Ten months and ten days ago.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slammed70 · 03-24-2008, 07:36 PM

My idiot brother rearended my parked truck...

these pics dont do the damage that much justice, its worse than it looks.

Now, here I am just under a year later and Ive finally decided to do something about it.

I scored a new 'gate for $25 at a local yard, Ill post a pic of it later...need to dig the camera out. And gonna mock up the pan and get it ready for primer.

But now Im in trouble....I cant get the 'gate open thanks to the dent. Any ideas how to get the gate off without opening it? I can only get it open about 2 inchs...

PanelDeland · 03-24-2008, 07:38 PM

Sawzall? Just a thought.

70GMCer · 03-24-2008, 07:49 PM

Did you rear end him with your foot??

68C15 · 03-24-2008, 08:26 PM

Quote:

Originally Posted by PanelDeland

Sawzall? Just a thought.

my thoughts exactly. save the dented portion for him as a reminder.

Slammed70 · 03-24-2008, 08:28 PM

Quote:

Originally Posted by 70GMCer

Did you rear end him with your foot??

I wanted to, but out mum wouldnt let us....he has ADHD or what ever so hes "special" which means he can do anything and use that as a crutch to get away with it.

Im not to mad about the 'gate, its just that he lied about. Then after his own friends, and my neighbor witnessed it. He finally confessed to it, but them he went around bragging about it. And how he dont have to pay to fix it....

Hes worthless.

Where would I cut with the sawzall? Ive never had the 'gate off any truck in my life. Now that I think about it I dont think Ive ever had the 'gate open in this truck.

stllookn · 03-24-2008, 08:33 PM

If you got a decent gate that only needs paint for $25....BIG SCORE!

Sawzall

Rokcrln · 03-24-2008, 08:40 PM

Quote:

Originally Posted by Slammed70

Where would I cut with the sawzall? Ive never had the 'gate off any truck in my life. Now that I think about it I dont think Ive ever had the 'gate open in this truck.

Right down the center and it will pop right open, OR you can cut the lower hinge with the sawzall. If you look right at the bottom of the gate you will see what looks llike a small pipe that slides into the gate. If tou hold the saw straite up you can slice the pipe in half then remove the gate with out cutting it. The bottom hinge part is easy and cheap at the yard were you got the gate and two bolts and it is off.

Kevin
LFD Inc.

Slammed70 · 03-24-2008, 08:43 PM

Theres just a bit of surphace rust, nothing a scotch-brighted dotco cant take care of.

Im with y'all on the sawzall. Just dont know where to cut.

bluboti · 03-24-2008, 09:00 PM

Get a sledge and pound out from the inside of the gate. Save alot of blades that way. You know what they say " Get a bigger hammer!"

Longhorn Man · 03-24-2008, 10:28 PM

have your brother hold the latch open while you kick it from the inside.

kyull67 · 03-24-2008, 11:24 PM

Quote:

Originally Posted by Longhorn Man

have your brother hold the latch open while you kick it from the inside.

Yes, do that!

bluboti · 03-24-2008, 11:38 PM

Yes! I like that idea better! LMFAO!!

Slammed70 · 03-24-2008, 11:48 PM

Quote:

Originally Posted by Longhorn Man

have your brother hold the latch open while you kick it from the inside.

Will that work? Im trying to not cut up the bes as much as possible. I might try to repair it/learn body work on it. Or I might just hack it up and use patchs from it as a filler panel for my old latch opening and do the relocation to the inside thing.

Quote:

Originally Posted by Slammed70

....surphace.....

Wow, that makes me feel dumb.

Slammed70 · 03-25-2008, 12:44 AM

Here, I snuck out and took a few pics..

It probably dont look that good....but its arrow straight.

Longhorn Man · 03-25-2008, 01:24 AM

you won't do any damage to the truck by kickin the gate. You may bow the gate depending on your size and leg power.
However, it might hurt his hand a little.

(not injuy, just hurt)

Mister laugh · 03-25-2008, 07:18 AM

better than my gate, it has a big dent and now it wont stay shut.

03-24-2008, 07:38 PM	#2
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Ten months and ten days ago.... Sawzall? Just a thought. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

03-24-2008, 07:49 PM	#3
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Ten months and ten days ago.... Did you rear end him with your foot?? __________________ 1997 GMC Sierra Ext 1965 Mustang

03-24-2008, 08:33 PM	#6
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: Ten months and ten days ago.... If you got a decent gate that only needs paint for $25....BIG SCORE! Sawzall __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

03-24-2008, 09:00 PM	#9
bluboti Registered User Join Date: Mar 2008 Location: Gig Harbor, WA Posts: 29	Re: Ten months and ten days ago.... Get a sledge and pound out from the inside of the gate. Save alot of blades that way. You know what they say " Get a bigger hammer!" __________________

03-24-2008, 10:28 PM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Ten months and ten days ago.... have your brother hold the latch open while you kick it from the inside.

03-24-2008, 11:38 PM	#12
bluboti Registered User Join Date: Mar 2008 Location: Gig Harbor, WA Posts: 29	Re: Ten months and ten days ago.... Yes! I like that idea better! LMFAO!! __________________

03-25-2008, 01:24 AM	#15
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Ten months and ten days ago.... you won't do any damage to the truck by kickin the gate. You may bow the gate depending on your size and leg power. However, it might hurt his hand a little. (not injuy, just hurt)

03-25-2008, 07:18 AM	#16
Mister laugh Registered User Join Date: Jun 2007 Location: Edmonton, Alberta Posts: 423	Re: Ten months and ten days ago.... better than my gate, it has a big dent and now it wont stay shut.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.