|
01-23-2003, 11:41 AM
|
#1 |
|
Car Knocker
Join Date: May 2001
Location: jefferson,arkansas
Posts: 664
|
Ignition problems
Bought an Accel blueprint HEI distubuter the other day. Now I seam to have a problem with low speed cruising. Acts like a rev limiter kicking in. So I unpluged my tach, Mallory w/limiter and shift light. Still does it, but not all time. Think that my vac.advance is not adjusted correctly? Have adjusted many times but won't get right. Anybody know if this dist. has a proformance module? My Jaccobs box says that I have to use a stock module. Could this be my problem? Looked in paperwork on distrubuter but doesn't say anything about module. And I have already sold my stock one . Thanks
__________________
68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit. |
|
|
|
01-23-2003, 06:28 PM
|
#2 |
|
Car Knocker
Join Date: May 2001
Location: jefferson,arkansas
Posts: 664
|
ttt
__________________
68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit. |
|
|
|
|
01-24-2003, 10:27 AM
|
#3 |
|
Car Knocker
Join Date: May 2001
Location: jefferson,arkansas
Posts: 664
|
ttt
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
