|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-22-2002, 09:30 AM
|
#1 |
|
Registered User
Join Date: May 2000
Location: Flin Flon, Manitoba, Canada
Posts: 8,853
|
Flywheel question when going from a 6 to 8
if I am going to still use the original 3 speed tranny, should i still use the I-6 flywheel or use the one on the 350?
------------------ currently 1972 Long fleetside 250, inline 6 with 3 speed manual Soon to have a freshened up 350 staying with the 3 spd new rally wheels fresh paint custom flatbed with stacks!!!
__________________
My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795 |
|
|
|
05-22-2002, 10:34 AM
|
#2 |
|
Registered User
Join Date: Apr 2000
Location: Leesburg, GA
Posts: 746
|
I can't remember if you had a 10" or 11" clutch. If you have an 11" clutch your flywheel is the same as a truck with a small block and will take a 12" clutch. If you have a 10" clutch it will still work. That flywheel was used on lower hp small blocks. If you plan on replacing the clutch when you do the conversion I would probably try to get a flywheel that will take an 11"/12" clutch since you will be towing stuff.
__________________
FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed |
|
|
|
|
05-22-2002, 12:06 PM
|
#3 |
|
Registered User
Join Date: Apr 2002
Location: Tulsa, OK, USA
Posts: 117
|
I used the I6 flywheel & clutch when I did my swap just to save some money. I have since acquired a heavy-duty 11" clutch/flywheel and plan to put it in later when I can also change the tranny to an overdrive.
__________________
'72 LWB Stepside |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
