, 12 bolt

01-26-2008, 06:36 AM	#6
Old Bluey Registered User Join Date: Jan 2008 Location: Anmore BC Posts: 78	Re: power steering pump bracket for a conversion on a 1963 c-10 6-inline Hey Greg! If you've got any info where another 250 PS brack could be found in the lower mainland (B.C.), that would be awesome!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.