|
01-20-2003, 06:09 PM
|
#1 |
|
dropped69
Join Date: Jan 2003
Location: Grand Canyon State
Posts: 120
|
Coil Springs Question
Hi there again folks, could someone here please tell me if some stock coil springs from a 69-70 3/4 ton c20 would fit on my 69 c10? my neighbor across the street has a 72 c10 and he said that his coil springs were 3/4 ton coil springs...so I shouldn't have any problems switching the ones from the 3/4 ton to my 1/2 would i? also whats the difference between the 1/2 and 3/4? does it make the truck look any different than if it had 1/2 coil springs? thanks
|
|
|
|
01-20-2003, 09:06 PM
|
#2 |
|
Registered User
Join Date: Nov 2002
Posts: 461
|
Should ne no problem, the spring rate is what changes, the coils themselves will only increase slightly in diameter. Overall, they should fit just fine.
good luck! |
|
|
|
|
01-22-2003, 11:39 PM
|
#3 |
|
Account Suspended
Join Date: Jan 2003
Location: il
Posts: 115
|
will fit and work, yes, the weight rating of them isnt hugely different from 1/2 ton to 3/4 ton, would have to look in specs sheets again to be specific, can use 64-87 coils
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
