I would spend the cash on the 2 1/2" drop spindle if you can. The 2" drop spring will work, but should have an aftermarket shock(a bit shorter), or a top relocator bracket to keep the shock centered in its travel. Chances are by the time you get there.....you could have almost bought the spindle. Good luck.....crazyL 
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
|
01-26-2003, 04:55 PM
Hybrid Mode
